Comigo CMGSBOF9C1 CMG-SBO-H User Manual Chitram TV UG PAC200031 Rev 1 20141015 1 COMIGO
Comigo Ltd. CMG-SBO-H Chitram TV UG PAC200031 Rev 1 20141015 1 COMIGO
Comigo >
Users Manual
Chitram Galaxy HD Quick User Guide What’s in the box? Chitram Galaxy HD Remote Control (including batteries and a plastic tab) HDMI cable Ethernet cable Power adapter Setting up your system Important: the power adapter is the last one to be connected (it should be plugged-in only after the HDMI and the Ethernet cables are plugged-in) Step Prepare the: remote control: Using a 3.0mm flat head screw driver, insert it into Remove the plastic tab battery contact before the to ba enable ery lid slot Chitram Galaxy HD HDMI cable: Connect the HDMI cable to Chitram Galaxy HD and to your TV Power adapter: Ethernet cable: If you use a wired network, connect the cable to the Chitram Galaxy HD and to your router. Connect the power adapter to your Chitram Galaxy HD and to the wall outlet If you use a wireless network you will be able to set it up during the welcome process (see page 8). Remote control Control Side mouse change the channel aspect ratio Keyboard Side Chitram Galaxy HD STBY content information last TV channel navigation buttons system menu socialize with your friends toggles main menu dashboard of your favorite activities user login system information letters / other characters Completing the setup: 1. Turn on your TV, make sure it’s tuned to the same HDMI input your Chitram Galaxy HD is connected to 2. You will either see a “Welcome” screen, or a Comigo logo screen (if so, please wait about one minute for a “Welcome” screen to appear) 3. Continue following the on-screen instructions and you will be able to: • Set up your internet connection • Adjust screen size to your TV Congratulations – you are now connected! Pressing the Up/Down arrows on the 4-way navigation keys of the Remote Control will allow you to view the list of available channels Having trouble completing the guided setup? Check out pages 12-13 * Note: D uring the initial setup the Chitram Galaxy HD will reset itself. 4. Enter your Chitram TV user information 5. Chitram TV setup: • • • • Choose your server Choose your picture quality (bitrate) Set necessary time shift Change code for restricted channels Learn more about Chitram Galaxy HD • Access Multimedia network or on a hard drive connected to your Chitram Galaxy HD: whether it’s music, photos or personal content • Browse the web and enjoy the wide variety of internet based content • Access the VOD library • Access Online Videos to watch videos which were shared by your friends in Facebook • Explore and search for friends or content and other items, • Control and more • Enjoy some Android Apps 10 Please note: Chitram Galaxy HD features are constantly being enhanced and enriched. Therefore, you will always be able to enjoy our new various features and capabilities as will be released from time to time. All you have to do is just keep your Chitram Galaxy HD plugged in and connected to the internet so that it can download the latest software updates automatically. 11 Troubleshooting • on the “Network connection” screen Black screen? Your TV does not display a Comigo screen? 5. If your network has security-enabled then make Make sure your TV input source matches the physical connection used to connect your Chitram Galaxy HD. Press the Input selection button (also called Source) on your TV or TV Remote to cycle through the various video inputs until you see a Comigo screen. • You cannot see a picture on your TV? sure you input the correct password (casesensitive) • Step : 1 1. Make sure your TV is turned on Changing the remote control batteries: Step : 1 are Using 3.0mm flat head When the batteries low,a replace it screw driver, insert it into another CR2032 batteries the ba ery lid slot Using a 3.0mm flat head with screw driver, insert it into the ba ery lid slot 2. Make sure all connectors are pushed in properly 3. Make sure that the Chitram Galaxy HD is connected to the power and turned on (front panel LED should be green) • Cannot connect to your wireless home network during the setup? 1. For Wi-Fi operation you need to ensure that you have at least the minimum required signal strength. If you are not getting 2 or more signal-strength bars in the“wireless network” setup screen, then adjust the location of your Chitram Galaxy HD and/ or the location of your wireless router Step : 2 Push toward the remote to open the Ba ery Lid Push toward the open the Ba ery 2. Make sure there are no obstructions, like cement walls, between your Chitram Galaxy HD and your wireless router 3. Make sure you select “Wireless” and not “Ethernet” on the “Network connection” screen 4. Make sure you select the correct wireless router name 12 13 FCC part 15.19: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: RGE-CMGSBOF9C1 FCC part 15.105: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio TV technician for help interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. AVIS D’INDUSTRY CANADA (IC) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Déclaration d’Industrie Canada (IC) sur l’Exposition aux Rayonnements : Cet équipement est conforme aux limites d’exposition aux rayonnements définie par l'IC RSS-102 pour un environnement non contrôlé. Cet équipement doit être installé et utilisé en gardant une distance minimale de 20 cm entre le système radiant et vous. FCC part 15.21: Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. to Exposure to radio frequency energy: This device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter. To comply with FCC RF exposure requirements, only use supplied antenna. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated with a separation distance of at least 20 cm from all persons. INDUSTRY CANADA (IC) COMPLIANCE NOTICE This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause 14 Intellectual Property and Other Notices The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. COMIGO® and any proprietary product or service names contained in this document are either trademarks or registered trademarks of Comigo Ltd. and may not be copied, imitated or used, in whole or in part, without the prior written permission of Comigo Ltd. All other trademarks, registered trademarks, product names, service names and company names or logos mentioned herein are the property of their respective owners. 15 Need help or assistance? Just visit www.chitram.tv Rev-1 P/N: PAC200031
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Format : application/pdf Title : Chitram TV UG PAC200031 Rev-1 20141015.1_COMIGO Metadata Date : 2014:12:24 18:15:38+08:00 Modify Date : 2014:12:24 18:15:38+08:00 Create Date : 2014:12:24 18:15:38+08:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 256 Thumbnail Height : 108 Thumbnail Format : JPEG Thumbnail Image : (Binary data 8169 bytes, use -b option to extract) Instance ID : uuid:ad29eaaa-9222-1843-b140-0559e4a2573f Document ID : xmp.did:FB7F117407206811822AA8F26366DB92 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:cb30d465-2ab8-a043-931c-8f85d816775a Derived From Document ID : xmp.did:F77F117407206811822AA8F26366DB92 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved, saved, saved History Instance ID : xmp.iid:9cd66f29-15f4-4bbb-b71a-2bce57c7a695, xmp.iid:59e01b2f-8f3b-4ee4-9abb-494b33fc5d5b, xmp.iid:F77F117407206811822AA8F26366DB92, xmp.iid:FB7F117407206811822AA8F26366DB92 History When : 2014:09:18 19:08:05+04:00, 2014:10:15 14:16:49+08:00, 2014:12:24 08:50:09+08:00, 2014:12:24 18:15:36+08:00 History Software Agent : Adobe Illustrator CC (Macintosh), Adobe Illustrator CC (Macintosh), Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /, /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : /Users/j/Desktop/need your help/Comigo + Logos433.jpg, /Users/j/Desktop/need your help/Comigo + Logos433.jpg, /Users/dariavaidya/Documents/Comigo/Chitram/RCM.eps, /Users/j/Desktop/need your help/Comigo + Logos433.jpg, /Users/j/Desktop/need your help/Comigo + Logos433.jpg Startup Profile : Print Type : Document Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 239.998443 Max Page Size H : 165.001298 Max Page Size Unit : Millimeters Font Name : DINAlternate-Bold, Calibri, MyriadPro-Regular, DINAlternate-Medium, DIN-Light, DIN-Black, DIN-Medium, DINAlternate-Light, DIN-Bold Font Family : DIN Alternate, Calibri, Myriad Pro, DINAlternate Medium, DIN Light, DIN Black, DIN Medium, DINAlternate Light, DIN Bold Font Face : Bold, Regular, Regular, Medium, Light, Black, Medium, Light, Bold Font Type : TrueType, Open Type, Open Type, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown Font Version : 9.0d3e1, Version 5.62, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895 Font Composite : False, False, False, False, False, False, False, False, False Font File Name : DIN Alternate Bold.ttf, Calibri.ttf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants L : 76.078400 Swatch Groups Colorants A : 0 Swatch Groups Colorants B : 0 Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000004 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.90 Page Count : 9 Creator : Adobe Illustrator(R) 15.0 For : j, Bounding Box : -1 -1444 3442 0 Container Version : 11 Creator Version : 15EXIF Metadata provided by EXIF.tools