CommScope Technologies 800002 Part 24 Base Station User Manual FrameMaker s

Download:
Mirror Download [FCC.gov]
Document ID	267500
Application ID	tmPyr1kansChfhEkfVRTiw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.5kB (318732 bits)
Date Submitted	2002-09-03 00:00:00
Date Available	2002-09-01 00:00:00
Creation Date	2001-05-09 10:31:36
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2002-08-07 11:21:48
Document Title	FrameMaker Templates
Document Creator	FrameMaker 6.0
Document Author:	Airvana, Inc.

Chapter 3
DR
AF
Before you install
About this chapter
This chapter explains steps to take before installation and contains these sections:
• Site planning and construction on page 51
• Planning the network on page 51
• Receiving all shipping and materials on page 52
• Electro static discharge and GR-1089 compliance on page 52
• Safety Recommendations and Warnings on page 52
Site planning and construction
Before installation, the site planner or installation manager must read the IP-RN 8000 Site Planning
Guide. This guide explains all site requirements that must be met for a successful installation.
These requirements include the following:
•
•
•
•
•
•
•
•
Site construction, including the concrete pad or equivalent pad or floor that meets loading
requirements
Power supply
Grounding infrastructure
Backhaul link(s)
Power and backhaul conduits
Antenna configuration
Global Positioning System (GPS) antenna(s)
Primary external lightening/surge protection equipment
Planning the network
The network has to be planned. Network planning includes radio network planning, backhaul
infrastructure planning, and IP address/network planning.
Airvana Confidential & Proprietary
51
Chapter 3
●
Before you install
Receiving all shipping and materials
All expected crates and packages associated with the installation must be received at the installation site.
• All shipping containers must be present and accounted for.
• All shipping containers must be undamaged
DR
AF
Electro static discharge and GR-1089 compliance
The IP-RN 8000 complies with GR-1089 System Level Electrostatic Discharge with the door closed.
When the front door is open, an electro static discharge wrist strap must be worn and connected to the ESD
jack on the Antenna Interface Unit prevent potential service disruption.
CAUTION
Wear an ESD strap (
) and connect the strap to the ESD jack in the
Antenna Interface Unit whenever the front door is open. See Understanding the
Antenna Interface Unit module on page 21.
Safety Recommendations and Warnings
The guidelines that follow help to ensure your safety and to protect the IP-RN 8000. These guidelines may
not address all potentially hazardous situations in your working environment, so be alert, and exercise good
judgement at all times.
•
•
•
•
•
•
Keep the chassis area clear and dust-free before, during, and after installation.
Keep tools away from walk areas where people could fall over them.
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which may become caught in
the chassis.
Wear safety glasses if you are working under any conditions that may be hazardous to your eyes.
Do not perform any actions that create a potential hazard to people or make the equipment unsafe.
Never attempt to lift an object that is too heavy for one person to handle.
Radiofrequency radiation exposure limits
Upon installation, this product is required to comply with the requirements of Federal Communications
Commission 47CFR 1.1310, Radiofrequency radiation exposure limits. Care must be taken by the installer
to insure that the antenna chosen along with its installation position and orientation does not violate these
limits.
52
Airvana Confidential & Proprietary, 910011: June 28, 2002
Safety Recommendations and Warnings
Maintaining Safety With Electricity
Before working on a chassis or working near power supplies, unplug the power cords on an AC-powered
system. On a DC-powered system, disconnect the power at the circuit breakers. Follow these guidelines
when working on equipment powered by electricity:
•
•
•
•
•
Locate the emergency power-off switch for the area in which you are working. If an electrical accident
occurs, you can quickly turn off the power.
Do not work alone if potentially hazardous conditions exist anywhere in your work space.
Never assume that power is disconnected from a circuit: always check the circuit.
Carefully look for possible hazards in your work area, such as moist floors, ungrounded power
extension cords, or missing safety grounds.
If an electrical accident occurs:
• Use caution. Do not let yourself become a victim.
• Disconnect power from the system.
• If possible, send another person to get medical aid. Otherwise, assess the condition of the victim
then call for help.
Install the IP-RN 8000 following local, national, or international electrical codes:
•
•
•
United States — National Fire Protection Association (NFPA70), United States National Electrical
Code.
Canada — Canadian Electrical Code, Part 1, CSA C22.1.
Other countries — International Electromechanical Commission (IEC) 364, Part 1 through Part 7.
Warning Definition
Warning means danger. You are in a situation that could cause bodily injury or death. Before you work on
any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents.
Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Lightning Activity Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Jewelry Removal Warning
Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces,
and watches). Metal objects will heat up when connected to power and ground and can cause serious burns
or weld the metal object to the terminals.
Power Supply Warning
Do not touch the power supply when the power cord is connected. Line voltages are present within the
power supply even when the power switch is off and the power cord is connected.
IP-RN 8000 I&C Guide
53
Chapter 3
●
Before you install
Power Supply Disconnection Warning
Before working on a chassis or working near power supplies, unplug the power cord on AC units;
disconnect the power at the circuit breaker on DC units.
Power Disconnection Warning
Before working on a system that has an On/Off switch, turn OFF the power and unplug the power cord.
Grounded Equipment Warning
This equipment is intended to be grounded. Ensure that the IP-RN 8000 is connected to earth ground during
normal use.
Installation Warning
Read the installation instructions before you connect the system to its power source.
54
Release 2.0, 910011: June 28, 2002

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 2002:08:07 11:21:48Z
Create Date                     : 2001:05:09 10:31:36Z
Page Count                      : 4
Creation Date                   : 2001:05:09 10:31:36Z
Mod Date                        : 2002:08:07 11:21:48Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : Airvana, Inc.
Metadata Date                   : 2002:08:07 11:21:48Z
Creator                         : Airvana, Inc.
Title                           : FrameMaker Templates
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools