Command Electronics LEVELMATEPRO Bluetooth Enabled Vehicular Level Monitor User Manual Manual Side 1

Command Electronics, LLC Bluetooth Enabled Vehicular Level Monitor Manual Side 1

Contents

Manual Side 1

Thank you for purchasing the LevelMatePRO vehicleleveling system. This product was designed for ease of useand utilizes the best possible components to achieveaccuracy you can count on. LevelMatePRO is proudlymade in the USA.Remove the 4 screws on the top of the cover.Remove the top cover and set aside.Remove the battery from the packaging and install it with the plus (+) sign up as in figure 1.Replace the top cover and reinstall the 4 screws.Go to the appropriate app store and download the app.Dowload the app on all of the devices you plan to use with the LevelMatePro. The LevelMatePRO has a security feature that records theunique serial number to your smartphone or tablet so that when you are inclose proximity to other vehicles with LevelMatePRO installed, your smartphone or tablet will only recognize your LevelMatePRO. So duringthis step you will need to start the app on each phone or tablet so that thethis step you will need to start the app on each phone or tablet so that theserial number for your LevelMatePro will be stored on your devices. Startthe app on the first phone or tablet until the Orientation Select screen(figure 3) is displayed. Do NOT make an installation orientation selectionat this point, but instead simply minimize the app by pressing the homebutton on your phone or tablet or delete the app from the task manager onyour phone or tablet. Repeat this for each smartphone or tablet you wantto set up with your LevelMatePRO.to set up with your LevelMatePRO.Install the LevelMatePROThe LevelMatePRO must be installed on a wall or vertical surface on theinterior of your vehicle. The top cover of the product must face the side,front or rear of the vehicle when installed. The arrows on the product labelshould point up toward the ceiling of the vehicle. Attempt to install theproduct as straight as possible both horizontally and vertically. Therre isno need to install the product perfectly level or perpendicular as theno need to install the product perfectly level or perpendicular as theproduct is designed to compensate for imperfect installation orientation.Using the 2 provided screws, mount the product on the wall or verticalsurface as in figure 2. Level the vehicleLevel the vehicle using your normal leveling method. Take time during thisprocess to insure that the vehicle is perfectly level as your LevelMatePROwill use this position as a reference each time you level the vehicle.Start the app on your smartphone or tablet.Select units and measure your vehicleThe app should now be displaying the Settings screen (figure 4). Firstselect the units of measure, inches or centimeters, by tapping on yourselection at the bottom right of this screen. Next, measure the length andwidth of your vehicle as indicated by the front and side view vehileillustrations on this screen. Enter the length and width measurements inthe appropriate locations on this screen.the appropriate locations on this screen.Set LevelAfter selecting the units of measure and entering the measured length andwidth of your vehicle, tap on the Set Level button at the bottom left of theSettings screen (figure 4). The Set Level button records the actual offsetsof the LevelMatePRO device from true level and uses these offsets for allangle measurement calculations. This functionality allows for an imperfectinstallation of the LevelMatePRO and is the key to accuracy calculation.installation of the LevelMatePRO and is the key to accuracy calculation.If you ever uninstall/reninstall your LevelMatePRO in another vehicle or inanother location in the same vehicle, you will need to repeat this stepafter the unit has been installed.Confirm setup is completeAfter completing the Set Level task above, tap the Back button at the topleft of the Settings screen to go to the Leveling screen (figure 5). Once atthe Leveling screen check to insure that the level indicator dots are greenthere are no up or down arrows displayed and the height requirementdimensions are both displaying 0.00. This will be your indication that theLevelMatePRO has properly recorded the current level position. From thisLevelMatePRO has properly recorded the current level position. From thispoint on, each time you start the app to use the LevelMatePRO the Leveling screen will be displayed instead of the Orientation Select orSettings screen. Anytime you need to return to the Settings screen youcan do so by tapping the gear icon at the top right of the Leveling screen.

Navigation menu