Compal Electronics VC-7C Single Band Dual Mode AMPS/CDMA Cellular Phone User Manual VC 7C Operating Manual rev 0 1

Compal Electronics Inc Single Band Dual Mode AMPS/CDMA Cellular Phone VC 7C Operating Manual rev 0 1

UserManual.wiki >

Compal Electronics >

VC 7C User Manual HTML Version

User Manual

OPERATING MANUAL

(VC-7C)

Revision : 0.1

VACOM WIRELESS, INC

CONTENTS

IMPORTANT SAFETY INFORMATION

GETTING TO KNOW YOUR PHONE

DISPLAY INDICATOR

BATTERY INFORMATION

BASIC FUNCTIONS

1. Turning Your Phone On

2. Making a Call

3. Ending a Call

4. Answering a Call

5. Correcting Dialing Mistakes

6. Storing Phone Numbers

7. Adjusting Earpiece Volume During a Call

8. Adjusting Voice Volume

9. Redialing Last Number, Received # & Missed call

10. Speed Dialing

11. Using Caller ID

12. Etiquette Mode

MENUS

I. Phonebook

1. How to add Phonebook

2. Phonebook Search

3. Call List

4. Group Editing

5. Phonebook Information

II. VOLUME & ALERT

1. Bell Type

2. Ring Type

3. Volume

4. Alert Setting

5. Beep Length

6. Keypad Tone

III. Personal Information Management

1. Alarm

2. Schedule

3. Memo

4. Calculator

5. World Time View

IV. PHONE SETTING MENU

1. Wallpaper

2. Greeting Edit

3. Backlight

4. LCD Contrast

5. Set IP Phone

6. Languages

V. Call Manage

1. Call Forward

- Always

- Busy

- Unreachable

- Disable

2. Call Function

- Auto Answer

- Call Waiting

- Caller ID

3. Call Restrict

- Send

- International

- Answering a call

4. Call Answer

- Anykey Answer

- Folder Open

5. Cal Time

6. SECURITY FUNCTION

1. Phone Lock

2. Changing Password

3. Memory Clear

4. Initialization

5. Privacy Information

6. PIN Control

7. VAS

1. Games

- Black Jack

- Othello

2. UTK

3. Haier Service

MESSAGE SERVICES

I. TEXT MESSAGE SERVICES (SMS)

1. Read Text Messages

2. Sending Text Messages

II. VOICE MAIL SERVICE

III. SMS Setting

1. Delivery ACK

2. MSG Alert

3. Group Edit

4. MSG Save

5. Priority

6. Direct view

IV. Delete Messages

USING MENU During a Call

1. Phone Book Search

2. Mute

3. DTMF Mute

4. Mic Volume

ENTERING LETTERS & NUMBERS

1. Chinese Text Input

B. Text Input by PinYin

C. Text Input by Stroke

2. English Text Input

D. Prediction Text Input

E. ABC/123 Mode

3. Inserting Punctuation Symbols & Special Characters

FCC RF EXPOSURE INFORMATION

IMPORTANT SAFETY INFORMATON

Some of the following information may not apply to your particular product. However, as with

any electronic product, you should observe safety precautions when you use this product.

 Save this manual : it contains important safety information and operating instructions.

 Before using this product, please follow and adhere to all warnings, safety, and operating

instructions located on the product and in this User ’s Manual.

 Do Not expose the product to water or moisture.

 Do Not expose the product to extreme hot or cold temperatures.

 Do Not expose the product to open flames.

 Do Not allow objects to fall on, or liquids to spill on the product.

 Use only Original Accessories. Damage from the use of non-approved accessories will void

your phone warranty.

 Connect the approved charger only to designed power sources as marked on the product.

 To reduce the risk of damage, remove the electrical cord from an outlet by pulling the

charger rather than the cord.

 Make sure the electric cord is located accordingly, so that it will not be subjected to damage.

 To reduce the risk of electric shock, unplug the product from the power source before

attempting any cleaning. Once unplugged, use a soft cloth dampened with water.

 DANGER : Never alter the cord or plug. If the plug does not fit into the outlet, have a

proper outlet installed by a qualified electrician. Improper connection can result electric

shock.

 Do Not attempt to disassemble the product – doing so will void the warranty. This product

does not contain consumer-serviceable components. Service should be performed only by

Authorized Service Centers.

 Do Not remove the antenna. A detached antenna may be a choking hazard for children.

 Do Not allow battery to be placed inside the mouth. Electrolytes could be released and may

be toxic if swallowed.

GETTING TO KNOW YOUR PHONE

Active Folder

: Just open the folder to answer an incoming call, and close the

folder to hang up.

LED Indicator

: Flashes to indicate an incoming call or message. It also lights

up (flashes) when you turn on the phone.

Volume/Scroll Keys

: This keys are used to set volume levels, a etiquette mode and

help you navigate through Menus and the phone book.

Press the volume keys to :

- Go to Etiquette mode to press “” key while flip closed.

- Adjust voice volume during conversation.

- Adjust key tone volume in Standby mode.

- Answer the incoming call.

- Scroll through menu options.

- Scroll through your Internal Phone Book.

Backlit LCD Screen

: The LCD screen contains two areas;

- The top line displays indications about your phone’s

operating mode.

- The lower area displays in-use information such as the

other party’s number of the other party (if available),

Mute, Call Waiting, etc. Your menus also display in the

lower area.

Menu Keys ( / )

: This key performs several useful functions.

- During incoming calls, press it to answer the incoming

call.

- In Standby mode, press it briefly to access Main Menu

and Select Menu.

- When navigating a menu, press it to select the highlighted

selection.

SMS Key ( )

: When in Standby Mode, press this key to access Message

Menu items.

- During incoming calls, press it to answer the incoming

call.

- From Standby Mode, press it briefly to access Message

Services.

Navigation Keys

: This key is similar to the volume key. Press “” key to scroll

“up”, and press “” key to scroll “down”. And use it to scan

menu options. View calendar by pressing the left key. Game

by pressing the right key. UTK function by pressing the

bottom key (“”).

Microphone

: Your typical voice microphone for conversation and you can

also mute the microphone during conversation by pressing

“MENU” “4”.

Accessories Connector

: The location where you connect your charging device.

CLR Key

: This key is used to erase numbers or characters you may have

entered incorrectly, or to return to a previous screen.

- To erase one character from the display screen, briefly

press it once.

- To erase all of them, hold it for one second.

- To back up one menu level, press it once.

- To return to Standby Mode, hold it for one second.

- During a call, press it to control earpiece volume.

END/ Key

: Press this key to disconnect a call or to return to Standby

Mode from any menu. Press and hold this key to turn the

phone On or Off.

SEND Key

: This key performs several useful functions.

- Dial a number and press it to connect.

- Press it once to redial the last outgoing number.

Numeric Keys

: These keys are to dial and to input numbers and characters.

*

: This key performs several useful functions.

- Change bells to vibration

- Use as navigation key.

# 

: This key performs several useful functions.

- Use as instance lock.(Key lock). When you unlock the

key, press “MENU” and “#”. (Refer to page __)

- Use as navigation key.

Antenna

DISPLAY INDICATORS

Display indicators appear across the bottom of your phone’s LCD screen. These display

indicators (or icons) will vary based on your phone’s operating modes.

Signal strength : This icon shows your current signal strength. More lines

indicate more signal strength. Five lines indicate maximum strength, and one

line indicates least strength.

Out of Service Indicator: This icon indicates that your phone cannot find a signal

because you’re outside a service area. When this indicator is displayed, you

cannot make or receive calls. Wait a while for a signal or move into an open

area.

Roaming : This icon indicates you are “roaming” on to other carrier’s service

area. But you must register the roaming service.

Message indicator : This icon indicates you have message(s) waiting.

Press SMS Menu button to see the message menu, or press and hold to be

connected to voicemail.

Etiquette Mode: This icon means that an incoming call will vibrate the phone

instead of ringing it. This feature is good for situations requiring etiquette, where

you don’t want your ringer to disturb anyone. Also it indicates a vibrator on.

Alarm on : This icon means that you set the alarm On.

Battery strength : This icon shows the level of your battery charge. The more

black bars you see the greater the charge. When the battery becomes very low,

an empty box appears and the phone flashes an alert.

BATTERY INFORMATION

Your phone comes with a partially charged, rechargeable Li-ion battery so that you can use the

phone immediately after it is activated.

Installing the Battery.

To attach the battery to your phone :

1. Hold the battery so that metal contacts on the base of the battery line up with the metal

contacts on the base of the phone.

2. Place the battery on the back of the phone with the top of the battery about a quarter of an

inch from the latch.

3. Gently slide the battery toward the top of the phone until it snaps into place.

Charging the Battery.

You can tell whether or not your battery needs to be recharged by checking the upper-right

corner of your phone’s display.

When the battery charge level gets low, the battery sensor will let you know by blinking the

battery icon and making audible warning tone. If the battery level gets too low, the phone will

be turned off automatically. When this happens while you were receiving incoming call or

making outgoing call, the call will be automatically disconnected. Watch the battery strength

icon and make sure your battery is adequately charged to avoid such situation.

Charging with the Travel Charger.

Use traveler ’s charges approved by Compal Electronics only. Using any other unauthorized

accessories may be dangerous and will invalidate the phone warranty if said accessories caused

damage or defected the phone.

To charge the battery using the Travel Charger :

- Plug the power cord of the charger into a wall outlet.

- Insert the connector of the charger at the bottom of the phone

(Note) Be sure that you put the connector of the charger into the phone correctly. Failure

to do so may causes damages to the phone.

A completely discharged standard battery recharges fully in approximately tbd hours. The

extended battery recharges in approximately tbd hours. Leaving your phone turned on during

charging, or charging batteries simultaneously, will increase charging time. Leaving the battery

in the charger once it is fully charged does not harm the battery.

Turning your phone on and off.

When you’re ready to turn your phone on, press and hold “END/ ” until the LED comes on.

When the phone has found a signal, the “ ” icon appears. Once the phone is on, it enters

Standby mode, which is the phone’s idle state. You can make and receive calls now. After the

phone goes to Standby mode, you have to enter the PIN1 password to install your UIM to the

phone. For more information, please refer to “Turning your phone on” on page __.

To turn your phone off, press and hold “END/ ” until the LED comes on, then the display will

go blank. When the phone is turned off, nothing is displayed on the screen.

Note : If “END/ ” is pressed for less than one second, the phone will not turn off. This helps

your phone from being turned off accidentally.

Standby mode.

Standby is the most basic state of your phone. The phone goes into standby mode soon after you

turn it on, or whenever you briefly press “END/ ”. When your phone is in Standby mode, you

will typically see the banner (that’s the message displayed when you turn on your phone). If you

enter a phone number, you can press “SEND” to dial it, or press “STO ()”to save it in the

internal phone book.

Conversation Mode.

You can place and answer calls only when your phone is powered on. During a call, the phone is

in Conversation mode.

BASIC FUNCTIONS

1. Turning Your Phone On

The first time you turn your phone on after UIM installed, your phone asks you to enter the

“PIN1” password that you receive from the carrier with UIM. After you successfully enter the

password, you can use your phone. If you want to UIM “Enabled” or “Disabled” or if you want

to change PIN password, please refer to “VI. SECURITY FUNCTION” on page .

If you fail to enter the correct password 3 times, the phone will be blocked. And you are

required to enter PUK password if available.

2. Making a Call.

To place a call :

Press and hold “END/ ” to power on your phone. If you see indicators on the display that

means the phone is on.

Enter the phone number (up to 32 digits) by pressing the digit keys. The phone number displays

from left to right.

Press “SEND”. The phone places the call to the entered phone number (if service is available).

You can also make calls ;

From your PIM (see “III. Personal Information Management” on page )

By using One-, Two-, or Three-Touch Dialing (see “Speed Dialing” on page ).

3. Ending a Call.

To end a call, close the flip or press “END/ ”. The call time (length of the call) displays, along

with the name and number of the called party (if available). The phone returns to Standby mode

automatically.

4. Answering a Call.

To answer an incoming call, open the folder and press any key. If your phone is registered in

Caller ID, a caller ’s phone number is displayed on the display. If a caller ’s number is stored in

Phone Book, the caller ’s name is displayed.

5. Correcting Dialing Mistakes.

To correct a misdialed digit, press “CLR” to erase one digit at a time. You can erase all the

digits at once by pressing “CLR” and holding it down for at least one second.

6. Storing Phone Numbers

Phone numbers for frequently used services are pre-programmed into your phone. To store a

number,

- After dialing a number, press “STO ()” key. Then you can see an image of the

phone and UIM on the display.

- Select one of them to store or edit.

- Press “EDIT” and enter the name. Press “OK” to finish. Scroll “ / ” to edit the

location number and hone numbers. Once you finish editing, press “OK” to save.

- For more information, see “1. PIM” on page .

7. Adjusting Microphone Volume During a Call

To adjust Microphone volume during a call,

- During a call, press “MENU ()” and “4. Mic Volume”.

- Press “” to increase Mic or press “” to decrease Mic volume.

- Once you hang up a phone, the Mic volume goes back to factory setting level.

8. Adjusting Voice Volume.

You can adjust the earpiece volume during a call using the volume keys on the side of the phone.

Briefly pressing the volume key once displays your earpiece volume. Repeatedly press the

volume key to adjust.

9. Redialing Last Number, Received Number and Missed Call

You can redial up to 20 numbers of the number you dialed, received and missed. If you want to

redial, simply press “SEND”,

- Then you can see up to 20 numbers on logs orderly in timely bases.

- Press “VIEW ()” key to see the time you called and the number.

- Simply press “SEND” key to redial the number you select.

10. Speed Dialing

Once you stored phone numbers in your phone by using Phone Book, you can make a call by

pressing One-, Two- or Three-Touch Dialing.

Press a location number you stored, then your phone automatically connect you to the phone

number you want to call.

Note : There are three phone numbers you can store in one location number, “Home”, “Office”,

“Mobile”. Once you press a location number to call, your phone will connect the number, which

you stored first. For example, if you store a number under “Home”, “Office” and “Mobile”

orderly, your phone will connect to “Home” number.

11. Using Caller ID.

This feature tells you who is calling you by displaying the caller’s number when the phone rings.

If a caller’s name and number are stored in your Phone Book, the corresponding name is also

displayed. If you call someone who has this feature, your phone number will be displayed on

their phone. To see the last call numbers you received, press “SEND”.

12. Etiquette Mode

When you are in quiet situations, such as in a cinema, museum, play, etc where you don’t want

your ringer to disturb anyone, you can set your phone on Etiquette mode. Then an incoming call

will vibrate the phone rather than ring it. To set Etiquette mode, press and hold “*”. If you

want to release Etiquette mode, press the button once again.

MENUS

I. Phone Book

1. How to add Phonebook

To add a phone number in Phonebook, press “MENU” and “1. PB Add”.

- Then you can see an image of the phone and UIM on the display. Select one of them

to store or edit.

- Choose a type of the phone number among the image of a mobile phone, Home,

Office and etc by scrolling “ ”.

- Once you choose a type of the phone number, press “EDIT” and enter the name.

Press “OK” to save the name.

- Scroll “ / ” to edit the location number and the phone number.

- Enter the location and phone number and press “OK” to save.

If you want to add “Group”, “e-mail address”, “memo” or “bell type” for CID incoming rings,

scroll “ ” before you press “OK”.

- “Group” : Scroll “ ” to choose a group type if you added a group. (how to add

Group, refer to “4. Group Editing” below).

- “E-mail” : Press “EDIT” and enter the e-mail address. Press “OK” to finish.

- “Memo” : Press “EDIT” and write a memo. Press “OK” to finish. (how to write a

memo, refer to “ENTERING LETTERS & NUMBERS” on page ___.

- “CID Incoming Ring” : If you are registered CID service and if you want to set a

distinctive ringing when you receive this phone number, scroll “ ” to choose

the incoming bell type.

- Once you finished to set all the information for Phone book, press “OK” to store.

- Then you can see a total number of used and empty locations and a message that the

number you wanted to store was stored successfully. And it goes to stand-by mode.

 Note ) If you want to store the number in UIM, press “Menu” and “1. PB Add” and choose

the image of UIM. Then you can store the phone number in UIM as the same manner as above.

2. Phonebook Search

a. Search by name

You can find a number you stored in Phone Book by entering a name.

- Press “MENU ()”, “2. PB Search” and select “1. Name”.

- Enter the name you want to call.

- If you don’t remember the full name, just enter the first letter of the name. Your phone

will show you all similar names.

- Press “SEND” to dial.

- Or press “VIEW ()” to edit or “DEL” to delete.

b. Search by Number

You can find a number ’s information you stored in Phone Book by entering a phone number.

- Press “MENU ()”, “1. PB Search” and select “2. Number”.

- Enter the number you want to see and press “OK”. Then you will see the name and

location.

- Press “SEND” to dial.

- Or press “VIEW ()” to edit or “DEL” to delete.

- If the number is not stored in the location, a warning tone is sounded and “No Number

Matches” is shown on the display.

c. Search by location

You can find a number you stored in Phone Book by locations.

- Press “MENU ()”, “1. PB Search” and select “3. Speed Key”.

- Enter the location number you want to find and press “OK”.

- Press “SEND” to dial. Press “EDIT ()” to edit. Or press “DEL” to delete.

- If a number is not stored in the location, “Empty Location” is shown on the display.

d. Search by group

You can find a number you stored in Phone Book.

- Press “MENU ()”, “1. PB Search” and select “4. Group”. Then you can see “Choose

Group” on the display.

- Scroll “” or “” to select “BUSINESS”, “FRIENDS”, “FAMILY” or “ETC”.

- Once you select “BUSINESS”, “FRIEND”, “FAMILY” or “ETC”, you can see the

numbers you stored and defined only as “BUSINESS”, “FRIEND”, “FAMILY” or

“ETC”.

- Place the cursor on the number you want to dial by scrolling “” and “” and press

“SEND” to dial.

- Press “SEND” to dial. Press “EDIT ()” to edit. Or press “DEL” to delete.

e. Phonebook List Search

- Press “MENU ()”, “1. PB Search” and select “5. PB List”.

- Then your phone will show you all numbers you stored in your phone orderly.

- Choose the number and press “SEND” to dial.

- Press “SEND” to dial. Press “EDIT ()” to edit. Or press “DEL” to delete.

f. UIM List Search

- Press “MENU ()”, “1. PB Search” and select “6. UIM List”.

- Then your phone will show you all numbers you stored in RUIM orderly.

- Choose the number and press “SEND” to dial.

- Press “SEND” to dial. Press “EDIT ()” to edit. Or press “DEL” to delete.

3. Call List

You can see the outgoing call list including call numbers, time and duration. To see the call list;

- Press “Menu ()” and “3. Call List”.

- Then you can see all the outgoing lists you have called.

4. Group Editing

If you want to add more kind of group, press “Menu ()” and “4. Group Edit ”.

- Press “ADD” and enter the name of group.

- Press “OK” to save.

- If you want to edit, press “EDIT”.

5. Phonebook Information

You can check how many location stored in your phone and UIM.

- Press “Memu ()” and “5. PB Info”.

- Then you will see the number of location stored in UIM and your phone.

II. VOLUME & ALERT

1. Bell Type

This option enables you to set a ring type for incoming calls in bells and 40 poly MIDI melodies.

a. Bell Select

- Press “Menu ()”, “” to fine “2. Vol/Alert” and choose “1. Bell Select” and “1.

Bell”

- Scroll “” and “” to select bell types. While you scroll, you can hear bells and

melodies.

- Press “OK ()” to set.

b. MIDI Melody Select

- Press “Menu ()”, “” to fine “2. Vol/Alert” and choose “1. Bell Select” and “1.

Bell”

- Press “Menu ()”, “”, “2. Vol/Alert”, “1. Bell Select” and “2. MIDI”

- Scroll “” and “” to select MIDI melodies. While you scroll, you can hear melodies.

- Press “OK ()” to set.

2. Ring Type

You can set incoming rings in 7 different types.

- Press “Menu ()”, “” to fine “2. Vol/Alert” and choose “2. Ring Type”.

- Select “Bell”, “Vibration”, “Lamp” or “Bell + Vib”.

- Press “OK ()” to set.

3. Volume

a. Bell Volume

Ring Volume option allows you to set the level of the ring volume.

- Press “Menu ()”, “” to fine “2. Vol/Alert” and choose “3. Volume” and “1. Bell

Volume”.

- Scroll “” and “” to increase or decrease the volume level.

- Press “SEL ()” to set.

b. Key Volume

Key Volume option allows you to set the level of the key volume.

- Press “Menu ()”, “” to fine “2. Vol/Alert” and choose “3. Volume” and “2. Key

Volume”.

- Scroll “” and “” to increase or decrease the volume level.

- Press “SEL ()” to set.

c. Call Volume

Call Volume option allows you to set the level of the earpiece volume.

- Press “Menu ()”, “” to fine “2. Vol/Alert” and choose “3. Volume” and “3. Call

Volume”.

- Scroll “” and “” to increase or decrease the volume level.

- Press “OK ()” to set.

4. Alert Setting

a. Connect Beep

“Connect Beep” option allows you to hear a torn when a call is connected.

- Press “Menu ()”, “” to fine “2. Vol/Alert” and choose “4. Alert Setting” and “1.

Connection”.

- Select “On” or “Off” and press “OK ()” to set.

b. Call Drop

“Call Drop” option allows you to hear a warning torn when a call is disconnected

occasionally or when the caller hangs up the phone.

- Press “Menu ()”, “” to fine “2. Vol/Alert” and choose “4. Alert Setting” and “2.

Drop”.

- Select “On” or “Off” and press “OK ()” to set.

c. 1 Minute Alert

“1 Minute Alert” option allows you to hear a torn every 1 minute while you are calling.

- Press “Menu ()”, “” to fine “2. Vol/Alert” and choose “4. Alert Setting” and “3.

Minute”.

- Select “On” or “Off” and press “OK ()” to set.

d. Service

“Service” option allows you to hear a torn when you move to other base stations during

a call.

- Press “Menu ()”, “” to fine “2. Vol/Alert” and choose “4. Alert Setting” and “4.

Service”.

- Select “On” or “Off” and press “OK ()” to set.

5. Beep Length

You can set DTMF tone length as Normal or Long.

- Press “Menu ()”, “” to fine “2. Vol/Alert” and choose “5. Beep Length”.

- Set the beep length “Normal” or “Long” and press “OK ()” to set.

6. Keypad Tone

You can set the keypad sound a number you press or a normal beep. To set the keypad tone;

- Press “Menu ()”, “” to fine “2. Vol/Alert” and choose “6. Keypad Tone”.

- Choose “Keytone” or “Voice” and press “OK ()” to set.

III. Personal Information Management

Your phone support you various additional functions, such as “Alarm”, “Schedule”, “Memo”,

“Calendar” and “World Time”.

1. Alarm

You can set the 24-hour alarm to sound an alert at the set time, when your phone is on. If the

phone is off at the alarm set time, the alarm will not sound. To set the alarm, press “Menu ()”,

“” to fine “3. PIM” and choose “1. Alarm”.

- Choose “Alarm 1” or “Alarm 2” and press “SEL”.

- Enter the time and choose AM or PM by pressing “”.

- Press “” to choose Bell type and select the bell type by scrolling “”.

- Press “” to choose the alarm type as “Disable”, “everyday”, “Mon~Sat”, “Mon~Fri”

and “Once Alarm” and select the alarm type by scrolling “”.

- Once you finish to set the alarm, press “SEL” to set.

Note 1) you can set up to 2 different alarms.

Note 2)

- Disable : Once you set “disable”, the alarm will not work although you set the time.

- Everyday : Once you choose “everyday”, your phone will sound an alert at the set time.

- Mon-Sat : Once you choose “Mon-Sat”, your phone will sound an alert from Monday

to Saturday.

- Mon-Fri : Once you choose “Mon-Fri”, your phone will sound an alert from Monday to

Friday.

- Once : Once you choose “Once” option, your phone will sound an alert at the set time

once.

2. Schedule

Schedule Manager option supports you to manage your schedule with your phone. To set or edit

a schedule, press “Menu ()”, “” to fine “3. PIM” and choose “2. Schedule”.

a. Add Schedule :

- Select “1. Add Schedule”. Then you can see the calendar of this month on the display.

- Scroll “” and “” to choose the date and press “OK ()”. Or you can move the

month by scrolling the side keys on left side of the phone (volume keys).

- Press “” and enter the time (hour, minute and AM/PM).

- Press “” and enter a memo under “Input Schedule”.

- Press “” and choose the bell type by scrolling “”.

- Press “OK ()” to save.

- Then the display shows you an animation and “Add Other Schedule?” orderly. If you

want to add more, press “OK ()”. Or if you want to finish, press “QUIT ()” or

“END”.

b. Schedule List : You can see the schedule list you stored.

- Select “2. List”. Then you can see the schedule list orderly.

- And you can edit the schedule by scrolling “” and “” and pressing “SEL”. Then

you can edit a schedule as the same way as “Add Schedule” above.

- Or you can delete a schedule by simply pressing “DEL”. Once you press “DEL ()”,

you can hear a warning tone and the display shows you “Erase ?”. Press “OK ()” to

erase.

c. Schedule Delete : You can delete all schedules.

- Select “3. Delete”.

- Then your phone will ask you “All Schedule Erase?”.

- Press “OK ()” to erase.

3. Memo

Memo option supports you to manage your daily jobs to do with your phone. To set or edit

Memo, press “Menu ()”, “” to fine “3. PIM” and choose “3. Memo”.

a. Add Memo :

- Choose “1. Add” and press any numeric keys to enter a memo.

- Input or edit your jobs to do and press “OK” twice to save.

b. Memo List :

- Choose “2. List”. Then your phone will show you all memo list that you stored.

- Select by scrolling “” and “” and press “SEL ()”.

- Then you will see the memo and time you stored.

- If you want to edit, press “EDIT ()”.

c. Delete :

- Select “3. Delete”. Then you will see “All Memo Erase?”.

- Press “SEL ()” to delete all memos.

- Or if you want to delete Memo selectively, choose Memo lists that you want to delete.

- And press “Delete ()”.

4. Calculator

You can use your phone as a calculator. Press “Menu ()”, “” to fine “3. PIM” and choose “4

Calculator”.

5. World Time View

Your phone shows you world 77 cities’ current time. To access the world time view;

- Press “Menu ()”, “” to fine “3. PIM” and choose “5. World Time”.

- Use “” or “*” and “#” keys to find cities.

IV. PHONE SETTING MENU

1. Wallpaper

You can have the phone display various welcome greeting on stand-by mode. To edit the

greeting for the main LCD on stand-by mode:

- Press “Menu ()”, “” to fine “4. Phone Setting” and “1. Wallpaper”.

- Scroll “” to choose a wallpaper and press “OK” to save.

2. Greeting Edit

If you want to edit the banner;

- Press “Menu ()”, “” to fine “4. Phone Setting” and “2. Greeting”.

- Press “1. Banner Select” and choose “Provider” or “User”. If you choose “Provider”,

the phone will show the banner from UIM.

- If you choose “User”, the banner will be shown from the phone.

If you choose “User” and want to edit, choose “2. Text Edit” and enter the banner you want to

show. And press “OK” to save.

3. Backlight

You can set backlighting of LCD display to stay on continuously or automatically turn off in 10,

20 and 30 seconds.

- Press “Menu ()”, “” to fine “4. Phone Setting” and choose “3. Back light.

- Select “ON”, “10 Sec”, “20 Sec” or “30 Sec”.

- Press “OK ()” to set.

4. LCD Contrast

You can adjust LCD contrast.

- Press “Menu ()”, “” to fine “4. Phone Setting” and choose “4. Contrast”.

- Scroll “” and “” to chose 10 steps of LCD contrast and press “OK ()” to set.

5. Set IP Phone

You can see or edit IP Phone.

- Press “Menu ()”, “” to fine “4. Phone Setting” and choose “5. Set IP Phone”. Then

you can see IP Call.

- If you want to edit, press “EDIT ()” and enter the new number.

- Press “OK ()” to save.

6. Languages

You can choose between two different languages (Chinese & English) for text shown in the

display. To change languages,

- Press “Menu ()”, “” to fine “4. Phone Setting” and choose “5. Language Set”.

- Select “Chinese” or “English”.

- Press “OK ()” to set.

V. Call Function

1. Call Forward

a. Always

- Press “Menu ()”, “” to fine “4. Phone Setting” and choose “1. Call Forward” and

“1. Always”.

- Choose “Enable” or “Disable” and press “OK” to save.

b. Busy

- Press “Menu ()”, “” to fine “4. Phone Setting” and choose “1. Call Forward” and

“2. Busy”.

- Choose “Enable” or “Disable” and press “OK” to save.

c. Unreachable

- Press “Menu ()”, “” to fine “4. Phone Setting” and choose “1. Call Forward” and

“3. Unreachable”.

- Choose “Enable” or “Disable” and press “OK” to save.

d. Disable

- Press “Menu ()”, “” to fine “4. Phone Setting” and choose “1. Call Forward” and

“4. Disable”.

- Choose “Enable” or “Disable” and press “OK” to save.

2. Call Function

a. Auto Answer

- Press “Menu ()”, “” to fine “4. Phone Setting” and choose “2. Call Function” and

“1. Auto Answer”.

- Choose “On”, “Off” or “Earphone” and press “OK” to save.

b. Call Waiting

- Press “Menu ()”, “” to fine “4. Phone Setting” and choose “2. Call Function” and

“2. Call Waiting”.