Compass Systems GB732 Bluetooth GPS Receiver User Manual
Compass Systems Corp. Bluetooth GPS Receiver Users Manual
user manual
Navibe GB732 GB233
Navibe GB732 GB233
Bluetooth Receiver User manual
Compass Systems Corp.
Tel: +886-2-8751-8598 Fax: +886-2-8797-3898
Email: service@cpss.com.tw Web: www.navibe.com
No part of this User’s Manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying recording ,for any purpose other than the
purchaser’s personal use, without the written permission of Compass Systems Corp.
Information in this User’s Manual is subject to change without notice. Compass Systems
Corp. reserves the right to change or improve or modify its products and to make changes to
the content without obligation to notify any person or organization of such changes.
©Copy right 2006 by Compass Systems Corp. All rights reserved.
Printed in Taiwan, Version 1.0
Introduction
i
Introduction
WARNINGS
Some certain knowledge is required to be well known by the user for proper and safe use
of Navibe Bluetooth GPS receiver. Please read this User’s Manual first before operation.
Because Navibe Bluetooth GPS receiver is an assistant device, it will NOT undertake any
legal responsibility for any accident or damage caused by the user’s wrong operation
and/or wrong judgement in navigating with Navibe.
WARNINGS
Some certain knowledge is required to be well known by the user for proper and safe use
of Navibe Bluetooth GPS receiver. Please read this User’s Manual first before operation.
Because Navibe Bluetooth GPS receiver is an assistant device, it will NOT undertake any
legal responsibility for any accident or damage caused by the user’s wrong operation
and/or wrong judgement in navigating with Navibe.
ii
Introduction
CAUTION
The Global Positioning System(GPS) is a system of 24 satellites which circle the earth
twice a day in a very precise orbit and transmit information to earth. The Navibe unit
must continuously find at least three of these satellites to calculate your position and
your movement.
This GPS system is operated by the government of the United States, which is solely
responsible for its accuracy and maintenance. Any changes of the system could affect
the accuracy and performance of all GPS equipment.
PLEASE CHARGE BATTERY FULLY BEFORE INITIAL USE.
(When fully charged, red color-LED2 will automatically switch off.)
CAUTION
The Global Positioning System(GPS) is a system of 24 satellites which circle the earth
twice a day in a very precise orbit and transmit information to earth. The Navibe unit
must continuously find at least three of these satellites to calculate your position and
your movement.
This GPS system is operated by the government of the United States, which is solely
responsible for its accuracy and maintenance. Any changes of the system could affect
the accuracy and performance of all GPS equipment.
PLEASE CHARGE BATTERY FULLY BEFORE INITIAL USE.
PLEASE CHARGE BATTERY FULLY BEFORE INITIAL USE.
(When fully charged, red co
(When fully charged, red color
lor-
-LED2 will automatically switch off.)
LED2 will automatically switch off.)
iii
Introduction
Thank you for choosing
Thank you for choosing Navibe Bluetooth GPS Receiver
Navibe Bluetooth GPS Receiver!
!
Take it now
Take it now ------
------it can be your best friend!
it can be your best friend!
Application Conditions:
Navibe is designed for outdoors navigation in the temperature range of -20°C~ 70°C.
Introduction section gives you a general overview of Navibe features.
Reference section tells how to operate the unit correctly and how to connect this unit to
your pocket PC step-by-step.
If you find something missing or damaged with the reference to the standard package,
please contact the local dealer or retailer.
iv
Introduction
Chapter I Introduction
Section 1 Announcement i
Section 2 Warnings ii
Section 3 Caution iii
Section 4 Welcome to Navibe iv
Section 5 Table of Contents v
Chapter II Reference
Section 1 Hardware Description 1
Section 2 State Table of LED 2-5
Section 3 Packet PC Setup 6-9
v
Reference
1
Hardware Description
Hardware Description
DC
Charging
Jack
Battery
Cover
GPS External
Antenna Connector
(MMCX type)
Power
Switch
Low Power (red) &
Battery Charging
(Yellow) –LED2
GPS
(Green –LED1)
Bluetooth
(Blue –LED3)
Reference
The Bluetooth GPS has three LED indicators. The first is GPS status LED
indicator that is named LED1. The second is Low Power and Charging LED which is
named LED 2. The third is Bluetooth status LED that is named LED 3. The status table
of LED shows as follows:
State Table of LED
State Table of LED
LED 1 : Right (Green)
GPS LED Description
Color and Action GPS Position Fixed
Green ON Yes
Green Flashing No
2
Reference
LED 2: Middle (Red & Yellow)
LED 3: Left (Blue)
Low Power & Battery
Charging LED Description
Color and Action Battery Charged Low Power
Red ON N/A Yes
Yellow ON Charging N/A
Yellow OFF Yes No
Bluetooth LED Description
Color and Action Bluetooth Connection
Blue Flashing Pairing
Blue ON Connected
3
Reference
Turn on To turn on the receiver, first, make sure that the battery is loaded securely
then push the power switch to “ON” position. The green LED (LED 1) indicator will be
flashing for searching GPS satellites. The blue LED (LED 3) indicator will start flashing
for searching Bluetooth device.
Turn off To turn off the receiver, push the power switch to “OFF” position. All of
the LED indicators will turn off.
Low Power & Charging The second LED (LED 2) indicator will turn RED when
battery power becomes low. Connect the receiver to a power source to recharge the
battery. When the battery is being charging, LED2 will turn YELLOW. When fully
charged, the YELLOW indicator will switch OFF. Please charge the battery fully before
first use.
4
Reference
Bluetooth Device
The right LED (LED 3) blue indicator will flash for pairing
Bluetooth signals. When connected, the LED blue indicator (LED3) will
become to steady on.
GPS Status
The first LED (LED 1) green indicator will be flashing when
searching satellites. When fixed, the LED green indicator (LED1) will
become to steady on.
5
Reference
Pocket PC Setup
Pocket PC Setup
Pocket PC Setup
Note
Note: In
: In “
“Bluetooth: Device Pairing
Bluetooth: Device Pairing”
”window you will required to enter
window you will required to enter
the Passkey number
the Passkey number 0000
0000 when opening the port in your GPS program.
when opening the port in your GPS program.
2.Tap New > Connect
1. Tap “Bluetooth Manager” from Start Menu
6
Reference
3. Tap Explore a Bluetooth device, then tap Next 4. Tap where indicated to choose a device.
And select the ID “BT GPS V10” or “BT GPS V20”
to continue.
7
Reference
5. The PDA will begin retrieving services
as shown above 6. Select “SPP Slave” and tap Next
8
Reference
7. Tap Finish to establish the BT
GPS V.. Bluetooth GPS connection
8. In the future, you may establish the
connection from the shortcut, “BT GPS V10:
SPP Slave” or “BT GPS V20: SPP Slave”
9
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the
equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users
must follow the specific operating instructions for satisfying RF exposure compliance.
Compass Systems Corp. Tel: +886-2-8751-8598 Fax: +886-2-8797-3898 Email: service@cpss.com.tw Web: www.navibe.com
©Copy right 2006 by Compass Systems Corp. All rights reserved. Printed in Taiwan