Compoka Electronic Technology KBJ-108N Bluetooth headset User Manual
Shenzhen Compoka Electronic Technology Co., Ltd Bluetooth headset
User Manual
Bluetooth 4.0 Sports Headset KBJ-108N User's Manual Thank you for selecting our latest Bluetooth headset, please read this User's Manual carefully before you operate this headset, and please save this Manual for further reference. Before operating, please read all the Safety notice to make sure the safe and appropriate use. It will damage your hearing if you listen with high volume for a long time. It is recommended that only use the lowest volume which is necessary for speaking and listening to music. 1. Guide Ĺś Headset introduction Safety Notice: Please observe the rules of the Country or Region which you are in while driving. Do not disassemble or modify the headset at any reason, otherwise, It may damage or burn the headset. If there is any quality problem, please send the headset to authorized service center for repairing. Please keep the equipment along with all the accessories out of the reach of children and pets. It will cause suffocation and serious injury. Do not put the device under the environment which the temperature is too low or too high ( Below 0Ĺ or over 45Ĺ). Extreme temperatures will cause the device deformation, reduce the charging capacity and shorten the working life. Please do not wet the device, for the liquid can cause serious damage to the device. Please do not touch the device by wet hands. It is out of the maintenance range for the damage caused by water. Please avoid closing to the eyes of children and pets when using the flash indicator of the device. Please do not operate the device in thunderstorm weather. 01 3. How to connect with two Bluetooth mobile Ĺ!Contents: Bluetooth Headset, USB Charging Cable, User's Manual (1) Turn on the bluetooth function of mobile phone 1. (2) Press the â â for 4 seconds of the bluetooth headset, switch on and enter into pairing mode, blue and red indicators take turns to flash, make connection with phone 1. (3) press the â â again for 2.5 seconds, the red and blue indicators take turns to flash and searching connections automatically; meanwhile, phone 1 is disconnected. (4) Turn on the bluetooth function of the mobile phone 2 and VHDUFK.%-1IURPWKHOLVWPDNHFRQQHFWLRQ ,QSXWWKH password 0000 if needed and the connection will be made). (5) Turn off the bluetooth headset and return on, the headset will connect with both mobile phones automatically. The voice âBluetooth is connected, bluetooth is connectedâ will appear in English. phones: 2.Instruction Ĺś.H\)XQFWLRQ LED indicator Power switch / Pairing / Play / Pause / Receive / Hang up phone call Re-dial the last phone No USB charger port Previous song Volume increase Next song Volume decrease 02 USB Charging Cable: Power switch Switch on: Press 2 seconds to switch on, the blue indicator will be in(voice prompts in English). Press 2.5 seconds, it enters into pairing mode, the red and blue indicators take turns to flash.(voice prompts in English); power will switch off automatically after 5 minutes no devices to connect . Switch off: Press 5 seconds to switch off, the red indicator flashes one time mean the device is switched off (voice prompts in Englishďź Receive Hang up phone call Press âfunction keyâ to receive phone call, press it again to end the phone call. Press the key by twice continuously to re-dial the last phone number. Press the key for 2 seconds to reject the phone call. Play/Pause In music mode, press it 1 time to pause, and press it again to play. (when phone call comes, the music will be off. When phone call is off, the music will continue. âť When the headset is connected with two mobile phones, some functions of the mobile phones cannot work normally. In Music Mode, press it to play previous song. Previous song Volume Increase Long press to increase volume all the time. Ĺś Battery power of bluetooth headset displayed In Music Mode, press it to play next song. Next Song Volume Decrease Long press to decrease volume all the time. âť After connected with Iphone, the battery power of the headset will be displayed on the phone. 03 on Iphone 04 5.Headset Charging 10:30 90% 90% KBJ-108N 4.Bluetooth Indicator Status Work Status Switch on Indicator Light Status Blue indicator flash 2 times Remark Voice Prompts Red indicator flash 1 time Voice Prompts Pairing Mode Red and blue indicators take turns to flash Voice Prompts Connection Blue indicator will flash 1 time every 6 seconds Voice Prompts Phone call Blue indicator will flash 1 time every 6 seconds Switch off Play Music Blue indicator will flash 1 time every 6 seconds Battery low warning Red indicator will flash every 60 second Charging Red indicator is on all the time when charging; Blue indicator is on instead when charged full 05 This headset is equipped with built-in non-detachable and rechargeable battery. Please make sure that the battery is charged full for the first time use. Ĺś&RQQHFWWKHFKDUJHUWRWKHFKDUJLQJSRUW Ĺś,QVHUWWKHFKDUJHULQWRWKHVWDQGDUGSRZHURXWOHW During the charging, indicator will turn to Red. If without charging, please plug out the travel charger first, then connect it again. Ĺś$IWHUIXOOFKDUJLQJUHGLQGLFDWRUZLOOEHRII3OHDVHSOXJRXW the travel charger from the power outlet and headset. Ĺś,WZLOOUHGXFHWKHEDWWHU\SHUIRUPDQFHDIWHUORQJWLPH repeatable charge and dis-charge. Ĺś$QGLWLVQRUPDOSKHQRPHQRQIRUDOOWKHUHFKDUJHDEOHEDWWHU\ Please do not dial or receive phone call during charging, and please plug out the charger from the headset, then receive the phone call. When the battery is low, the headset will appear the prompt and the red indicator will flash. âť If the headset turned off due to power failure during phone calls, the call will switch to mobile phone automatically. Voice Prompts 06 - Charging Voltage: DC 5V - Work Voltage: 3.7V )UHTXHQF\5HVSRQVH+]a.+] âť The actual time may vary from mobile phone types and functions. Bluetooth 4.0 Sports Headset 6.Project Specification and Instruction - Bluetooth Version : V4.0 - Supported devices: Bluetooth mobile phones, Bluetooth speakers Bluetooth PC and other Bluetooth devices 0D[LPXPZRUNUDQJH)HHW 0HWHUV 6WDQGE\WLPH+RXUV - Talk time: 4 Hours - Music play: 3 Hours - Charging time: 1.5 Hours 07 08 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Startup Profile : Print Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2015:11:16 14:47:27+08:00 Modify Date : 2015:11:16 14:47:27+08:00 Metadata Date : 2015:11:16 14:47:24+08:00 Creator Tool : PScript5.dll Version 5.2 Thumbnail Width : 256 Thumbnail Height : 156 Thumbnail Format : JPEG Thumbnail Image : (Binary data 16035 bytes, use -b option to extract) Document ID : uuid:06A6BCE42D8CE511AD9C9055CD65DF89 Instance ID : uuid:bc66d0e3-0f28-4a9e-b8af-18851f35b038 Derived From Instance ID : uuid:ac639cb2-bd5a-48d3-a17d-fd5d44101cad Derived From Document ID : xmp.did:E25F42D30D30E511A687C31B04FCEDCC Derived From Rendition Class : proof:pdf Has Visible Overprint : True Has Visible Transparency : False N Pages : 1 Max Page Size W : 330.205857 Max Page Size H : 91.999897 Max Page Size Unit : Millimeters Font Name : Arial-BoldMT, ArialMT, MyriadPro-Semibold, MyriadPro-Regular, Tahoma, HYe2gj, AdobeSongStd-Light Font Family : Arial, Arial, Myriad Pro, Myriad Pro, Tahoma, 汉仪细中圆简, Adobe 宋体 Std Font Face : Bold, Regular, Semibold, Regular, Regular, regular, L Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, TrueType, Open Type Font Version : Version 3.00, Version 3.00, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 3.15, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895 Font Composite : False, False, False, False, False, False, False Font File Name : ARIALBD.TTF, ARIAL.TTF, MyriadPro-Semibold.otf, MyriadPro-Regular.otf, TAHOMA.TTF, 汉仪细中圆简.ttf, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : 鲜艳 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Format : application/postscript Title : KBJ-108N_鑻辨枃璇存槑涔 Creator : Administrator Page Count : 3 Author : AdministratorEXIF Metadata provided by EXIF.tools