Compoka Electronic Technology KBJ-266N Bluetooth headphone User Manual

Shenzhen Compoka Electronic Technology Co., Ltd Bluetooth headphone Users Manual

Users Manual

Bluetooth headphoneKBJ-266NFCC ID: 2AA7XKBJ-266NNOTE: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to part 15 of the FCCRules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. Thisequipment generates uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, thereis no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radioor television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for helpChanges or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operatethe equipment. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, includinginterference that may cause undesired operation.Thank you for selecting our latest Bluetooth headphone,please read this User's Manual carefully before you operate thisheadphone, and please keep this manual for further reference.Before operating, please read all the safety notice to make suresafe and appropriate use.Safety Notice:Please observe the rules of the country or region which youare in while driving.Do not disassemble or modify the headphone for any reason,otherwise, It may damage or burn the headphone.If there is any quality problem, please send the headphone toauthorized service center for repairing.Please keep the equipment along with all the accessories outof the reach of children and pets. Otherwise, it may causesuffocation and serious injury.Do not put the device under the environment which thetemperature is too low or too high ( Below 0℃or over 45℃).Extreme temperatures will cause the device deformation,reduce the charging capacity and shorten the working life.Please do not wet the device, for the liquid can cause seriousdamage to the device. Please do not touch the device by wethands. It is out of the maintenance range for the damagecaused by water.Please avoid closing to the eyes of children and pets whenusing the flash indicator of the device.Please do not operate the device in thunderstorm weather.It will damage your hearing if you listen at highvolume for a long time. It is recommended thatonly use the lowest volume which is necessaryfor speaking and listening to music.1. Guide■Heaphone introductionSoft andcomfortableheadbandPrevious SongVolume DecreasePower switchPairingPlay/PauseFoldableReceive/Soft andHang up phone callcomfortableNext Songear padVolume IncreaseD3.5mmMicrophonePlug portChargingPort※Contents: Bluetooth headphone, USB charging cable,3.5mm audio cable, user’s manualUSB Charging Cable:3.5mm Audio Cable:2.InstructionSwitch on : Long press “ ” for 2 seconds to switchon , the blue indicator will be on for 1 second(It willappear voice prompt in English). Long press “ ” for“ ”2 seconds again to enter into pairing mode,Power switchmeanwhile the red and blue indicators take turns toPairingflash. It will power off automatically when no deviceto be connected in 10 minutes ) .Switch off : Long press “ ” for 4 seconds to switch off ,meanwhile the red indicator will be on for 1 second.“ ”Briefly press “ ” to receive phone call, press it againto end the phone call.Play/PauseLong press “ ” for 2 seconds to reject the phone call.Receive/In music mode, briefly press “ ” to pause,Hang up phoneand press it again to play. (when phone call comes,callthe music will be off. When phone call is off, the musicwill continue)“ ” Continuously double press “ ” to enter into voice voicefunction. function.“”In music mode, briefly press “” to play next song.Next SongLong press to increase volume.The voice prompt will appear when the volume isVolume Increaseup to Maximum.“”In music mode, briefly press “” to play previousPrevious songVolume Decreasesong. Long press to decrease volume.“”&“”Simultaneously press “”and “” to redial the lastRe-dial the lastphone numberphone number“” & “”Simultaneously press “”and “” for 3 secondsRestore factoryto restore factory defaultsdefaults3. How to connect with two Bluetooth mobilephones:(1) Turn on the Bluetooth function of mobile phone 1.(2) Long press the“ ” for 4 seconds until the red and blueindicators take turns to flash, then connect phone 1.(3) Press “ ” for 2 seconds, Bluetooth headphone enters intopairing mode, the red and blue indicators take turns to flash,meanwhile phone 1 is disconnected.(4) Turn on the Bluetooth function of mobile phone 2, findthe headphone “KBJ-266N” from the device list and makeconnection.(5) If system prompted for a password, input the password0000 (four zero), then connect Bluetooth headphonewith mobile phone 2.(6) Turn off the Bluetooth headphone and return on, theheadphone will be connected with both mobile phonesautomatically. The voice “phone 1 connected, phone 2connected ” will appear in English.※When the headphone is connected with two mobile phones,some functions of the mobile phones may cannot worknormally.※After paired with phone, it will display the battery power barof the Bluetooth headphone in phone.
蓝牙蓝牙4. Voice Prompt FunctionVoice PromptStatusPower onWhen you turn the headphone onPairingWhen entering into pairing modeConnectedWhen you connect the first mobilephoneConnectedWhen you connect the secondmobile phoneDisconnectedWhen you disconnect the headphonefrom the fist mobile phoneDisconnectedWhen you disconnect the headphonefrom the second mobile phoneIncoming callWhen a call comes inVolume maxWhen the volume is up to themaximumPower offWhen you turn the headphone off5.Bluetooth Indicator StatusWork StatusIndicator Light StatusRemarkSwitch onBlue indicator is on for 1 secondVoice PromptSwitch offRed indicator is on for 1 secondVoice PromptPairingRed and blue indicators takeVoice Promptturns to flashIncoming callBlue indicator flashes 1 timeVoice Promptevery 5 secondsConnectionBlue indicator flashes 1 timeevery 5 secondsPhone callBlue indicator flashes 1 timeevery 5 secondsPlay musicBlue indicator flashes 1 timeevery 5 secondsLow batteryRed indicator flashes all the timeVoice PromptwarningChargingRed indicator is on all the timewhen charging, and is off whenfull charging6.Headphone ChargingThis headphone is equipped with built-in non-detachable andrechargeable lithium battery.Please make sure that the battery is charged full for the firsttime use.■ Connect the charger to the charging port.■ Insert the charger into the standard power outlet. redindicator will be on when charging. If without charging,please plug out the travel charger first, then connect itagain.■ After full charging, red indicator will be off. Please plug outthe travel charger from the power outlet and headphone.■ It will reduce the battery performance after long time /repeatable charge and dis-charge. And it is normalphenomenon for all the rechargeable battery.■ Please do not dial or receive phone call during charging,and please plug out the charger from the headphone, thenreceive the phone call. When the battery is low, theheadphone will appear the voice prompt and the redindicator will flash.■ The headphone will be off when charging.※If the headphone shut down without battery during thephone, calls transfer to mobile phone automatically※If the coming calls from two connected mobile phones atthe same time, can only can refuse the main mobile phonecoming call7．Audio cable connectionLine Insert 3.5mm audio cable into headphone 3.5mm plugport, the other part into audio output device(MP3/PC), thenyou can enjoy music. When the Bluetooth headphone is on,the Bluetooth function will be off if inserting the audio cable.8.Project Specification and Instruction- Bluetooth Version : 4.0 (CSR8635)- Supported devices: Bluetooth mobile phones, Bluetoothspeakers Bluetooth PC and other Bluetooth devices- Maximum work range: 33 Feet (10 Meters)- Talk time: Around 15 Hours- Music play: Around 13 Hours- Charging time: 4 Hours- Charging Voltage: DC 5V- Work Voltage: 3.7V- Sensitivity: 83±3dB- Battery Capacity: 420mAh- Frequency Response: 2.402GHz~2.480GHz※The actual time may vary from mobile phone types andfunctions.Bluetooth Headphone

Navigation menu