Compupal Group PS10BTA Bluetooth Speaker User Manual PS10BT 120921QU 10 0
Compupal Group Corporation Bluetooth Speaker PS10BT 120921QU 10 0
user manual
Speaker
connection
Charging
When the build-in battery
is
out
of
power, connect the speaker to USB
power source with the USB cable. The LED will be red when it is charging.
The red LED will be
off
after the battery is filled.
To
source: such as PC.
1. Take out the speaker.
2. Plug the mini USB plug to the
speaker
mini USB
jack
and
another
USB-A
plug to PC. (This is also
for
charging.
If
the built-in battery can still work,
do
not
have to plug
the
USB); Plug 3.5mm audio plug to PC.
3. Turn on the speaker, put
it
into
your
enjoyable volume.
4. The blue LED will
display
for
power
indication.
5. Play music on audio source (PC) and make
sure
there is
output
from PC.
6. You can control the volume on
your
PC.
To
source: such as Bluetooth devices.
1. Take
out
the
speaker.
2. Turn on the speaker, the
speaker
will
automatically
go to the pairing
mode, and the blue LED will
fast
twinkle.
3. Activate the Bluetooth feature
on
the phone or other devices, and then
use their setting to add/search/discover new Bluetooth devices.
4. Select ·PS10BT· from the list
of
Bluetooth devices shown
on
the phones
or other devices.
If
ask for apass code, enter four zeros ·0000·. Some
phones also ask to confirm headset connection after pairing.
5.
Blue
LED
will stop flashing but keep solid after the speaker
is
successfully
paired
6. After connection. play the music and enjoy the
on
the speaker,
Adjust
the volume by the knob
in
your favorite.
To.ouree:
15uch., PC.
compupal
This device complies with Part
15
of
the FCC Rules. Operation is subject to the following
two
conditions: (1) This device may
not
cause harmful interference, and (2) this device
must
accept any interference received, including interference that may cause undesired
operation.
For
more
questions
or
need
assistance
with
your
speakers,
please
visit:
htto://www.compupal.com.cn
or
contact
by
email:
servjce@compupalcom.cn
NOTE: This equipment has been tested and
found
to comply with the limits
for
a
Class Bdigital device,
pursuant to Part
15
of
the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and,
if
not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not
occur
in aparticular installation.
If
this equipment does cause harmful interference to radio
or
television reception,
which
can be determined
by
turning the equipment
off
and on, the user is
encouraged to
try
to correct the interference
by
one
or
more
of
the following
measures:
--
Reorient
or
relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--
Connect the equipment into
an
outlet on acircuit different from that to
which
the
receiver is connected.
--
Consult the dealer
or
an
experienced radiorTY technician
for
help.
FCC Caution:
Any
changes
or
modifications
not
expressly approved
by
the party
responsible
for
compliance could void the user's authority to operate this equipment.
@2010AII rights reserved by Compupal (Group) Corp.,
No.1555
Jiashan Avenue, Jiashan, 314113. Zhejiang. P.R.C.
Specifications
are
subject
to change
without
notice.
Error
and
omissions
excepted.
Images and
illustrations
may
not
always
match
contents.
All
other
trademarks
are
the
property
of
their respective owners.
Symptom
Solution
LEO
is
not
Make
sure
the
USB
jack
has
power
or
the
batter
is
light
filled.
Verify
the
speaker
is
getting
power
and
batter
is
filled.
Make
sure
the
Bluetooth
is
successfully
connected
when
in
Bluetooth
Mode.
Speaker
Make
sure
the
volume
is
turned
up
to
audible
listening
does
not
level.
produce
Verify
that
on
PC
that
the
speaker
is
not
under
Mute
sound
status.
Test
the
speaker
on
another
PC.
if
your
speaker
is
working
well
on
another
audio
source,
then
the
speaker
is
ok.
WAV
and
MID
files
are
often
poor
quality.
therefore
Sound
is
distortion
and
noise
are
easily
noticed
with
high
distortion
powered
speakers
Check
the
operating
system
level
and
decrease
if
necessary
Specification
•Total RMS power: 1.3 W@1kHz, @10% THO@ 10% THO
•Total
peak
power:
2.6
W
•Signal-to-noise ratio:
>70dB
•Drivers: 2" x 1 high-excursion
driver
•Frequency response: 200Hz -20KHz
•Drivers: 50mm neodymium type micro drivers
•Dimension:
77x70x66mm
(WxDxH)
Trouble
shooting
See below for solutions
to
common problems. if you have more questions
to
your speaker, please visit ourweb www.compupal.com.cn for assistance.
To
eouroe:
such
8fI
'1~
BkJelDolh
devlC8ll.
..
-
To
pow.raupply:
PC
USB
porl
To
power
lIupply:
PC USB port
1r:=J1
~
IP
~J
II
~,'