Computational Systems orporated 4100 User Manual Info

Computational Systems Incorporated Users Manual Info

Users Manual Info

Information sheet for Model 4100 Radio Sensor. To be printed on the flaps of thebox containing the sensor at top assembly package.***********************************************************************This device is a component of the Status Technologies Wireless Sensor System. Itmust be used with appropriate Model 4200/4210 Transceivers (FCC ID:NL54200/NL54210) and an appropriate accessory support package. The instructionsfor installation and operation of this device are contained with in a manualsupplied as a component of the accessory support package.WARNING: The 4100 RF Sensor is powered by lithium batteries.Lithium batteries are a fire, explosion, and severe burn hazard. Do notrecharge, diassemble, heat above 100 degrees C. , incinerate, or expose contentsto water.NOTICE: The batteries should be promptly removed from the unit when the end oftheir life is reached. The exhausted batteries must be disposed of in anacceptable manner.NOTE: This equipment has been tested and found to comply with the limits for aClass A digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference when theequipment is operated in a commercial environment. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used inaccordance with the instruction manual, may cause harmful interference to radiocommunications. Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will be required to correctthe interference at his own expense.Operation of this device is subject to the two following conditions: (1) Thisdevice may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesiredoperation.This device was tested and approved in the design and configuration which issupplied in this package. It must be installed and used in the manner describedin the user manual supplied with the accessory package. The design must not bemodified in any way. Such modifications could void the users authority tooperate the equipment.

Navigation menu