Computational Systems orporated 8215 Laser Alignment Fixture User Manual ProAlign Plus FrontEnd CE
Computational Systems Incorporated Laser Alignment Fixture ProAlign Plus FrontEnd CE
Contents
ManualFront
Reference Manual
UltraSpec
®
ProAlign Plus
Laser Alignment
Analyzer and Fixtures
CSI Part #97505 Rev.0
ii
Copyright
©
2001 by Computational Systems, Incorporated.
All rights reserved.
No part of this publication may be reproduced, trans-
mitted, transcribed, stored in a retrieval system, or
translated into any language in any form by any means
without the written permission of Computational
Systems, Incorporated (CSI).
Disclaimer
This manual is provided for informational purposes.
C
OMPUTATIONAL
S
YSTEMS
, I
NCORPORATED
M
AKES
N
O
W
ARRANTY
O
F
A
NY
K
IND
W
ITH
R
EGARD
T
O
T
HIS
M
ATERIAL
, I
NCLUDING
, B
UT
N
OT
L
IMITED
T
O
, T
HE
I
MPLIED
W
ARRANTIES
O
F
M
ERCHANTABILITY
A
ND
F
ITNESS
F
OR
A P
ARTICULAR
P
URPOSE
. Computational
Systems, Incorporated shall not be liable for errors,
omissions, or inconsistencies that may be contained
herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of
this material. Information in this document is subject
to change without notice and does not represent a
commitment on the part of Computational Systems,
Incorporated. The information in this manual is not all-
inclusive and cannot cover all unique situations.
Product Support
Should you have any comments on this documenta-
tion or questions concerning the Agreement on the
following pages, please contact CSI’s Product Support
Department.
Address:
Computational Systems, Incorporated
835 Innovation Drive
Knoxville, TN 37932 USA
Phone:
United States and Canada: 865-671-4274
Spanish-speaking customers: 865-675-2377
FAX:
865-675-4893
Internet E-mail:
United States and Canada: custserv@compsys.com
International: intlhelp@compsys.com
Worldwide Web:
http://www.CSImeansReliability.com
Reference Manual
This document was written, illustrated, and produced
by CSI’s Engineering Publications Group on Power
Macintosh
™
workstations using Adobe
™
FrameMaker
®
,
Adobe PhotoShop
®
, and Macromedia
®
FreeHand
™
.
Printed copies are produced using the Xerox
™
DocuTech
™
publishing system.
Trademarks and Servicemarks
AccuTrend; Changing the way the world performs
maintenance, and CSI logo; CSI
RBM
‚(Mexico); Doctor
Know; Infranalysis; InfraRoute; Levels of Awareness
Training; M&D; MachineGuard; MachineView;
MasterNet; MotorView; Nspectr; O&M Workstation;
OilView (Japan); RBMware; Reliability-Based Mainte-
nance, and logo; RollView; StarterTrend; STATUS
Technologies; TrendSetter; Tribology Minilab;
UltrasSpec; and WAVEPAK are registered trademarks
of Computational Systems, Incorporated.
CSI (China, Japan, Venezuela, Australia); CSI
RBM
(Vene-
zuela); Status Condition Monitor; PeakVue; RBMview;
RBMware (Australia, China, Japan); RBMwizard; Reli-
ability-Based Maintenance (Venezuela); SonicScan;
SonicView; SST; STATUS RF SmartSensor; STATUS RF
Transceiver; VersaBal; VibPro; VibView; and Weld-
watch are pending trademarks of Computational
Systems, Incorporated.
Lubricant Profile and Trivector are registered service-
marks of Computational Systems, Incorporated.
RBM; RBMware (China); Reliability-Based Mainte-
nance (Venezuela); and STATUS Technologies and
design are pending servicemarks of Computational
Systems, Incorporated.
Adobe is a trademark and FrameMaker and PhotoShop
are registered trademarks of Adobe Systems, Inc.
Power Macintosh is a trademark of Apple Computer,
Inc. Macromedia is a registered trademark and Free-
Hand is a trademark of Macromedia, Inc. Xerox and
DocuTech are trademarks of Xerox Corporation.
All other brand or product names are trademarks or
registered trademarks of their respective companies.
Patents
The product(s) described in this manual are covered
under existing and pending patents.
iii
License Agreement
I
MPORTANT
: C
AREFULLY
R
EAD
A
LL
T
HE
T
ERMS
A
ND
C
ONDITIONS
O
F
T
HIS
A
GREEMENT
B
EFORE
O
PENING
T
HE
P
ACKAGE
O
R
P
ROCEEDING
W
ITH
I
NSTAL-
LATION
. O
PENING
T
HE
P
ACKAGE
OR
C
OMPLETING
T
HE
I
NSTALLATION
I
NDI-
CATES
Y
OUR
A
CCEPTANCE
O
F
T
HE
T
ERMS
A
ND
C
ONDITIONS
C
ONTAINED
I
N
T
HIS
A
GREEMENT
.
I
F
Y
OU
D
O
N
OT
A
GREE
T
O
T
HE
T
ERMS
A
ND
C
ONDITIONS
C
ONTAINED
I
N
T
HIS
A
GREEMENT
, C
ANCEL
A
NY
I
NSTALLATION
, P
ROMPTLY
R
ETURN
T
HIS
P
RODUCT
A
ND
T
HE
A
SSOCIATED
D
OCUMENTATION
T
O
CSI A
ND
Y
OUR
M
ONEY
W
ILL
B
E
R
EFUNDED
. N
O
R
EFUNDS
W
ILL
B
E
G
IVEN
F
OR
P
RODUCTS
W
ITH
D
AMAGED
O
R
M
ISSING
C
OMPONENTS
.
Definition of Software
As used herein, software refers to any computer program contained on
any medium. Software includes downloadable firmware for use in
devices such as analyzers or MotorSTATUS
™
units and it includes
computer programs executable on computers or computer networks.
Software License
You have the non-exclusive right to use this software on only one device
at a time. You may back-up the software for archival purposes. For
network systems, you have the non-exclusive right to install this software
on only one server. Read/write access is limited to the number of licenses
purchased. The number of read-only accesses is not limited.
Software Updates
CSI agrees to provide Purchaser, at no charge except for media, prepara-
tion and shipping charges, for one (1) year from the date of purchase,
updates to the software made at the sole discretion of CSI. Should
Purchaser desire to purchase software maintenance for the next
succeeding year following the first year from the date of purchase, and
thereafter on an annual basis, and if CSI is still providing maintenance,
Purchaser may purchase the same, annually, at the then existing rate.
Updates/Upgrades
Upon receipt of new CSI software replacing older CSI software, you have
30 days to install and test the new CSI software on the same or a different
device. At the end of the 30-day test period, you must both remove and
return the new CSI software or remove the older CSI software.
Ownership
The licensed software and all derivatives are the sole property of CSI
Technology, Inc. You may not disassemble, decompile, reverse engineer
or otherwise translate the licensed program. You may not distribute
copies of the program or documentation, in whole or in part, to another
party. You may not in any way distort, or otherwise modify the program
or any part of the documentation without prior written consent from CSI.
Transfer
You may transfer the software and license to another party only with the
written consent of CSI and only if the other party agrees to accept the
terms and conditions of this Agreement. If you transfer the program, you
must transfer the documentation and any backup copies or transfer only
the documentation and destroy any backup copies.
Copyright
The software and documentation are copyrighted. All rights are reserved.
Termination
If you commit a material breach of this Agreement, CSI may terminate
the Agreement by written notice.
Virus Disclaimer
CSI uses the latest virus checking technologies to test all its software.
However, since no anti-virus system is 100% reliable, we strongly advise
that you use an anti-virus system in which you have confidence to verify
the software is virus-free. CSI makes no representations or warranties to
the effect that the licensed software is virus-free.
NO WARRANTY
THE PROGRAM IS PROVIDED “AS-IS” WITHOUT ANY WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTIC-
ULAR PURPOSE.
LIMITATION OF LIABILITY AND REMEDIES
IN NO EVENT WILL CSI BE LIABLE TO YOU OR ANY THIRD PARTY
FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST
SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR THE INABILITY TO USE THIS
PROGRAM. THE LICENSEE’S SOLE AND EXCLUSIVE REMEDY IN THE
EVENT OF A DEFECT IN WORKMANSHIP OR MATERIAL IS EXPRESSLY
LIMITED TO THE REPLACEMENT OF THE MEDIA. IN NO EVENT WILL
CSI'S LIABILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT.
Export Restrictions
You agree to comply fully with all laws, regulations, decrees and orders
of the Unites States of America that restrict or prohibit the exportation (or
reexportation) of technical data and/or the direct product of it to other
countries, including, without limitation, the U.S. Export Administration
Regulations.
U.S. Government Rights
The programs and related materials are provided with “RESTRICTED
RIGHTS.” Use, duplication or disclosure by the U.S. Government is
subject to restrictions set forth in the Federal Acquisition Regulations and
its Supplements.
iv
Hardware Technical Help
1. Please have the number of the current version of
your firmware ready when you call. The version
of the firmware in CSI’s Model 2100 series, Model
2400, and other analyzers appears on the power-
up screen that is displayed when the analyzer is
turned on.
2. If you have a problem, explain the exact nature of
your problem. For example, what are the error
messages? When do they occur? Know what you
were doing when the problem occurred. For
example, what mode were you in? What steps did
you go through? Try to determine before you call
whether the problem is repeatable.
Hardware Repair
CSI repairs and updates its hardware products free for
one year from the date of purchase. This service
warranty includes hardware improvement, modifica-
tion, correction, recalibration, update, and mainte-
nance for normal wear. This service warranty excludes
repair of damage from misuse, abuse, neglect, care-
lessness, or modification performed by anyone other
than CSI.
After the one year service warranty expires, each
return of a CSI hardware product is subject to a
minimum service fee. If the cost of repair exceeds this
minimum fee, we will call you with an estimate before
performing any work. Contact CSI’s Product Support
Department for information concerning the current
rates.
Obsolete Hardware
Although CSI will honor all contractual agreements
and will make every effort to ensure that its software
packages are “backward compatible,” to take advan-
tage of advances in newer hardware platforms and to
keep our programs reasonably small, CSI reserves the
right to discontinue support for old or out-of-date
hardware items.
Software Technical Help
1. Please have the number of the current version of
your software ready when you call. The version
number for software operating under MS-DOS®
appears at the top of every menu screen. The
version number for software operating under
Windows® is displayed by selecting “About” under
the Help menu bar item.
2. If you have a problem, explain the exact nature of
your problem. For example, what are the error
messages? (If possible, make a printout of the error
message.) When do they occur? Know what you
were doing when the problem occurred. For
example, what mode were you in? What steps did
you go through? Try to determine before you call
whether the problem is repeatable.
3. Please be at your computer when you call. We can
serve you better when we can work through the
problem together.
Software Technical Support
CSI provides technical support through the following
for those under maintenance contracts:
• Telephone assistance and communication via the
Internet.
• Mass updates that are released during that time.
• Interim updates upon request. Please contact CSI
Customer Services for more information.
Returning Items
1. Call Product Support (see page 2) to obtain a return
authorization number. Please write it clearly and
prominently on the outside of the shipping
container.
2. If returning for credit, return all accessories
originally shipped with the item(s). Include cables,
software diskettes, manuals, etc.
3. Enclose a note that describes the reason(s) you are
returning the item(s).
4. Insure your package for return shipment. Shipping
costs and any losses during shipment are your
responsibility. COD packages cannot be accepted
and will be returned unopened.
v
CE Notice
CSI products bearing the symbol on the product
or in the user’s manual are in compliance with appli-
cable EMC and Safety Directives of the European Union.
In accordance with CENELEC standard EN 50082-2,
normal intended operation is specified as follows:
1. The product must not pose a safety hazard.
2. The product must not sustain damage as a result of
use under environmental conditions specified in
the user documentation.
3. The product must stay in or default to an operating
mode that is restorable by the user.
4. The product must not lose program memory, user-
configured memory (e.g., routes), or previously
stored data memory. When apparent, the user may
need to initiate a reset and/or restart of a data
acquisition in progress.
vi