Computime CTL3573A ZigBee Module User Manual USER manual
Computime Limited ZigBee Module USER manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1692781 |
| Application ID | nf3cGkurE877t3doBYe6Bw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 18.41kB (230118 bits) |
| Date Submitted | 2012-05-08 00:00:00 |
| Date Available | 2012-05-08 00:00:00 |
| Creation Date | 2012-04-17 19:51:14 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2012-05-04 11:23:07 |
| Document Title | Microsoft Word - USER manual.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | zmp |
ZigBee-Ready RF Transceiver Module (IEEE 802.15.4) CTL3570/1/2/3 The reproduction of this datasheet is NOT allowed without approval of Computime Limited. All information and data contained in this datasheet are subject to change without notice. This publication supersedes and replaces all information previously supplied. Computime has no responsibility to the consequence of using the information described in this document. Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 Revision Rev. Date (DD-MM-YYYY) 18-09-2011 04-11-2011 History First Release Update Pin assignment Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 Table of Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. General Description...................................................................................................................................... 0 Applications .................................................................................................................................................. 0 Features ....................................................................................................................................................... 0 Absolute Maximum Ratings.......................................................................................................................... 1 Recommended Operating Conditions .......................................................................................................... 1 Electrical Specifications................................................................................................................................ 1 Typical application block .............................................................................................................................. 3 Pin Assignment............................................................................................................................................. 3 Pin Description ............................................................................................................................................. 4 Block Diagram......................................................................................................................................... 11 RF Frequency Detail ............................................................................................................................... 13 PCB Layout Recommendations.............................................................................................................. 13 Mechanical Dimensions.......................................................................................................................... 14 Modules Differentia ................................................................................................................................. 15 Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 1. General Description The CTL357x RF Transceiver Module is compact surface mounted Module specially designed for Ember ZigBee™ protocol stack for wireless networks, EmberZNet, based on IEEE 802.15.4 standard in the 2.4GHz world-wide ISM band. The complete module is only 32.4 x 25.4 x 4.1 mm. It integrated a 2.4GHz, IEEE 802.15.4-2003 compliant transceiver with a 32-bit network processor (ARM Cortex-M3 Processor). It contains embedded Flash and integrated RAM for program and data storage. It utilizes the non-intrusive SIF module for powerful software debugging and programming of the network processor. 2. Applications Home automation & building control 3. Home appliances & alarms Monitoring of remote systems Security systems & lighting controls Sensor data capture in embedded networks Features Complete ZigBee-ready module with integrated PCB antenna Integrated IEEE 802.15.4 PHY and MAC layer Non-intrusive debug interface (SIF) SPI interface for communication and controlled by the Host using the EmberZNet Serial Protocol (EZSP) Internal RC oscillator for timer High performance direct sequence spread spectrum (DSSS) RF transceiver 16 channels in the 2.4 GHz ISM band On-chip regulator for 2.1-3.6V operation , three sleep low power modes 32-bit ARM® Cortex™-M3 processor 192KB FLASH ROM and 12KB RAM (EM357 internal) ,8Mb off chip Flash memory (CTL3571&CTL3573) +5dBm transmission power (Boost mode up to +8dBm) -98dBm excellent reception sensitivity. (Boost mode -101dBm) Small footprint: 32.4 x 25.4 x 4.1 mm Extremely low Deep Sleep Current. Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 4. Absolute Maximum Ratings Parameter Test Conditions Regulator input voltage (VDD_PADS) RF Input Power (for max level for correct packet reception) Min. -0.3 RX signal into a lossless balun Max. Unit +3.6 +15 dBm Voltage on any GPIO (PA[7:0], PB[7:0], PC[7:0]), SWCLK, nRESET, VREG_OUT -0.3 VDD_PADS +0.3 Voltage on any GPIO pin (PA4, PA5, PB5, PB6, PB7, PC1), when used as an input to the general purpose ADC with the low voltage range selected -0.3 2.0 Voltage on OSCA, OSCB, NC -0.3 VDD_PADSA +0.3 Storage temperature -40 +140 °C 5. Recommended Operating Conditions Parameter Test Conditions Regulator input voltage (VDD_PADS) Operating temperature range Min. Typ. Max. ① Unit 2.7 3.6 +70② °C Max Unit 2.5 GHz 6. Electrical Specifications T=25℃, VCC = 3.0V, Fo =2450MHZ, if nothing else stated. Parameter Condition / Note Min Operating frequency Programmable in 5MHz steps, 5 MHz steps for IEEE 802.15.4 compliance 2.4 Number of channels For IEEE 802.15.4 compliance 16 Channel spacing For IEEE 802.15.4 compliance MHz 50 Ohm Input/output impedance Frequency stability Transmit power ① ② Programmable from firmware -55 Typ. +/-40 ppm dBm Regulator input voltage from 2.1 to 3.6V for module CTL3570 and CTL3572. Operationg temperature range from -40 to 85°C for module CTL3570 and CTL3572. Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 Parameter Condition / Note Min Sensitivity PER = 1% PER, 20byte packet defined by IEEE 802.15.4 Boost mode -98 dBm Adjacent channel rejection +/-5 MHz IEEE 802.15.4 compliance at -82 dBm 35/35 dB Adjacent channel rejection +/-10 MHz IEEE 802.15.4 compliance at -82 dBm 40/40 dB -6 dB Co-channel rejection Supply voltage Typ. Max 3.6 ③ 2.7 Unit Max RX sensitivity (normal mode) 28 mA Max RX sensitivity (boost mode) 30 mA Current consumption, TX mode 42 mA Deep sleep current 5.0④ μA Flash Memory 192⑤ KB MCU clock frequency 24 MHz Current consumption, RX mode ③ Supply voltage from 2.1 to 3.6V for module CTL3570 and CTL3572. Deep sleep current less than 8 uA for module CTL3571 and CTL3573. ⑤ Only CTL3571 and CTL3573 have 8Mb off chip flash memory on the RF module. ④ Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 7. Typical application block HOST MCU VDD_PADS=2.7- 3.6V 24MHz NREST PTI_EN Debug and programming PTI-DATA SIF_CLK 32.768kHz 8Mb flash CTL357x RF Module SIF-MISO interface SIF-MOSI NSIF_LOAD SDBG LINK_ACTIVITY Figure 1: Example of application circuit 8. Pin Assignment Figure 2: CTL357x pin assignment Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 9. Pin Description Pin# CTL3570 CTL3571 CTL3572 CTL3573 Direction JTCK JTCK JTCK SWCLK SWCLK SWCLK SWCLK I/O Serial Wire Clock input/output with debugger PC2 PC2 PC2 PC2 I/O Digital I/O Enable GPIO_DBGCFG[5] JTDO JTDO JTDO JTDO SWO SWO SWO SWO Serial Wire Output asynchronous trace output to PC3 PC3 PC3 PC3 I/O Digital I/O Enable GPIO_DBGCFG[5] JTDI JTDI JTDI JTDI PC4 PC4 PC4 PC4 I/O JTMS JTMS JTMS JTMS SWDIO SWDIO SWDIO SWDIO I/O Serial Wire bidirectional data to/from debugger PC0 PC0 PC0 PC0 I/O High current Digital I/O Either Enable with GPIO_DBGCFG[5] JRST JRST JRST JRST IRQD IRQD IRQD IRQD JTCK Description JTAG clock debugger input from with JTAG data out to debugger with JTAG data in from debugger Digital I/O Either Enable with GPIO_DBGCFG[5] JTAG mode debugger select from JTAG reset input from debugger TRACEDATA1 TRACEDATA1 TRACEDATA1 TRACEDATA1 Default external interrupt source Synchronous CPU trace data bit PB7 PB7 PB7 PB7 I/OHigh current ADC2 ADC2 ADC2 ADC2 Analog Copyright © 2011 Computime Limited. All rights reserved. Digital I/O ADC input 2 Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 Pin# Default external interrupt source IRQC IRQC IRQC IRQC TIM1C2 TIM1C2 TIM1C2 TIM1C2 TIM1C2 TIM1C2 TIM1C2 TIM1C2 PB6 PB6 PB6 PB6 I/O High current ADC1 ADC1 ADC1 ADC1 Analog IRQB IRQB IRQB IRQB TIM1C1 TIM1C1 TIM1C1 TIM1C1 TIM1C1 TIM1C1 TIM1C1 TIM1C1 Timer 1 channel 2 output Timer 1 channel 2 input Digital I/O ADC input 1 External interrupt source B Timer 1 channel 1 output Timer 1 channel 1 input CTL3570 CTL3571 CTL3572 CTL3573 Direction Description PA7 PA7 PA7 PA7 I/O High current TIM1C4 TIM1C4 TIM1C4 TIM1C4 Timer 1 channel 4 output TIM1C4 TIM1C4 TIM1C4 TIM1C4 Timer 1 channel 4 input REG_EN REG_EN REG_EN REG_EN External regulator open drain output PC1 PC1 PC1 PC1 I/O Digital I/O ADC3 ADC3 ADC3 ADC3 SWO SWO SWO SWO Digital I/O Disable REG_EN with GPIO_DBGCFG [4] Analog ADC input 3 TRACEDATA0 TRACEDATA0 TRACEDATA0 TRACEDATA0 10 GND GND GND Serial Wire Output asynchronous trace output to Synchronous CPU trace data bit 0 GND Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 Digital I/O PB3 PB3 PB3 PB3 I/O TIM2C3 TIM2C3 TIM2C3 TIM2C3 Timer 2 channel 3 output TIM2C3 TIM2C3 TIM2C3 TIM2C3 Timer 2 channel 3 input SC1nCTS SC1nCTS SC1nCTS SC1nCTS UART CTS handshake of Serial Controller 1 SC1SCLK SC1SCLK SC1SCLK SC1SCLK SPI master clock of serial Controller 1 SC1SCLK SC1SCLK SC1SCLK SC1SCLK SPI slave clock of serial Controller 1 GND GND GND GND PC6 PC6 11 12 13 OSC32B OSC32B I/O Digital I/O I/O 32.768KHz crystal oscillator Inverted TX_ACTIVE signal NTX_ACTIVE NTX_ACTIVE PC7 PC7 I/O 14 OSC32A OSC32A I/O OSC32_EXT OSC32_EXT 15 PC5 PC5 PC5 PC5 I/O 16 VDD_PADS VDD_PADS VDD_PADS VDD_PADS Power 17 nRESET nRESET nRESET nRESET Pin# 18 CTL3570 CTL3571 CTL3572 CTL3573 Direction PA0 PA0 PA0 PA0 I/O Copyright © 2011 Computime Limited. All rights reserved. Digital I/O 32.768KHz crystal oscillator Digital 32.768KHz clock input source Digital I/O Pads supply(2.1-3.6V) Active low chip reset(internal pull-up) Description Digital I/O Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 TIM2C1 TIM2C1 TIM2C1 TIM2C1 Timer 2 channel 1 output TIM2C1 TIM2C1 TIM2C1 TIM2C1 Timer 2 channel 1 input SC2MOSI SC2MOSI SC2MOSI SC2MOSI SPI master data out of serial controller SC2MOSI SC2MOSI SC2MOSI SC2MOSI SPI slave data in of serial controller 2 SI Serial data in for 8Mb flash SI 19 Digital I/O PA1 PA1 PA1 PA1 I/O TIM2C3 TIM2C3 TIM2C3 TIM2C3 Timer 2 channel 3 output TIM2C3 TIM2C3 TIM2C3 TIM2C3 Timer 2 channel 3 input SC2SDA SC2SDA SC2SDA SC2SDA I/O TWI data of serial controller 2 SC2MISO SC2MISO SC2MISO SC2MISO SPI slave data out of serial controller 2 SC2MISO SC2MISO SC2MISO SC2MISO SPI master data in of serial controller 2 SO Serial data out of 8Mb flash SO 20 ⑥ Digital I/O PA2 PA2 PA2 PA2 I/O TIM2C4 TIM2C4 TIM2C4 TIM2C4 Timer 2 channel 4 output TIM2C4 TIM2C4 TIM2C4 TIM2C4 Timer 2 channel 4 input SC2SCL SC2SCL SC2SCL SC2SCL I/O TWI clock of serial controller 2 SC2SCLK SC2SCLK SC2SCLK SC2SCLK SPI master clock of serial controller 2 ⑥ The SI,SO,SCK and CE# on the module pin18,19,20 and 23 are connected to the off chip 8Mbit SPI Serial Flash(SST25VF080B).Details information about the flash memory ,refers to its datasheet. It applys to the module CTL3571 and CTL3573. Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 SC2SCLK SC2SCLK SC2SCLK SC2SCLK SPI slave clock of serial controller 2 SCK Clock in for 8Mb flash SCK 21 22 Pin# PA6 PA6 PA6 PA6 I/O High current TIM1C3 TIM1C3 TIM1C3 TIM1C3 Timer 1 channel 3 output TIM1C3 TIM1C3 TIM1C3 TIM1C3 Timer 1 channel 3 input PB4 PB4 PB4 PB4 I/O TIM2C4 TIM2C4 TIM2C4 TIM2C4 Timer 2 channel 4 output TIM2C4 TIM2C4 TIM2C4 TIM2C4 Timer 2 channel 4 input SC1nRTS SC1nRTS SC1nRTS SC1nRTS UART RTS controller 1 SC1nSSEL SC1nSSEL SC1nSSEL SC1nSSEL SPI slave select of serial controller 1 Digital I/O Digital I/O of serial CTL3570 CTL3571 CTL3572 CTL3573 Direction PA3 PA3 PA3 PA3 I/O SC2Nssel SC2Nssel SC2Nssel SC2Nssel SPI slave select of serial controller 2 TRACECLK TRACECLK TRACECLK TRACECLK Synchronous clock TIM2C2 TIM2C2 TIM2C2 TIM2C2 Timer 2 channel 2 output TIM2C2 TIM2C2 TIM2C2 TIM2C2 Timer 2 channel 2 input CE# Chip Enable of 8Mb falsh PA4 I/O 23 CE# 24 handshake PA4 PA4 PA4 Copyright © 2011 Computime Limited. All rights reserved. Description Digital I/O CPU trace Digital I/O Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 ADC4 ADC4 ADC4 ADC4 Analog PTI_EN PTI_EN PTI_EN PTI_EN Frame signal of packet trace interface Synchronous CPU trace data bit 2 TRACEDATA2 TRACEDATA2 TRACEDATA2 TRACEDATA2 25 26 Pin# 27 ADC input 4 Digital I/O PA5 PA5 PA5 PA5 I/O ADC5 ADC5 ADC5 ADC5 Analog PTI_DATA PTI_DATA PTI_DATA PTI_DATA Data signal of packet trace interface NBOOTMODE NBOOTMODE NBOOTMODE NBOOTMODE Embedded serial bootloader activation out of reset TRACEDATA3 TRACEDATA3 TRACEDATA3 TRACEDATA3 Synchronous CPU trace data bit 3 ADC input 5 Digital I/O PB1 PB1 PB1 PB1 I/O SC1MISO SC1MISO SC1MISO SC1MISO SPI slave data out of serial controller 1 SC1MOSI SC1MOSI SC1MOSI SC1MOSI SPI master data out of serial controller 1 SC1SDA SC1SDA SC1SDA SC1SDA I/O TWI data of serial controller 1 SC1TXD SC1TXD SC1TXD SC1TXD UART transmit data of serial controller 1 TIM2C1 TIM2C1 TIM2C1 TIM2C1 Timer 2 channel 1 output TIM2C1 TIM2C1 TIM2C1 TIM2C1 Timer 2 channel 1 input CTL3570 CTL3571 CTL3572 CTL3573 Direction PB2 PB2 PB2 PB2 I/O Copyright © 2011 Computime Limited. All rights reserved. Description Digital I/O Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 SC1MISO SC1MISO SC1MISO SC1MISO SPI master data in of serial controller 1 SC1MOSI SC1MOSI SC1MOSI SC1MOSI SPI slave data in of serial controller 1 SC1SCL SC1SCL SC1SCL SC1SCL I/O SC1RXD SC1RXD SC1RXD SC1RXD UART receive data of serial controller TIM2C2 TIM2C2 TIM2C2 TIM2C2 Timer 2 channel 2 output TIM2C2 TIM2C2 TIM2C2 TIM2C2 Timer 2 channel 2 input PB5 PB5 PB5 PB5 I/O ADC0 ADC0 ADC0 ADC0 Analog TIM2CLK TIM2CLK TIM2CLK TIM2CLK Timer 2 external clock input TIM1CLK TIM1CLK TIM1CLK TIM1CLK Timer 1 external clock mask input PB0 PB0 PB0 PB0 I/O VREF VREF VREF VREF Analog O ADC reference output VREF VREF VREF VREF Analog I ADC reference input IRQA IRQA IRQA IRQA External interrupt source A Synchronous CPU trace clock TWI clock of serial controller 1 Digital I/O ADC input 0 28 29 TRACECLK TRACECLK TRACECLK TRACECLK Digital I/O TIM1CLK TIM1CLK TIM1CLK TIM1CLK Timer 1 external clock input TIM2MSK TIM2MSK TIM2MSK TIM2MSK Timer 2 external clock mask input Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 10. Block Diagram 2.1 – 3.6V 24MHz 32 Bit ARM Processor User Application TO HOST MCU IEEE 802.15.4 RF Transceiver TM Zigbee Network Integrated antenna IEEE 802.15.4 MAC CTL3570 2.7 – 3.6V 32 Bit ARM Processor User Application TO HOST MCU ZigbeeTM Network 24MHz 8Mb flash IEEE 802.15.4 RF Transceiver Integrated antenna IEEE 802.15.4 MAC CTL3571 Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 2.1– 3.6V 32.768kHz 32 Bit ARM Processor 24MHz User Application TO HOST MCU TM IEEE 802.15.4 RF Transceiver Zigbee Network Integrated antenna IEEE 802.15.4 MAC CTL3572 2.7 – 3.6V 32.768kHz 32 Bit ARM Processor User Application TO HOST MCU ZigbeeTM Network 8Mb flash 24MHz IEEE 802.15.4 RF Transceiver Integrated antenna IEEE 802.15.4 MAC CTL3573 Figure 3: Block Diagram Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 11. RF Frequency Detail The following table shows the RF channels as defined by the IEEE 802.15.4 standard. RF channel Frequency 11 2405MHz 12 2410MHz 13 2415MHz 14 2420MHz 15 2425MHz 16 2430MHz 17 2435MHz 18 2440MHz 19 2445MHz 20 2450MHz 21 2455MHz 22 2460MHz 23 2465MHz 24 2470MHz 25 2475MHz 26 2480MHz 12. PCB Layout Recommendations Please reference Mechanical Dimensions shown in next section for PCB layout. The area underneath the module should be covered with solder mask in order to prevent short circuit on the test pads on the back side of the module. A solid ground plane under the module is preferred. As the module integrated with onboard PCB trace antenna, the mounting position of the module will have great impact on the RF performance. There should not be any trace, ground plane or metal part underneath or nearby the area of the onboard PCB trace antenna. The figure below shows an example how the module positioned on the mother PCB. Figure 4: A recommended placement of the module on a main PCB Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 13. Mechanical Dimensions Figure 5: Mechanical Dimensions of CTL357x .8 Recommended PCB footprint Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 14. Modules Differentia Computime Model No. CTL3570 CTL3571 CTL3572 CTL3573 32kHz Crystal 8Mbit Flash Memory FCC STATEMENT Part 15.19 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Part 15.21 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Part 15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Part 2.1091 For purposes of this section, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. In this context, the term “fixed location” means that the device is physically secured at one location and is not able to be easily moved to another location. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter separation requirement. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: DI2-CTL3573A Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 Canada information: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. If the IC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module IC: 1700D-CTL3573A IC RF warning statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Copyright © 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 Contact information COMPUTIME CORPORATE HQ 17/F, Great Eagle Centre, 23 Harbour Road, Wanchai, Tel: +852.2260.0300 Fax: +852.2790.3996 e-mail: hq@computime.com COMPUTIME NORTH AMERICA HQ, 4700 Duke Dr. Suite 200 Mason OH 45040 USA Tel: +1(513).398.2579 Fax: +1(513).754.8955 e-mail: na@computime.com CINCINNATI WIRELESS SOLUTIONS LTD 4700 Duke Dr. Suite 200 Mason OH 45040 USA Tel: +1(513).754.8935 Fax: +1(513).754.8955 e-mail: ctws@computime.com COMPUTIME JAPAN 3-18-9 Roppongi Minatoku, Tokyo 106-0032, Japan Tel: (03).3583.8411 Fax: (03).3583.3799 e-mail: cj@computime.com About Computime Founded in 1974, Computime is a global technology, brand and manufacturing company providing innovative automation and control solutions to customers in commercial, industrial and consumer markets. The Company provides technologies and products that save energy and make people's lives more productive and comfortable. Copyright © 2011 Computime Limited. All rights reserved. Rev. 3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c320 44.284297, Sun Apr 15 2007 17:19:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2012:05:04 11:23:07+08:00 Create Date : 2012:04:17 19:51:14+08:00 Metadata Date : 2012:05:04 11:23:07+08:00 Format : application/pdf Title : Microsoft Word - USER manual.doc Creator : zmp Producer : Acrobat Distiller 8.1.0 (Windows) Document ID : uuid:02fab69d-9355-4a30-9eae-86c67a43d015 Instance ID : uuid:9f4d733b-11a1-4a84-b17f-51a4a9ea12b9 Page Count : 21 Author : zmpEXIF Metadata provided by EXIF.tools