Computime CTL3579 ZigBee Module User Manual

Computime Limited ZigBee Module

user manual

Download: Computime CTL3579 ZigBee Module User Manual
Mirror Download [FCC.gov]Computime CTL3579 ZigBee Module User Manual
Document ID1681559
Application IDygHTpf7pFFcvFyulLz4xWg==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize18.08kB (226053 bits)
Date Submitted2012-04-22 00:00:00
Date Available2012-04-22 00:00:00
Creation Date2012-04-11 17:11:57
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2012-04-19 21:35:50
Document TitleMicrosoft Word - user manual.doc
Document CreatorPScript5.dll Version 5.2
Document Author: zmp

ZigBee-Ready RF Transceiver Module
(IEEE 802.15.4)
CTL3576/7/8/9
The reproduction of this datasheet is NOT allowed without approval of Computime Limited. All information and data
contained in this datasheet are subject to change without notice. This publication supersedes and replaces all information
previously supplied. Computime has no responsibility to the consequence of using the information described in this
document.
Copyright © 2011 Computime Limited. All rights reserved.
Rev. 2
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
Revision
Rev.
Date
(DD-MM-YYYY)
18-09-2011
History
First Release
Copyright © 2011 Computime Limited. All rights reserved.
Rev. 2
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
Table of Contents
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
General Description...................................................................................................................................... 0
Applications .................................................................................................................................................. 0
Features ....................................................................................................................................................... 0
Absolute Maximum Ratings.......................................................................................................................... 1
Recommended Operating Conditions .......................................................................................................... 1
Electrical Specifications................................................................................................................................ 1
Typical application block .............................................................................................................................. 3
Pin Assignment............................................................................................................................................. 3
Pin Description ............................................................................................................................................. 4
Block Diagram......................................................................................................................................... 11
RF Frequency Detail ............................................................................................................................... 12
PCB Layout Recommendations.............................................................................................................. 13
Mechanical Dimensions.......................................................................................................................... 14
Modules Differentia ................................................................................................................................. 15
Copyright © 2011 Computime Limited. All rights reserved.
Rev.2
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
1. General Description
The CTL357x RF Transceiver Module is compact surface mounted Module specially designed for
Ember ZigBee™ protocol stack for wireless networks, EmberZNet, based on IEEE 802.15.4
standard in the 2.4GHz world-wide ISM band. The complete module is only 32.4 x 25.4 x 4.1 mm. It
integrated a 2.4GHz, IEEE 802.15.4-2003 compliant transceiver with a 32-bit network processor
(ARM Cortex-M3 Processor) to run EmberZNet. They contain embedded Flash and integrated RAM
for program and data storage. It utilizes the non-intrusive SIF module for powerful software
debugging and programming of the network processor.
2. Applications
Home
automation &
building control
Home
appliances &
alarms
Monitoring of
remote
systems
Security
systems &
lighting
controls
Sensor data
capture in
embedded
networks
3. Features
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Complete ZigBee-ready module with integrated PCB antenna
Integrated IEEE 802.15.4 PHY and MAC layer
Non-intrusive debug interface (SIF)
SPI interface for communication and controlled by the Host using the EmberZNet Serial Protocol
(EZSP)
Internal RC oscillator for timer
High performance direct sequence spread spectrum (DSSS) RF transceiver
16 channels in the 2.4 GHz ISM band
On-chip regulator for 2.1-3.6V operation , three sleep low power modes
32-bit ARM® Cortex™-M3 processor
192KB FLASH ROM and 12KB RAM(EM357 internal) ,8Mb off chip Flash memory
(CTL3577&CTL3579)
+20dBm transmission power
-98dBm excellent reception sensitivity. (Boost mode -101dBm)
Small footprint: 32.4 x 25.4 x 4.1 mm
Optional MMCX connector for external antenna
Extremely low Deep Sleep Current.
Copyright © 2011 Computime Limited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
4. Absolute Maximum Ratings
Parameter
Test Conditions
Regulator input voltage (VDD_PADS)
RF Input Power
(for max level for correct packet reception)
Min.
-0.3
RX signal into a lossless balun
Max.
Unit
+3.6
+15
dBm
Voltage on any GPIO (PA[7:0], PB[7:0],
PC[7:0]),
SWCLK,
nRESET,
VREG_OUT
-0.3
VDD_PADS
+0.3
Voltage on any GPIO pin (PA4, PA5, PB5,
PB6, PB7, PC1), when used as an input to the
general purpose ADC with the low voltage
range selected
-0.3
2.0
Voltage on OSCA, OSCB, NC
-0.3
VDD_PADSA
+0.3
Storage temperature
-40
+140
°C
5. Recommended Operating Conditions
Parameter
Test Conditions
Min.
Typ.
2.7
Regulator input voltage (VDD_PADS)
Unit
3.6
①
Operating temperature range
Max.
+70
°C
Max
Unit
2.5
GHz
6. Electrical Specifications
T=25℃, VCC = 3.0V, Fo =2450MHZ, if nothing else stated.
Parameter
Condition / Note
Min
Operating frequency
Programmable in 5MHz steps, 5 MHz
steps for IEEE 802.15.4 compliance
2.4
Number of channels
For IEEE 802.15.4 compliance
16
Channel spacing
For IEEE 802.15.4 compliance
MHz
50
Ohm
Input/output impedance
Frequency stability
Transmit power
①
Programmable from firmware
-15
Typ.
+/-40
ppm
+20
dBm
Operationg temperature range from -40 to 85°C for module CTL3576 and CTL3578.
Copyright © 2011 Computime Limited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
Parameter
Condition / Note
Min
Sensitivity
PER = 1% PER, 20byte packet
defined by IEEE 802.15.4 Boost
mode
-98
dBm
Adjacent channel rejection +/-5 MHz
IEEE 802.15.4 compliance at -82
dBm
35/35
dB
Adjacent channel rejection +/-10 MHz
IEEE 802.15.4 compliance at -82
dBm
40/40
dB
-6
dB
Co-channel rejection
Supply voltage
Typ.
2.7
Max
3.6
Unit
Max RX sensitivity (normal mode)
28
mA
Max RX sensitivity (boost mode)
30
mA
Current consumption,
TX mode
190
mA
Deep sleep current
10②
Current consumption,
RX mode
Flash Memory
192
MCU clock frequency
24
②
③
μA
③
KB
MHz
Deep sleep current less than 5 uA for module CTL3576 and CTL3578.
Only CTL3577 and CTL3579 have 8Mb off chip flash memory on the RF module.
Copyright © 2011 Computime Limited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
7. Typical application block
HOST
MCU
VDD_PADS=2.7- 3.6V
32.768kHz
NREST
PTI_EN
Debug and
PTI-DATA
programming
SIF_CLK
interface
SIF-MISO
8Mb flash
CTL357x
RF Module
24MHz
SIF-MOSI
NSIF LOAD
LINK_ACTIVITY
Figure 1: Example of application circuit
8. Pin Assignment
Figure 2: CTL357x pin assignment
Copyright © 2011 Computime Limited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
9. Pin Description
Pin#
CTL3576
CTL3577
CTL3578
CTL3579
Direction
JTCK
JTCK
JTCK
JTCK
SWCLK
SWCLK
SWCLK
SWCLK
I/O
Serial Wire Clock input/output
with debugger
PC2
PC2
PC2
PC2
I/O
Digital
I/O
Enable
GPIO_DBGCFG[5]
JTDO
JTDO
JTDO
JTDO
JTAG data out to debugger
SWO
SWO
SWO
SWO
Serial
Wire
Output
asynchronous trace output to
PC3
PC3
PC3
PC3
I/O
Digital
I/O
Enable
GPIO_DBGCFG[5]
JTDI
JTDI
JTDI
JTDI
PC4
PC4
PC4
PC4
I/O
JTMS
JTMS
JTMS
JTMS
SWDIO
SWDIO
SWDIO
SWDIO
I/O
Serial Wire bidirectional data
to/from debugger
PC0
PC0
PC0
PC0
I/O High
current
Digital I/O Either Enable with
GPIO_DBGCFG[5]
JRST
JRST
JRST
JRST
IRQD
IRQD
IRQD
IRQD
JTAG
clock
debugger
from
with
with
JTAG data in from debugger
Digital I/O Either Enable with
GPIO_DBGCFG[5]
JTAG mode
debugger
select
Default
external
source D
Synchronous CPU trace data
bit 1
PB7
PB7
PB7
I/OHigh
current
Digital I/O
ADC2
ADC2
ADC2
ADC2
Analog
ADC input 2
input
from
JTAG
reset
debugger
PB7
Copyright © 2011 Computime Limited. All rights reserved.
input
TRACEDATA1 TRACEDATA1 TRACEDATA1 TRACEDATA1
Description
from
interrupt
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
Pin#
IRQC
IRQC
IRQC
IRQC
Default
external
source C
interrupt
TIM1C2
TIM1C2
TIM1C2
TIM1C2
Timer 1 channel 2 output
TIM1C2
TIM1C2
TIM1C2
TIM1C2
Timer 1 channel 2 input
PB6
PB6
PB6
PB6
I/O High
current
Digital I/O
ADC1
ADC1
ADC1
ADC1
Analog
ADC input 1
IRQB
IRQB
IRQB
IRQB
External interrupt source B
TIM1C1
TIM1C1
TIM1C1
TIM1C1
Timer 1 channel 1 output
TIM1C1
TIM1C1
TIM1C1
TIM1C1
Timer 1 channel 1 input
CTL3576
CTL3577
CTL3578
CTL3579
Direction
Description
PA7
PA7
PA7
PA7
I/O High
current
Digital I/O Disable REG_EN
with GPIO_DBGCFG [4]
TIM1C4
TIM1C4
TIM1C4
TIM1C4
Timer 1 channel 4 output
TIM1C4
TIM1C4
TIM1C4
TIM1C4
Timer 1 channel 4 input
REG_EN
REG_EN
REG_EN
REG_EN
External regulator open drain
output
PC1
PC1
PC1
PC1
I/O
Digital I/O
ADC3
ADC3
ADC3
ADC3
SWO
SWO
SWO
SWO
Analog
ADC input 3
TRACEDATA0 TRACEDATA0 TRACEDATA0 TRACEDATA0
10
GND
GND
GND
Serial
Wire
Output
asynchronous trace output to
Synchronous CPU trace data
bit 0
GND
Copyright © 2011 Computime Limited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
Digital I/O
PB3
PB3
PB3
PB3
I/O
TIM2C3
TIM2C3
TIM2C3
TIM2C3
Timer 2 channel 3 output
TIM2C3
TIM2C3
TIM2C3
TIM2C3
Timer 2 channel 3 input
SC1nCTS
SC1nCTS
SC1nCTS
SC1nCTS
UART CTS handshake of
Serial Controller 1
SC1SCLK
SC1SCLK
SC1SCLK
SC1SCLK
SPI master clock of serial
Controller 1
SC1SCLK
SC1SCLK
SC1SCLK
SC1SCLK
SPI slave clock of serial
Controller 1
GND
GND
GND
GND
PC6
PC6
PC6
PC6
I/O
Digital I/O
OSC32B
OSC32B
I/O
32.768KHz crystal oscillator
Inverted TX_ACTIVE signal
11
12
13
NTX_ACTIVE
NTX_ACTIVE
NTX_ACTIVE
NTX_ACTIVE
PC7
PC7
PC7
PC7
I/O
OSC32A
OSC32A
I/O
14
OSC32_EXT
OSC32_EXT
OSC32_EXT
OSC32_EXT
15
GND
GND
GND
GND
16
VDD_PADS
VDD_PADS
VDD_PADS
VDD_PADS
Power
17
nRESET
nRESET
nRESET
nRESET
Pin#
18
CTL3576
CTL3577
CTL3578
CTL3579
Direction
PA0
PA0
PA0
PA0
I/O
Copyright © 2011 Computime Limited. All rights reserved.
Digital I/O
32.768KHz crystal oscillator
Digital 32.768KHz clock input
source
Pads supply(2.1-3.6V)
Active low chip reset(internal
pull-up)
Description
Digital I/O
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
TIM2C1
TIM2C1
TIM2C1
TIM2C1
Timer 2 channel 1 output
TIM2C1
TIM2C1
TIM2C1
TIM2C1
Timer 2 channel 1 input
SC2MOSI
SC2MOSI
SC2MOSI
SC2MOSI
SPI master data out of serial controller
SC2MOSI
SC2MOSI
SC2MOSI
SC2MOSI
SPI slave data in of serial controller 2
SI
Serial data in fot the 8Mb flash④
SI
19
PA1
PA1
PA1
I/O
TIM2C3
TIM2C3
TIM2C3
TIM2C3
Timer 2 channel 3 output
TIM2C3
TIM2C3
TIM2C3
TIM2C3
Timer 2 channel 3 input
SC2SDA
SC2SDA
SC2SDA
SC2SDA
I/O
TWI data of serial controller 2
SC2MISO
SC2MISO
SC2MISO
SC2MISO
SPI slave data out of serial controller 2
SC2MISO
SC2MISO
SC2MISO
SC2MISO
SPI master data in of serial controller 2
SO
Serial data out of the 8Mb flash
SO
20
Digital I/O
PA1
Digital I/O
PA2
PA2
PA2
PA2
I/O
TIM2C4
TIM2C4
TIM2C4
TIM2C4
Timer 2 channel 4 output
TIM2C4
TIM2C4
TIM2C4
TIM2C4
Timer 2 channel 4 input
SC2SCL
SC2SCL
SC2SCL
SC2SCL
I/O
TWI clock of serial controller 2
SC2SCLK
SC2SCLK
SC2SCLK
SC2SCLK
SPI master clock of serial controller 2
④
The SI,SO,SCK and CE# on the module pin18,19,20 and 23 are connected to the off chip 8Mbit SPI Serial
Flash(SST25VF080B).Details information about the flash memory ,refers to its datasheet. It applys to the module
CTL3577 and CTL3579.
Copyright © 2011 Computime Limited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
SC2SCLK
SC2SCLK
SC2SCLK
SC2SCLK
SPI slave clock of serial controller 2
SCK
Clock in for the 8Mb flash
SCK
21
22
Pin#
PA6
PA6
PA6
PA6
I/O High
current
TIM1C3
TIM1C3
TIM1C3
TIM1C3
Timer 1 channel 3 output
TIM1C3
TIM1C3
TIM1C3
TIM1C3
Timer 1 channel 3 input
PB4
PB4
PB4
PB4
I/O
TIM2C4
TIM2C4
TIM2C4
TIM2C4
Timer 2 channel 4 output
TIM2C4
TIM2C4
TIM2C4
TIM2C4
Timer 2 channel 4 input
SC1nRTS
SC1nRTS
SC1nRTS
SC1nRTS
UART RTS
controller 1
SC1nSSEL SC1nSSEL SC1nSSEL SC1nSSEL
SPI slave select of serial controller 1
Digital I/O
Digital I/O
of
serial
CTL3576
CTL3577
CTL3578
CTL3579
Direction
PA3
PA3
PA3
PA3
I/O
SC2Nssel
SC2Nssel
SC2Nssel
SC2Nssel
SPI slave select of serial
controller 2
TRACECLK
TRACECLK
TRACECLK
TRACECLK
Synchronous
clock
TIM2C2
TIM2C2
TIM2C2
TIM2C2
Timer 2 channel 2 output
TIM2C2
TIM2C2
TIM2C2
TIM2C2
Timer 2 channel 2 input
CE#
Chip Enable for the 8Mb flash
PA4
I/O
23
CE#
24
handshake
PA4
PA4
PA4
Copyright © 2011 Computime Limited. All rights reserved.
Description
Digital I/O
CPU
trace
Digital I/O
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
ADC4
ADC4
ADC4
ADC4
Analog
PTI_EN
PTI_EN
PTI_EN
PTI_EN
Frame signal of packet trace
interface
Synchronous CPU trace data
bit 2
TRACEDATA2 TRACEDATA2 TRACEDATA2 TRACEDATA2
25
26
Pin#
27
ADC input 4
Digital I/O
PA5
PA5
PA5
PA5
I/O
ADC5
ADC5
ADC5
ADC5
Analog
PTI_DATA
PTI_DATA
PTI_DATA
PTI_DATA
Data signal of packet trace
interface
NBOOTMODE NBOOTMODE NBOOTMODE NBOOTMODE
Embedded serial bootloader
activation out of reset
TRACEDATA3 TRACEDATA3 TRACEDATA3 TRACEDATA3
Synchronous CPU trace data
bit 3
ADC input 5
Digital I/O
PB1
PB1
PB1
PB1
I/O
SC1MISO
SC1MISO
SC1MISO
SC1MISO
SPI slave data out of serial
controller 1
SC1MOSI
SC1MOSI
SC1MOSI
SC1MOSI
SPI master data out of serial
controller 1
SC1SDA
SC1SDA
SC1SDA
SC1SDA
I/O
TWI data of serial controller 1
SC1TXD
SC1TXD
SC1TXD
SC1TXD
UART transmit data of serial
controller 1
TIM2C1
TIM2C1
TIM2C1
TIM2C1
Timer 2 channel 1 output
TIM2C1
TIM2C1
TIM2C1
TIM2C1
Timer 2 channel 1 input
CTL3576
CTL3577
CTL3578
CTL3579
Direction
PB2
PB2
PB2
PB2
I/O
Copyright © 2011 Computime Limited. All rights reserved.
Description
Digital I/O
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
SC1MISO
SC1MISO
SC1MISO
SC1MISO
SPI master data in of serial controller 1
SC1MOSI
SC1MOSI
SC1MOSI
SC1MOSI
SPI slave data in of serial controller 1
SC1SCL
SC1SCL
SC1SCL
SC1SCL
I/O
SC1RXD
SC1RXD
SC1RXD
SC1RXD
UART receive data of serial controller
TIM2C2
TIM2C2
TIM2C2
TIM2C2
Timer 2 channel 2 output
TIM2C2
TIM2C2
TIM2C2
TIM2C2
Timer 2 channel 2 input
PB5
PB5
PB5
PB5
I/O
ADC0
ADC0
ADC0
ADC0
Analog
TIM2CLK
TIM2CLK
TIM2CLK
TIM2CLK
Timer 2 external clock input
TIM1CLK
TIM1CLK
TIM1CLK
TIM1CLK
Timer 1 external clock mask input
PB0
PB0
PB0
PB0
I/O
VREF
VREF
VREF
VREF
Analog O
ADC reference output
VREF
VREF
VREF
VREF
Analog I
ADC reference input
IRQA
IRQA
IRQA
IRQA
External interrupt source A
Synchronous CPU trace clock
TWI clock of serial controller 1
Digital I/O
ADC input 0
28
29
TRACECLK TRACECLK TRACECLK TRACECLK
Digital I/O
TIM1CLK
TIM1CLK
TIM1CLK
TIM1CLK
Timer 1 external clock input
TIM2MSK
TIM2MSK
TIM2MSK
TIM2MSK
Timer 2 external clock mask input
Copyright © 2011 Computime Limited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
10. Block Diagram
2.7 – 3.6V
PCB antenna
32 Bit ARM Processor
24MHz
User
Application
TO HOST
MCU
IEEE 802.15.4
RF Transceiver
TM
Zigbee
Network
FEM
IEEE 802.15.4
MAC
CTL3576
2.7 – 3.6V
PCB antenna
32 Bit ARM Processor
User
Application
TO HOST
MCU
8Mb flash
24MHz
FEM
TM
Zigbee
Network
IEEE 802.15.4
RF Transceiver
IEEE 802.15.4
MAC
CTL3577
Copyright © 2011 Computime Limited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
2.7 – 3.6V
PCB antenna
32 Bit ARM Processor
24MHz
User
Application
TO HOST
MCU
32.768kHz
FEM
ZigbeeTM
Network
IEEE 802.15.4
RF Transceiver
IEEE 802.15.4
MAC
CTL3578
2.7 – 3.6V
PCB antenna
32 Bit ARM Processor
8Mb flash
32.768kHz
User
Application
TO HOST
MCU
24MHz
FEM
TM
Zigbee
Network
IEEE 802.15.4
RF Transceiver
IEEE 802.15.4
MAC
CTL3579
Figure 3: Block Diagram
11. RF Frequency Detail
The following table shows the RF channels as defined by the IEEE 802.15.4 standard.
RF channel
Frequency
11
2405MHz
12
2410MHz
13
2415MHz
14
2420MHz
Copyright © 2011 Computime Limited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
15
2425MHz
16
2430MHz
17
2435MHz
18
2440MHz
19
2445MHz
20
2450MHz
21
2455MHz
22
2460MHz
23
2465MHz
24
2470MHz
25
2475MHz
26
2480MHz
Note: the output power of EM357 should be configured lower than -15dBm for 2480M channel
to Comply FCC requirement.
The use of RF frequencies and maximum allowed RF power should according to different national
regulations. The CTL3576 is complying with the applicable regulations for the world wide 2.4GHz
ISM band.
12. PCB Layout Recommendations
Please reference Mechanical Dimensions shown in next section for PCB layout.
The area underneath the module should be covered with solder mask in order to prevent short
circuit on the test pads on the back side of the module. A solid ground plane under the module is
preferred.
As the module integrated with onboard PCB trace antenna, the mounting position of the module will
have great impact on the RF performance. There should not be any trace, ground plane or metal
part underneath or nearby the area of the onboard PCB trace antenna. The figure below shows an
example how the module positioned on the mother PCB.
Figure 4: A recommended placement of the module on a main PCB
Copyright © 2011 Computime Limited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
13. Mechanical Dimensions
Figure 5: Mechanical Dimensions of CTL3576
.8
Pin 1
Pin 11
For further details on the SoC transceiver (Ember EM357), please consult the data sheet at
http://www.ember.com
Copyright © 2011 Computime Limited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
14. Modules Differentia
Computime Model No.
CTL3576
CTL3577
CTL3578
CTL3579
P.A.
32kHz Crystal
Copyright © 2011 Computime Limited. All rights reserved.
8Mbit Flash Memory
Rev. 1
FCC STATEMENT:
1. This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The modular can be installed or integrated in mobile or fix devices only. This modular cannot
be installed in any portable device, for example, USB dongle like transmitters is forbidden.
This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This modular must be installed and operated with a minimum
distance of 20 cm between the radiator and user body.
If the FCC identification number is not visible when the module is installed inside another
device, then the outside of the device into which the module is installed must also display a
label referring to the enclosed module. This exterior label can use wording such as the
following: “Contains Transmitter Module FCC ID: DI2-CTL3579
when the module is installed inside another device, the user manual of this device must
contain below warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
The devices must be installed and used in strict accordance with the manufacturer's
instructions as described in the user documentation that comes with the product.
IC STATEMENT
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
IC RF warning statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
If the IC identification number is not visible when the module is installed inside another
device, then the outside of the device into which the module is installed must also display a
label referring to the enclosed module. This exterior label can use wording such as the
following: “Contains Transmitter Module IC: 1700D-CTL3579
This radio transmitter (identify the device by certification number, or model number if
Category II) has been approved by Industry Canada to operate with the antenna types listed
below with the maximum permissible gain and required antenna impedance for each antenna
type indicated. Antenna types not included in this list, having a gain greater than the maximum
gain indicated for that type, are strictly prohibited for use with this device.
IC: 1700D-CTL3579
Model No.:CTL3579, CTL3576, CTL3577, CTL3578
Antenna type:intergal (SMT)
Antenna gain:-0.32dBi
Antenna impedance: 50ohm
ZigBee- Ready RF Transceiver Module CTL3576/7/8/9
Contact information
COMPUTIME CORPORATE HQ
17/F, Great Eagle Centre,
23 Harbour Road, Wanchai,
Tel: +852.2260.0300
Fax: +852.2790.3996
e-mail: hq@computime.com
COMPUTIME NORTH AMERICA HQ,
4700 Duke Dr.
Suite 200
Mason OH 45040
USA
Tel: +1(513).398.2579
Fax: +1(513).754.8955
e-mail: na@computime.com
CINCINNATI WIRELESS SOLUTIONS LTD
4700 Duke Dr.
Suite 200
Mason OH 45040
USA
Tel: +1(513).754.8935
Fax: +1(513).754.8955
e-mail: ctws@computime.com
COMPUTIME JAPAN
3-18-9 Roppongi Minatoku,
Tokyo 106-0032,
Japan
Tel: (03).3583.8411
Fax: (03).3583.3799
e-mail: cj@computime.com
About Computime
Founded in 1974, Computime is a global technology, brand and manufacturing company
providing innovative automation and control solutions to customers in commercial, industrial
and consumer markets.
The Company provides technologies and products that save energy and make people's
lives more productive and comfortable.
Copyright © 2011 Computime Limited. All rights reserved.
Rev. 1

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2012:04:19 21:35:50+08:00
Create Date                     : 2012:04:11 17:11:57+08:00
Metadata Date                   : 2012:04:19 21:35:50+08:00
Format                          : application/pdf
Title                           : Microsoft Word - user manual.doc
Creator                         : zmp
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:c27c9984-6d62-4bbc-895f-6d41a79641cf
Instance ID                     : uuid:e0cf2fc9-de08-401c-a459-36de4d9e05c3
Page Count                      : 22
Author                          : zmp
EXIF Metadata provided by EXIF.tools
FCC ID Filing: DI2-CTL3579

Navigation menu