Comtrend CT-5364A 11N Wireless ADSL2+Router User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1288281
Application ID	nTNCL+4/MT1Eh8k6TXWcnA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	175.17kB (2189605 bits)
Date Submitted	2010-05-30 00:00:00
Date Available	2010-05-30 00:00:00
Creation Date	2010-05-18 12:03:25
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2010-05-18 12:03:25
Document Title	User manual

CT-5364A
802.11n ADSL2+ Router
User Manual
Version A2.0, May 17, 2010
261091-007
Preface
This manual provides information related to the installation and operation of this
device. The individual reading this manual is presumed to have a basic
understanding of telecommunications terminology and concepts.
If you find the product to be inoperable or malfunctioning, please contact technical
support for immediate service by email at INT-support@comtrend.com
For product update, new product release, manual revision, or software upgrades,
please visit our website at http://www.comtrend.com
Important Safety Instructions
With reference to unpacking, installation, use, and maintenance of your electronic
device, the following basic guidelines are recommended:
•
•
•
•
•
•
Do not use or install this product near water, to avoid fire or shock hazard. For
example, near a bathtub, kitchen sink or laundry tub, or near a swimming pool.
Also, do not expose the equipment to rain or damp areas (e.g. a wet basement).
Do not connect the power supply cord on elevated surfaces. Allow it to lie freely.
There should be no obstructions in its path and no heavy items should be placed
on the cord. In addition, do not walk on, step on, or mistreat the cord.
Use only the power cord and adapter that are shipped with this device.
To safeguard the equipment against overheating, make sure that all openings in
the unit that offer exposure to air are not blocked.
Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightening. Also, do not use
the telephone to report a gas leak in the vicinity of the leak.
Never install telephone wiring during stormy weather conditions.
CAUTION:
„
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunication line cord.
„
Always disconnect all telephone lines from the wall outlet before servicing
or disassembling this equipment.
WARNING
„
Disconnect the power line from the device before servicing.
„
Power supply specifications are clearly stated in Appendix C.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Notice: The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements,
no change to the antenna or the device is permitted. Any change to the antenna or
the device could result in the device exceeding the RF exposure requirements and
void user’s authority to operate the device.
The Federal Communication Commission Radio Frequency Interference Statement
includes the following paragraph:
The equipment has been tested and found to comply with the limits for a Class
Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction, may cause harmful
interference to radio communication. However, there is no grantee that interference
will not occur in a particular installation. If this equipment dose cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
The user should not modify or change this equipment without written approval form
Comtrend Corporation .Modification could void authority to use this equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements,
the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter. No change to the antenna or
the device is permitted. Any change to the antenna or the device could result in the
device exceeding the RF exposure requirements and void user’s authority to operate
the device.
Copyright
Copyright©2010 Comtrend Corporation. All rights reserved. The information
contained herein is proprietary to Comtrend Corporation. No part of this document
may be translated, transcribed, reproduced, in any form, or by any means without
prior written consent of Comtrend Corporation.
This program is free software: you can redistribute it and/or modify it under the
terms of the GNU General Public License as published by the Free Software
Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTA ILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
details.
You should have received a copy of the GNU General Public License along with this
program. If not, see http://www.gnu.org/licenses/
NOTE: This document is subject to change without notice.
Protect Our Environment
This symbol indicates that when the equipment has reached the end of
its useful life, it must be taken to a recycling centre and processed
separate from domestic waste.
The cardboard box, the plastic contained in the packaging, and the parts that make
up this router can be recycled in accordance with regionally established regulations.
Never dispose of this electronic equipment along with your household waste; you
may be subject to penalties or sanctions under the law. Instead, please be
responsible and ask for disposal instructions from your local government.
Table of Contents
CHAPTER 1 INTRODUCTION .......................................................................................................... 6
1.1 FEATURES ....................................................................................................................................... 6
1.2 APPLICATION ................................................................................................................................... 7
CHAPTER 2 INSTALLATION ............................................................................................................ 8
2.1 HARDWARE SETUP .......................................................................................................................... 8
2.2 LED INDICATORS .......................................................................................................................... 10
CHAPTER 3 WEB USER INTERFACE ............................................................................................11
3.1 DEFAULT SETTINGS ........................................................................................................................11
3.2 IP CONFIGURATION ....................................................................................................................... 12
3.3 LOGIN PROCEDURE ....................................................................................................................... 14
CHAPTER 4 QUICK SETUP............................................................................................................. 16
4.1 AUTO QUICK SETUP ...................................................................................................................... 17
4.2 MANUAL QUICK SETUP ................................................................................................................. 18
4.2.1
PPP over ATM (PPPoA) and PPP over Ethernet (PPPoE) ........................................... 20
4.2.2
MAC Encapsulation Routing (MER).............................................................................. 25
4.2.3
IP Over ATM .................................................................................................................. 29
4.2.4
Bridging ......................................................................................................................... 32
CHAPTER 5 DEVICE INFORMATION .......................................................................................... 35
5.1 WAN............................................................................................................................................. 36
5.2 STATISTICS .................................................................................................................................... 37
5.2.1
LAN Statistics ................................................................................................................. 37
5.2.2
WAN Statistics ................................................................................................................ 38
5.2.3
ATM Statistics ................................................................................................................ 39
5.2.4
xDSL Statistics ............................................................................................................... 41
5.3 ROUTE .......................................................................................................................................... 44
5.4 ARP .............................................................................................................................................. 45
5.5 DHCP........................................................................................................................................... 45
CHAPTER 6 ADVANCED SETUP .................................................................................................... 46
6.1 WAN............................................................................................................................................. 46
6.1.1
VLAN Mux...................................................................................................................... 47
6.1.2
MSP................................................................................................................................ 49
6.2 LAN ............................................................................................................................................. 52
6.3 NAT.............................................................................................................................................. 55
6.3.1
Virtual Servers................................................................................................................ 55
6.3.2
Port Triggering .............................................................................................................. 56
6.3.3
DMZ Host....................................................................................................................... 57
6.3.4
ALG ................................................................................................................................ 58
6.4 SECURITY...................................................................................................................................... 59
6.4.1
IP Filtering..................................................................................................................... 59
6.4.2
MAC Filtering................................................................................................................ 61
6.5 PARENTAL CONTROL ..................................................................................................................... 62
6.5.1
Time of Day Restrictions ................................................................................................ 62
6.5.2
URL Filter ...................................................................................................................... 64
6.6 QUALITY OF SERVICE (QOS) ......................................................................................................... 65
6.6.1
Queue Management Configuration................................................................................ 65
6.6.2
Queue Configuration...................................................................................................... 65
6.6.3
QoS Classification.......................................................................................................... 67
6.7 ROUTING ....................................................................................................................................... 69
6.7.1
Default Gateway ............................................................................................................ 69
6.7.2
Static Route .................................................................................................................... 70
6.7.3
RIP ................................................................................................................................. 71
6.8 DNS.............................................................................................................................................. 71
6.8.1
DNS Server..................................................................................................................... 71
6.8.2
Dynamic DNS................................................................................................................. 72
6.9 DSL .............................................................................................................................................. 73
6.10 PRINT SERVER ............................................................................................................................. 74
6.11 INTERFACE GROUPING ................................................................................................................ 75
6.12 IP SEC ......................................................................................................................................... 77
6.13 CERTIFICATE ............................................................................................................................... 80
6.13.1 Local .............................................................................................................................. 80
6.13.2 Trusted CA ..................................................................................................................... 82
CHAPTER 7 WIRELESS ................................................................................................................... 83
7.1 BASIC ............................................................................................................................................ 83
7.2 SECURITY...................................................................................................................................... 85
7.2.1
WPS................................................................................................................................ 87
7.3 MAC FILTER ................................................................................................................................. 92
7.4 WIRELESS BRIDGE ........................................................................................................................ 93
7.5 ADVANCED .................................................................................................................................... 94
7.6 STATION INFO ................................................................................................................................ 96
CHAPTER 8 DIAGNOSTICS ............................................................................................................ 98
8.1 DIAGNOSTICS ................................................................................................................................ 98
CHAPTER 9 MANAGEMENT.......................................................................................................... 99
9.1 SETTINGS ...................................................................................................................................... 99
9.1.1
Backup Settings .............................................................................................................. 99
9.1.2
Update Settings .............................................................................................................. 99
9.1.3
Restore Default............................................................................................................. 100
9.2 SYSTEM LOG ............................................................................................................................... 101
9.3 SNMP AGENT ............................................................................................................................. 103
9.4 TR-069 CLIENT........................................................................................................................... 103
9.5 INTERNET TIME ........................................................................................................................... 105
9.6 ACCESS CONTROL ....................................................................................................................... 106
9.6.1
Services ........................................................................................................................ 106
9.6.2
IP Addresses................................................................................................................. 107
9.6.3
Passwords .................................................................................................................... 108
9.7 UPDATE SOFTWARE ..................................................................................................................... 109
9.8 REBOOT .......................................................................................................................................110
APPENDIX A - FIREWALL.............................................................................................................. 111
APPENDIX B - PIN ASSIGNMENTS ..............................................................................................114
APPENDIX C - SPECIFICATIONS .................................................................................................115
APPENDIX D - SSH CLIENT...........................................................................................................117
APPENDIX E - PRINTER SERVER ................................................................................................118
Chapter 1 Introduction
The CT-5364A 802.11n ADSL2+ Router provides wired and wireless access for
high-bandwidth applications in the home or office. It includes one ADSL port and
five 10/100 ase-T Fast Ethernet ports, with one Ethernet port assigned to the
Ethernet WAN and the other four supporting LAN traffic. An added US host port
supports printers. The front and back panels are TR-068 compliant, with colored
panels and LED indicators that make for easy setup and use.
An integrated 802.11n (2x2 MIMO) WLAN Access Point supports faster connections
(up to 270Mbps) and increased range compared with 802.11b or 802.11g protocols,
without sacrificing compatibility with these older standards. A WPS (Wi-Fi Protected
Setup) button is included for easy and secure wireless network setup. Security
features include 64/128 bit WEP and WPA/WPA2 encryption, firewall and VPN.
1.1 Features
•
Printer Server through US
•
host
•
2x2 MIMO wireless antennas
Ethernet WAN or ADSL access
•
802.11b/g backward-compatible
•
Auto PVC configuration, up to 16 VCs
•
Wireless Distribution System (WDS)
•
DHCP Client/Server/Relay
•
Wi-Fi Protected Setup (WPS)
•
Dynamic IP assignment
•
Strong wireless security encryption
•
Static and RIP v1/v2 routing
•
WPA/WPA2 and 802.1x
•
DNS Proxy/Relay
•
Supports remote administration
•
Per-VC packet level QoS
•
TR-069/TR-098/TR-111 protocols
•
IP/TCP/UDP QoS
•
Configuration backup and restoration
•
NAT/PAT
•
Automatic firmware upgrade
•
IP/MAC address filtering
•
FTP/TFTP server
•
Parental Control
•
RADIUS client
•
UPnP
•
Web-based management
•
IGMP Proxy
•
Embedded SNMP agent
•
WMM
•
TR-068 compliant color connectors
•
Integrated 802.11n AP
1.2 Application
The following diagram depicts the application of the CT-5364A.
Chapter 2 Installation
2.1 Hardware Setup
Follow the instructions below to complete the hardware setup.
BACK PANEL
The figure below shows the back panel of the device.
ADSL PORT
Connect the ADSL line to the ADSL port with a RJ-11 (telephone) cable.
LAN PORTS
Use RJ-45 cable to connect up to four network devices. These ports are
auto-sensing MDI/X and either straight-through or crossover cable can be used.
ETH WAN PORT
Use RJ45 straight through or crossover MDI/X cable to connect to Ethernet WAN.
USB HOST PORT
The high-speed US 2.0 host connection connects compatible US
This firmware release supports most printers.
•
devices.
Consult Appendix E for generic printer setup.
POWER ON
Press the power button to the OFF position (OUT). Connect the power adapter to
the power port. Attach the power adapter to a wall outlet or other AC source. Press
the power button to the ON position (IN). If the Power LED displays as expected
(see section 2.2 LED Indicators) then the CT-5364A is ready for use.
Caution 1: If the device fails to power up, or it malfunctions, first verify that the
power cords are connected securely and then power it on again. If the
problem persists, contact technical support.
Caution 2:
efore servicing or disassembling this equipment, disconnect all power
cords and telephone lines from their outlets.
SIDE PANEL
The figure below shows the right-side panel of the device.
WPS BUTTON
Press this button to begin searching for WPS clients. These clients must also enable
WPS push button mode. When WPS is available the WPS LED will be ON.
Reset Button
Restore the default parameters of the device by pressing the Reset button for 5 to
10 seconds. After the device has rebooted successfully, the front panel should
display as expected (see section 2.2 LED Indicators for details).
NOTE:
If pressed down for more than 20 seconds, the CT-5364A will go into a
firmware update state (CFE boot mode). The firmware can then be
updated using an Internet browser pointed to the default IP address.
2.2 LED Indicators
The front panel LED indicators are shown below and explained in the following table.
This information can be used to check the status of the device and its connections.
LED
Color
Green
Mode
On
Off
POWER
Red
LAN 4X-1X
Green
WPS
Green
Wireless
Green
ETH WAN
Green
ADSL
Green
Green
On
On
Off
link
On
Off
link
On
Off
link
On
Off
link
On
Off
link
On
Off
INTERNET
link
Red
On
Function
The device is powered up.
The device is powered down.
POST (Power On Self Test) failure or other
malfunction. A malfunction is any error of internal
sequence or state that will prevent the device from
connecting to the DSLAM or passing customer data.
An Ethernet Link is established.
An Ethernet Link is not established.
Data transmitting or receiving over LAN.
WPS enabled.
WPS disenabled.
The router is searching for WPS clients.
The wireless module is ready.
(i.e. installed and enabled).
The wireless module is not ready.
(i.e. either not installed or disabled).
Data transmitting or receiving over WLAN.
An Ethernet WAN Link is established.
An Ethernet WAN Link is not established.
Data transmitting or receiving over Ethernet WAN.
The ADSL link is established.
The ADSL link is not established.
The ADSL link is training.
IP connected and no traffic detected. If an IP or
PPPoE session is dropped due to an idle timeout, the
light will remain green if an ADSL connection is still
present.
Modem power off, modem in bridged mode or ADSL
connection not present. In addition, if an IP or
PPPoE session is dropped for any reason, other than
an idle timeout, the light is turned off.
IP connected and IP Traffic is passing thru the device
(either direction)
Device attempted to become IP connected and failed
(no DHCP response, no PPPoE response, PPPoE
authentication failed, no IP address from IPCP, etc.)
10
Chapter 3 Web User Interface
This section describes how to access the device via the web user interface (WUI)
using an Internet browser such as Internet Explorer (version 5.0 and later).
3.1 Default Settings
The factory default settings of this device are summarized below.
•
•
•
•
LAN IP address: 192.168.1.1
LAN subnet mask: 255.255.255.0
Administrative access (username: root , password: 12345)
User access (username: user, password: user)
•
•
Remote WAN access: enabled
Remote (WAN) access (username: support, password: support)
•
•
WLAN access: enabled
Service Set Identifier (SSID): Comtrend_xxxx,
where xxxx are the last-four digits of the MAC address of the wireless interface.
Technical Note
During power on, the device initializes all settings to default values. It will then
read the configuration profile from the permanent storage section of flash memory.
The default attributes are overwritten when identical attributes with different values
are configured. The configuration profile in permanent storage can be created via
the web user interface or telnet user interface, or other management protocols.
The factory default configuration can be restored either by pushing the reset button
for more than five seconds until the power indicates LED blinking or by clicking the
Restore Default Configuration option in the Restore Settings screen.
11
3.2 IP Configuration
DHCP MODE
When the CT-5364A powers up, the onboard DHCP server will switch on.
The DHCP server issues and reserves IP addresses for LAN devices, such as your PC.
To obtain an IP address from the DCHP server, follow the steps provided below.
NOTE:
The following procedure assumes you are running Windows XP.
However, the general steps involved are similar for most operating
systems (OS). Check your OS support documentation for further details.
STEP 1: From the Network Connections window, open Local Area Connection (You
may also access this screen by double-clicking the Local Area Connection
icon on your taskbar). Click the Properties button.
STEP 2: Select Internet Protocol (TCP/IP) and click the Properties button.
STEP 3: Select Obtain an IP address automatically as shown below.
STEP 4: Click OK to submit these settings.
If you experience difficulty with DHCP mode, you can try static IP mode instead, as
described on the next page.
12
STATIC IP MODE
In static IP mode, you assign IP settings to your PC manually.
Follow these steps to configure your PC IP address to use subnet 192.168.1.x.
NOTE:
The following procedure assumes you are running Windows XP.
However, the general steps involved are similar for most operating
systems (OS). Check your OS support documentation for further details.
STEP 1: From the Network Connections window, open Local Area Connection (You
may also access this screen by double-clicking the Local Area Connection
icon on your taskbar). Click the Properties button.
STEP 2: Select Internet Protocol (TCP/IP) and click the Properties button.
STEP 3: Change the IP address to the domain of 192.168.1.x (1