Conair WW910F Bluetooth body analysis scale User Manual

Conair Corporation Bluetooth body analysis scale

user manual

Before Using ScalePrecautions for UseCAUTION! Use of this device by persons with any electrical implant such as a heart pacemaker, or by pregnant women, is not recommended. 1. Remove all packaging materials.2.   Remove the isolator tab from the battery compartment – without opening the battery cover at the bottom of the scale, gently pull out the isolator tab. (In case the tab cannot be pulled out, or if the scale display does not work after you have pulled the isolator tab, remove the screw from the battery cover and remove the cover. Gently pull out the isolator tab or any pieces of it that may block the battery contacts. Ensure the batteries are installed correctly. Replace the battery cover and tighten the screw again.) 3.  For best accuracy, place scale on tile or hardwood floor, rather than uneven, flexible or soft flooring (such as carpet).Weight Measurement Only (Using Scale Without App)To measure weight only:1. Tap the scale in standby mode. The whole screen appears.2. Wait about 2 seconds until “0.0” appears.3. Step on the scale and stand still to measure your weight. The scale display will flash for a few seconds and then display weight.4. Step off the scale and it will shut off automatically.Personal Data Setting Mode  (Using Scale Without App)Personal Data Setting Tap the platform firmly to activate the scale. The whole screen will appear. Wait for “0.0” to show, then press the SET button to enter into Personal data setting mode. User 2 will flash. Press the UP or DOWN button to choose user number (user 2 to user 10). Press the SET button to confirm.The scale will now enter the Height setting mode.Height will flash. Press the UP or DOWN button to choose the height. If the scale is set to measure in pounds, the height will display in feet and inches. If it is set to measure in kgs, the height will display in cm. Pressing and holding the UP or DOWN button will advance numbers quickly. Press the SET button to confirm the Height.Congratulations on purchasing this Bluetooth® connected Weight Watchers Scales by Conair™ Body Analysis Monitor! It is designed to work with the free Weight Watchers Scales by Conair™ app to give you an easy-to-use way of tracking your measurements. To download the app, go to the Apple® App Store or Google® store and type “WW Scales by Conair” into the search box. Or, you can go to www.BTScalesByConair.com and download the app there.Once you have downloaded the app to your device, it will walk you through the easy pairing and set-up process with the scale. For more information, frequently asked questions and support, check www.BTScalesByConair.comDid you know?  •  Your scale works as a body analysis monitor even without the app – you do not need a smart device to check your weight, body fat, body water, bone mass, muscle mass or BMI!   •  But you will need a smart device to set goals, track your progress, earn badges, and participate in other fun activities that are only available on the app.  •  If you are a Weight Watchers member, your weight data will automatically sync with your account on the Weight Watchers app; no more need for manual data entries!   •  If you use other health and fitness apps, and would like them to receive data from your scale, the app will sync data to the Health app (Apple) and to the Google Fit app (Android) and allow your favorite apps to pull your data from there.  •  If you travel without your scale, you can monitor your weight on any other scale and enter it manually into the app.For more information on setting up the app, pairing the scale, and the features of the app, go to www.BTScalesByConair.com For more information on the scale, on how to set yourself up as a user without the app, and about what your body analysis readings mean, please read this instruction booklet.Syncing BluetoothThis is a Bluetooth enabled scale. It will try to broadcast a Bluetooth signal every time it is being used, even if you are not using it with the app, or your smart device is out of range. Generally, you will see the following in the scale display:Bluetooth symbol blinking: scale is trying to communicate with your smart deviceBluetooth symbol stable and (check mark symbol): Bluetooth connection has been establishedBluetooth symbol stable and X: pairing failed, no Bluetooth  connection, no data is being transmittedBluetooth symbol not visible: scale is in manual mode, no Bluetooth connection, no data is being transmitted.If a Bluetooth connection cannot be established, the scale will still measure and display all your data, as long as you are set up as a user on the scale  (read “Personal Data Setting Mode” next page).After a few seconds, the LCD will show your body weight, body fat percentage, body water percentage, BMI, bone mass and muscle mass percentage for several seconds, and then turn off automatically.If you get an error reading, make sure you are stepping on the scale in bare feet (no stockings or pantyhose) and your feet are aligned on the metal strips. If you still get an error reading, your skin may be too dry: Try rubbing a bit of lotion on the soles of your feet and make sure not to slip on the platform of the scale.NOTE:Your scale will also read error if your weight is below or above the specifications for the scale.Low battery warning: When the batteries are critically low, the scale display will show “LO” and it is time to replace the batteries (see battery replacement instructions).NOTE:If you step on the scale before “0.0” appears or if your  feet are not aligned on the electrodes, the scale will not  function properly.Weight and Body FatHow does it work?While body fat can be measured in many ways, the method used in your scale is bioelectrical impedance. This indirect method of determining body fat starts when a safe and very low electrical current is sent through the lower half of the body. The electrical current flows more quickly through water and muscle than it will through bone and fat. The scale measures the speed of the current. Based on this number, the scale estimates body fat using a multi-step, mathematical formula. Is it accurate?Measurements of body fat tend to fluctuate a lot more than simple weighing, and different methods of estimating body fat yield very different results. Just as different scales give different results, different body fat analyzers can provide very different body fat estimates. Even with the same scale the numbers will vary because:•  Weight loss tends to produce substantial, continuous, and unpredictable changes in body water content. Because body fat analysis is determined by water content in the body, results can vary considerably from day to day.•  Hydration status affects body fat results. If you’ve just worked out, there is less water for the electrical current to flow through. This may result in a higher body fat result. In the same way, if you measure your body fat after drinking a lot of fluid, it may appear that body fat is lower than it really is.The scale will now switch to Age setting mode.Age will flash. Press the UP or DOWN button to choose the age (10 to 100). Pressing and holding the UP or DOWN button will advance numbers quickly. Press the SET button to confirm the Age.The scale will now enter the Gender setting mode.Default icon will flash. Press the UP or DOWN button to choose between female, and male. Press SET button to confirm selection. The scale will display the user data for a few seconds and then will enter into body analysis mode and “0.0” will appear on the display.Note 1: If you need to edit any of your personal data, you can do so while the data is being displayed: Simply press the SET button and scale will go back to the Personal data setting mode again. Follow the instructions above.Note 2: In the Personal data setting mode, the scale will return to standby mode automatically if no button is pressed within 15 seconds, and already entered data will not be saved. If that happens, simply repeat the Personal data setting process described above.User Recognition  (when using scale without app)After your initial setup on the scale, the scale will automatically recognize you (based on your weight being within a certain range of your last measured weight) and display your user number. User number will blink for a few seconds, then become stable. If an incorrect user number is displayed (which could happen if the weight of another user of the scale is very close to yours), you can adjust to the correct user number by manually pushing the up/down arrows until the correct user number shows.If the scale cannot establish a match with an existing user profile, the word “user” will blink on the display. If you have a user number set up, you can manually enter it now (push up/down arrows until your user number shows).Body Analysis Measurement  (Using Scale Without App)Operate the scale on a secure flat floor. Tap on the platform firmly to activate the scale. Wait until you see “0.00” in kg mode or “0.0” in lb mode, then press the UP or DOWN button to select your user number. Your data (height, age, gender) will quickly display again. Once the LCD shows “0.0,” you can step on the scale. Step on barefoot with your feet aligned on the electrodes (metal strips) on the two sides of the platform. If your feet are not bare, the scale will not be able to take measurements and you will get an error reading. •  Skin temperature can have an influence also. Measuring body fat in warm, humid weather when skin is moist will yield a different result than if skin is cold and dry.•  As with weight, when your goal is to change body composition, it is better to track trends over time than to use individual daily results.•  Results may not be accurate for persons under the age of 16, or persons with an elevated body temperature, diabetes or other health conditions.What you need to know!  •  Percent body fat refers to the number of pounds of fat divided by your total body weight and multiplied by 100.  •  During weight loss, percent body fat doesn’t appear to be reduced as quickly  as expected because total weight loss and total body fat are decreasing at the same time (for a more detailed explanation, see next section).  •  Weight loss in the form of body fat and lean tissue (muscle) is common, and  is normal.  •  To minimize the loss of lean tissue, include regular physical activity, especially strength training, in your weight-loss plan.Why do I lose weight but my body fat percentage doesn’t change much? When you lose weight, both the numerator (pounds of body fat) and denominator (total body weight) go down, so when it’s calculated as a body fat percentage, the number can be small. For example, a person may weigh 200 pounds and have 40% body fat (= 80 pounds of body fat). He/She loses 20 pounds, but the body fat has only dropped 4% to 36%. That 4% of body fat was 15.2 pounds of fat – a very significant amount! So do not be overly concerned if you do not see the percentage change quickly as you are losing weight: Monitor the absolute number of body fat pounds lost. Remember, to minimize the loss of lean tissue, include regular physical activity, especially strength training, in your weight-loss plan.BMI – What Is It?BMI stands for Body Mass Index, a statistical term derived from height and weight. It is closely linked to body fat and health outcomes. Over 50 organizations, including the US government and the World Health Organization, have adopted BMI guidelines. BMI is inversely related to fitness, meaning that the higher your BMI, the less likely you are to be fit. Every time your body analysis monitor reads your weight and calculates your body fat, it also calculates your BMI. Along with your weight and your body fat measurements, the BMI reading gives you yet one more tool to monitor your health and fitness. Body water/hydration levelsGeneral health standards indicate that one should consume approximately  64 oz. of water per day from food and liquids to maintain a healthy level of hydration. Maintaining a good hydration level will help improve your overall health and general feeling of well-being. If your hydration levels are lower than average, you should increase your water intake accordingly. Body water/hydration level – how is it measured?The hydration level is measured by using Bioelectric Impedance Analysis (BIA). The same analysis that is used to calculate your body fat is used to calculate your hydration level. Taking into consideration a user’s age and gender, a calculation is made that determines the percentage of water. Please note: It is not recommended to take the hydration measurements in certain situations, such as following exercise, after drinking a glass of water, or directly prior to, during or shortly after menstrual cycles. Hydration may not be at normal levels during these times. Bone mass – what is it?Bone is a living, growing tissue. During youth, your body makes new bone tissue faster than it breaks down older bone. In young adulthood, bone mass is at its peak; after that, bone loss starts to outpace bone growth, and bone mass decreases. But it’s a long and very slow process that can be slowed down even more through calcium-rich diets and weight-bearing exercise.   too  lower  normal higher too       low  than    than  high        normal    normal        Body Fat  age %  %  %  %  %     Male  20-29   <13%  13.1-18%  18.1-23%  23.1-28%  28.1%+   30-39   <14  14.1-19  19.1-24  24.1-29  29.1+   40-49   <15  15.1-20  20.1-25  25.1-30  30.1+   50-59 <16  16.1-21  21.1-26  26.1-31 31.1+   60-69 <17  17.1-22  22.1-27  27.1-32 32.1+   Female  20-29   <18  18.1-23  23.1-28  28.1-33  33.1+   30-39   <19  19.1-24  24.1-29  29.1-34  34.1+   40-49   <20  20.1-25  25.1-30  30.1-35  35.1+   50-59 <21  21.1-26  26.1-31  31.1-36 36.1+   60-69 <22  22.1-27  27.1-32  32.1-37 37.1+   Body Water  age %  %  %  %  %   Male  20-69  <46.4% 46.5-49.9%  50-65%  65.1-70% 70.1%+   Female 20-69  <43.9  44-44.9  45-60  60.1-67.6  67.7+  Bone Mass             age %  %  %  %  %     Male  20-29  <7.2%  7.3-7.5%  7.6-8.4%  8.5-8.7% 8.8%+   30-39 <7.0  7.1-7.3  7.4-8.2  8.3-8.5  8.6+   40-49 <6.6  6.7-6.9  7-7.8  7.9-8.1  8.2+   50-59 <6.2  6.3-6.5  6.6-7.4  7.5-7.7  7.8+   60-69 <5.9  6.0-6.2  6.3-7.1  7.2-7.4  7.5+            Female 20-29  <5.8%  5.9-6.1%  6.2-7%  7.1-7.3%  7.4%+   30-39 <5.6  5.7-5.9  6-6.8  6.9-7.1  7.2+   40-49 <5.2  5.3-5.5  5.6-6.4  6.5-6.7  6.8+   50-59 <4.8  4.9-5.1  5.2-6  6.1-6.3  6.4+   60-69 <4.5  4.6-4.8  4.9-5.7  5.8-6.0  6.1+  Body Analysis Table  Always keep in mind that you know your body best. The following ranges of      body fat, BMI, body water, muscle and bone mass are offered as guides.
©2016 Conair Corporation. East Windsor, NJ 08520, Glendale, AZ 85307. Made in China.©2016 Weight Watchers International Inc. All rights reserved. Weight Watchers is the registered trademark of Weight Watchers International Inc. and used under license.Service CentersConair CorporationService Department150 Milford RoadEast Windsor, NJ 08520Conair CorporationService Department7475 N. Glen Harbor Blvd.Glendale, AZ 853071-800-326-6247www.conair.comFCC Markings:This device complies with Part 15 of the FCC Rules. Operation is subject to the  following two conditions: (1) this device may not cause harmful interference, and  (2) this device must accept any interference received, including interference that  may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are  designed to provide reasonable protection against harmful interference in a  residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is  no guarantee that interference will not occur in a particular installation. If this  equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•  Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications not expressly approved by ConairCorporation, the manufacturer of this product and the party responsible for  compliance, could void the user’s authority to operate the equipment.LIMITED TEN YEAR WARRANTYConair will repair or replace, at our option, your appliance free of charge for  120 months from the date of purchase if the appliance is defective in workmanship  or materials.To obtain service under this warranty, return the defective product to the service  center listed below that is nearest you, together with your sales slip and $5.00 for postage and handling. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a receipt, the warranty period shall be 120 months from the date of manufacture. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT  LIMITED TO THE IMPLIED WARRANTY OF MERCHANT  ABILI TY AND FITNESS FOR  A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 120-MONTH  DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR  CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion  or limitation of special, incidental, or consequential damages, so the above  limitation may not apply to you. This warranty gives you specific legal rights,  and you may also have other rights which vary from state to state.Instructions for use  of Weight Watchers  Bluetooth® bathroom scaleCongratulations! By purchasing this Weight Watchers scale, you’ve made the first step toward taking control of your weight. To get the greatest benefit from your purchase, please read this entire brochure before using your scale.Model WW910FPlease register this product at: www.conair.com/registrationSpanish translation available online at www.conairscales.comIB-14592A16AD023068Scales bybody analysis scaleWho should monitor bone mass?Most people have no need to monitor bone mass, but certain groups – post- menopausal women, men and women with certain diseases, and anyone who takes medications that affect bone tissue – might want to watch for decreases in bone mass. The bone mass reading is to be used as a guide only. Watch for trends over time and contact your health-care provider for a more detailed explanation of the readings and with any questions or concerns. Important Information ConcerningWeight ManagementYour scale is the best tool for monitoring weight. While not the only measure of weight loss, scales are the most popular method used to gauge weight-loss success. A scale measures the sum of your total body weight, which includes bone, muscle, fat, and water. Body weight fluctuates during the day, and from day to day, depending on a variety of factors.  • Salt and carbohydrate intake can affect the body’s water retention.  • A large meal adds weight and can cause water retention.  • Dehydration from exercise, illness, or low fluid intake can result in weight loss. •  Muscle is also a factor. Heavy-duty resistance training can build muscle, which can affect weight. • The menstrual cycle can cause temporary weight gains and losses.When You’re Losing WeightIt’s important not to put too much stock in the exact number on the scale,  because it can and will vary. This is especially true when you’re dieting. Small weight gains and losses are common as your body adjusts to fewer calories and more exercise. Your scale is a valuable tool when used to track weight over a  period of weeks and months. Be aware that different scales often give different results. The scale at your doctor’s office may show one weight, and your scale at home another. So don’t get too caught up with a single number.Don’t Overdo It!A surefire way to get overly concerned with your weight is to weigh yourself too often. We generally recommend weighing yourself no more than once a week when you’re dieting. Though it’s hard to stick to this pattern, it’s the best way to prevent unnecessary concern with normal weight fluctuations, which are unrelated to your weight-loss efforts. Regardless of your weighing habits, it’s important that you’re consistent.Here are 5 rules for effectively monitoring your weight – weigh yourself:To keep track of your weight, record only one number for the week. This will give you a clear picture of any trend your weight is following.When You’re Maintaining WeightFluctuations in day-to-day weight tend to be smaller when weight is stable,  so a more frequent weigh-in pattern is helpful. To maintain a stable weight:  • Weigh yourself more often than once a week  •  Use the “5-pound rule” – research shows that people who keep weight  within a 5-pound range are more likely to maintain a healthy body weight  over the long termMake the most of it!To summarize, make the most of the body analysis feature by:• Tracking change over time and not day to day.• Using the same scale as much as possible.•  Being extra-consistent in the time of day, day of the week, time before or after  food and fluid consumption, before or after exercise, etc., when measuring  body composition.While a scale/body fat monitor can be a useful tool on your weight-loss journey, it’s not in and of itself a program for losing weight. Come to a meeting and learn from us the best way to lose and maintain weight. Call 1-800-651-6000 or go to WeightWatchers.com to find a  meeting near you.Facts You Should KnowYour Weight Watchers scale is a precise measuring instrument that is most accurate when weighing a stationary object. To ensure accurate readings, always try to stand on the same area of the scale platform and DO NOT MOVE. Should the weight on the scale exceed the scale’s capacity, you may see an error message ”Err.”Electronic sensors are sensitive. Be careful not to drop or jar the scale. Place it gently onto floor surface, and store where it will be protected from impact. The scale is an electronic instrument and should never be submerged in water. Clean with damp cloth and/or glass cleaner.When the scale batteries need to be replaced (display shows “LO”), remove the screw from the battery cover on the bottom of the scale and remove the cover. Replace the old batteries with 3 new AAA batteries. Replace the battery cover and tighten the screw again. Remove used batteries promptly. Dispose of the old batteries properly. Remove batteries from equipment that is not to be used for an extended period of time. Do not attempt to open the scale or to remove any components. Servicing should be done by qualified technicians only. See warranty information below.• Once a week, on the same    day of the week• At the same time of day• In the same place• Wearing the same clothes• Using the same scale  Body Analysis Table Continued  Bone Mass age  Lower than normal  Normal   Higher than normal     Male  10-14  35.1 - 46.7%  46.8 - 58.3%  58.4 - 70%   15-19  34.1 - 45.7%  45.8 - 57.3%  57.4 - 70%   20-29  33.1 - 44%  44.1 - 55%  55.1 - 66%   30-39  32.1 - 42.3%  42.4 - 52.7%  52.8 - 66%   40-49  31.1 - 40.3%  40.4 - 49.7%  49.8 - 59%   50-59  30.1 - 38.7%  38.8 - 47.3%  47.4 - 56%   60-69  29.1 - 37.7%  37.8 - 46.3%  46.4 - 55%   70-100  28.1 - 36.7%  36.8 - 45.3%  45.4 - 54%   Female  10-14  28.1 - 32%  32.1 - 40%  40.1 - 52%   15-19  27.1 - 26.7%  26.8 - 33.3%  33.4 - 47%   20-29  26.1 - 31.7%  31.8 - 37.3%  37.4 - 43%   30-39  25.1 - 30%  30.1 - 35%  35.1 - 40%   40-49  23.1 - 28%  28.1 - 33%  33.1 - 38%   50-59  22.1 - 26.7%  26.8 - 31.3%  31.4 - 36%   60-69  21.1 - 25.7%  25.8 - 30.3%  30.4 - 35%   70-100  20.1 - 24.7%  24.8 - 29.3%  29.4 - 34%   BMI              %    %  %      <20    20-25  25+

Navigation menu