Conexant Systems 39000M 2.4/5 GHz IEEE 802.11g/a WLAN MiniPCI card User Manual Revised

Download:
Mirror Download [FCC.gov]
Document ID	363750
Application ID	QvmtDrHc+G8nCH55pfB8jQ==
Document Description	Revised user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.42kB (467810 bits)
Date Submitted	2003-10-09 00:00:00
Date Available	2003-10-20 00:00:00
Creation Date	2003-10-09 14:50:29
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-10-09 14:50:35
Document Title	Microsoft Word - Install manual OSZ39000M v 0.3.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	robben

OEM installation manual
Intersil ISL39000M
IEEE 802.11a/g MiniPCI WLAN Card
OEM installation Manual
Version 0.3
FCC ID: OSZ39000M
Page 1 of 12
OEM installation manual
Table of Contents
0-INTRODUCTION ....................................................................................................3
1-OEM INSTALLATION PROCEDURE.................................................................3
1.0 HOST PC NOTEBOOK ..........................................................................................3
1.1 INSTALLING THE MINIPCI CARD INTO THE HOST PC NOTEBOOK ....................3
1.2 INSTALLING THE SOFTWARE DRIVERS ................................................................3
1.3 WIRELESS LAN INSTALLATION GUIDE LINES AND AUTHORIZATION FOR USE .7
2-REGULATORY INFORMATION.........................................................................7
2.1 FCC INFORMATION TO USER .............................................................................7
2.2 FCC GUIDELINES FOR HUMAN EXPOSURE ........................................................7
2.3 FCC ELECTRONIC EMISSION NOTICES..............................................................7
2.4 FCC RADIO FREQUENCY INTERFERENCE STATEMENT .....................................8
2.5 FCC LABELING REQUIREMENTS (INSTRUCTION FOR OEM INTEGRATOR) ......8
2.6 REQUIRED STATEMENTS IN THE END-USER MANUAL (INSTRUCTION FOR OEM
INTEGRATOR).............................................................................................................8
2.7 EXPORT RESTRICTIONS .....................................................................................11
2.8 EUROPE - EU DECLARATION OF CONFORMITY ...............................................11
3-TECHNICAL SPECIFICATIONS .......................................................................12
FCC ID: OSZ39000M
Page 2 of 12
OEM installation manual
0-Introduction
The Intersil ISL39000M WLAN NIC is a complete wireless high speed Network Interface Card (NIC).
It conforms to the IEEE 802.11g and IEEE 802.11a protocol and operates in the 2.45 GHz and 51505350MHz frequency bands.
It provides a complete reference design evaluation platform of hardware and software to system
providers or integrators requiring wireless data communications capability and is ideal for integration
into computer platforms.
• Fully compliant with the IEEE 802.11g and IEEE 802.11a WLAN standards
• FCC Certified Under Part 15 (pending) to Operate in the 2.45 GHz and 5150-5350MHz Bands
• Support for 54, 48, 36, 24, 18, 12, 9, and 6 Mbps OFDM, 11 and 5.5 Mbps CCK and legacy 2 and 1
Mbps data rates
• Driver Supports Microsoft Windows ® 98/SE, ME, XP and 2000 (SR1)
IMPORTANT NOTICE: The Intersil ISL39000M WLAN NIC with FCC ID: OSZ39000M may be
installed in those host systems which do not switch off the card and its embedded transmitter in the
event the lid/LCD screen of the host system is closed during normal operation of the host system.
1-OEM Installation procedure
1.0 Host PC Notebook
The Intersil ISL39000M WLAN MiniPCI Card is authorized to be installed into the following host PC
notebooks:
1—Toshiba Satellite Pro type 6100 series
1.1 Installing the miniPCI card into the host PC Notebook
a-open miniPCI slot cover of host PC Notebook housing (please observe the necessary ESD
precautions).
b-insert miniPCI card into miniPCI slot
c-connect the host PC notebook antennas to the miniPCI card antenna connectors (Hirose type UFL
connector)
d-close miniPCI slot cover of host PC Notebook housing
1.2 Installing the software drivers
a-Start windows
b-When windows detects new hardware and asks for drivers, point to directory where the Intersil driver
is located (for example floppy drive, cdrom , harddisk) to install.
c-after drivers are installed, restart windows
d-the Intersil WLAN icon will appear in system tray on the bottom right of the screen (see yellow
arrow in fig. 01)
FCC ID: OSZ39000M
Page 3 of 12
OEM installation manual
fig, 01: Intersil WLAN icon
e-double click the Intersil WLAN icon to open the WLAN settings, the following window will appear
(see fig.02)
fig, 02: Intersil WLAN settings window
f-click on configuration tab and select which type of network is required (access point or Peer-to-peer
mode), see fig. 03.
fig, 03: WLAN network type setting window
FCC ID: OSZ39000M
Page 4 of 12
OEM installation manual
g-select what TX rate is required (default setting is fully automatic) see fig. 04.
fig, 04: WLAN tx rate setting window
h-select what encryption type is required, 64 or 128 bit WEP (default setting is disabled) see fig. 05.
fig, 05: WLAN encryption rate setting window
FCC ID: OSZ39000M
Page 5 of 12
OEM installation manual
i-click on the status tab to see the connection status (fig.06).
fig, 06: WLAN network status
j-click on the about tab to see the software drivers versions and MAC address (fig.07).
fig, 07: WLAN driver and MAC addres information
FCC ID: OSZ39000M
Page 6 of 12
OEM installation manual
1.3 Wireless LAN installation guide lines and Authorization for use
Installation and use of this Wireless LAN device must be in strict accordance with the instructions
included in the user documentation provided with the product. Any changes or modifications made to
this device that are not expressly approved by Intersil may void the user’s authority to operate the
equipment. Intersil is not responsible for any radio or television interference caused by unauthorized
modification of this device, or the substitution or attachment of connecting cables and equipment other
than specified. It is the responsibility of the user to correct any interference caused by such
unauthorized modification, substitution or attachment. Intersil and its authorized resellers or
distributors will assume no liability for any damage or violation of government regulations arising from
failing to comply with these guidelines.
The use of Wireless LAN devices may be restricted in some situations or environments for example:
* On board of airplanes, or
* In an explosive environment, or
* In case the interference risk to other devices or services is perceived or identified as harmful.
In case the policy regarding the use of Wireless LAN devices in specific organizations or environments
(e.g. airports, hospitals, chemical/oil/gas industrial plants, private buildings etc.) is not clear, please
first verify authorization to use these devices prior to operating the equipment.
2-Regulatory information
2.1 FCC Information to User
This product does not contain any user serviceable components and is to be used with approved
antennas only. Any product changes or modifications will invalidate all applicable regulatory
certifications and approvals
2.2 FCC Guidelines for Human Exposure
SAR (Specific Absorption Rate) for this device was measured in accordance with FCC OET Bulletin
65 (Supplement C) and guidelines established in IEEE C95.1-1991. Based on these measurements, this
device fulfills the SAR limits for general population / uncontrolled exposure
Caution:
In order to comply with RF exposure limits established in the ANSI C95.1 standards, the user is
advised to maintain a distance of at least 1.0 cm from the antenna of this device while it is in use.
2.3 FCC Electronic Emission Notices
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired
operation.
Caution:
1--Within 5.15 to 5.25 MHz bands, UNII devices are restricted to indoor operations to reduce any potential
harmfull interference to co-channel Mobile Satelite Systems (MSS) operations.
2--High power radars are allocated as primary users in the 5.25 to 5.35GHz and 5.65 to 5.85GHz bands. These
high power radar stations can cause interference with and/or damage to this device.
FCC ID: OSZ39000M
Page 7 of 12
OEM installation manual
2.4 FCC Radio Frequency Interference statement
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area may cause harmful interference, in which case the user
will be required to correct the interference at his own expense.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV technician for help
2.5 FCC labeling requirements (instruction for OEM integrator)
If the FCC ID on the label of the module is not visible when the module is installed inside the host
system, then the outside of the host system into which the module is installed must also display a label
referring to the enclosed module. This exterior label can use wording such as the following: “Contains
Transmitter Module FCC ID: OSZ39000M” or “Contains FCC ID: OSZ39000M.” Any similar
wording that expresses the same meaning may be used (reference: FCC Public Notice DA 00-1407 of
June 26, 2000, source: www.fcc.gov).
2.6 Required statements in the end-user manual (instruction for OEM integrator)
The statements in sections 2.1, 2.2., 2.3 and 2.4 of this manual must be included in the end-user
manual. In addition to these statements the OEM integrator must clearly indicate the location of the
antennas in the host system.
The following photographs (on next two pages) must be included in the end-user manual in order to
fully inform the end-user about the exact location of the antennas.
With these statements and the explanatory photographs it is prevented that the end-user can not
determine of how to maintain compliance with the requirement of the minimum separation distance of
1 cm between the antennas and his/her body.
FCC ID: OSZ39000M
Page 8 of 12
OEM installation manual
FCC ID: OSZ39000M
Page 9 of 12
OEM installation manual
FCC ID: OSZ39000M
Page 10 of 12
OEM installation manual
2.7 Export restrictions
This product or software contains encryption code which may not be exported or transferred from the
US or Canada without an approved US Department of Commerce export license.
2.8 Europe - EU Declaration of Conformity
This device complies with the essential requirements and other relevant provisions of the European
R&TTE Directive 1999/5/EC.
Compliance to essential test suites is met per standards:
R&TTE Harmonized Standard
LVD specification
EN 60950
ETSI EMC specification
ETSI EN 301 489-1 V1.2.1
(2000-08)
Description
EN 60950,ed. (1992), incl A1(1993), A2(1993), A3(1995) and
A4(1997)
Safety of information technology equipment, including electrical
business equipment.
Meets R&TTE directive art. 3.1.a of essential requirements on
protection of the health and sefety of the user.
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment
and services;
Part 1: Common technical requirements
ETSI EN 301 489-17 V1.1.1
(2000-09)
Part 17: Specific conditions for Wideband data and HIPERLAN
equipment
ETSI RF specification
ETSI EN 300 328
Part 1 V1.2.2 (2000-07)
Meets R&TTE directive art. 3.1.b of essential requirements on
protection with respect to Electro Magnetic Compatibility.
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Wideband Transmission systems; data transmission equipment
operating in the 2,4 GHz ISM band and using spread spectrum
modulation techniques;
Part 1: Technical characteristics and test conditions
ETSI EN 300 328
Part 2 V1.1.1 (2000-07)
Part 2: Harmonized EN covering essential requirements
under article 3.2 of the R&TTE Directive
EN 301 893
V1.1.1 (2001-01)
Broadband Radio Access Networks (BRAN), HIPERLAN Type 2
Harmonised EN covering essential requirements of article 3.2 of the R&TTE
Directive
Meets R&TTE directive art. 3.2.a on effective use of spectrum so as to
avoid harmful interference.
Important Notice :
This device is a dual band 2.4 GHz / 5 GHz low power RF device
intended for home and office use in EU and EFTA member
states. In some EU / EFTA member states some restrictions may
apply. Please contact local spectrum management authorithies
for further details before putting this device into operation.
EU versions of this WLAN device may only have 4 channels in 5150-5250MHz band with RF output power
limited to 50 mW. This device is intended for indoor use only.
FCC ID: OSZ39000M
Page 11 of 12
OEM installation manual
3-Technical Specifications
Radio Technology
Operating Frequency
Modulation Schemes
RF Channel Availability
Data Rate
Media Access Protocol
Transmitter RF Output Power
Antenna Type
Operating Voltage
Interface
Formfactor
Device driver Support
FCC ID: OSZ39000M
IEEE 802.11g and IEEE 802.11a (DSSS and OFDM)
2400-2497MHz ISM band and 5150-5350 MHz UNII band
DQPSK, DBPSK, CCK, 16 QAM, 64 QAM
2.4 GHz band
11 channels for United States (2412 MHz to 2462 MHz)
13 channels for Europe (2412 MHz to 2472 MHz)
13 channels for Japan (2412 MHz to 2472 MHz), channel 14 only
available in DSSS mode (11 Mbps max)
5 GHz band
8 channels for US and Europe (5150 MHz to 5350MHz)
4 channels for Japan (5150 MHz to 5250MHz)
Support for 54, 48, 36, 24, 18, 12, 9, and 6 Mbps OFDM, 11 and
5.5 Mbps CCK and legacy 2 and 1 Mbps data rates
CSMA/CA with ACK
2400-2497 MHz: < 18.0 dBm EIRP (typical) including antenna gain
5150-5250 MHz: < 17.0 dBm EIRP (typical) including antenna gain
5250-5350 MHz: < 20.0 dBm EIRP (typical) including antenna gain
Internal diversity antennas with 1 dBi rated gain
3.3 VDC via PC host miniPCI slot
miniPCI
miniPCI III B
Microsoft® Windows® NT, 2000, ME, and XP
Page 12 of 12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2003:10:09 14:50:29+02:00
Modify Date                     : 2003:10:09 14:50:35+03:00
Page Count                      : 12
Creation Date                   : 2003:10:09 12:50:29Z
Mod Date                        : 2003:10:09 12:50:29Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : robben
Metadata Date                   : 2003:10:09 12:50:29Z
Creator                         : robben
Title                           : Microsoft Word - Install manual OSZ39000M v 0.3.doc
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools