ConnecteDevice CD002 Bluetooth Low Energy Smart Watch User Manual CD Watch2 0 UserGuide 20140318 for Lab
ConnecteDevice Limited Bluetooth Low Energy Smart Watch CD Watch2 0 UserGuide 20140318 for Lab
User Manual
Quick Start Guide NOTIFICATIONS Blink and vibrate with optional beeps POWER Power on/off > 3 sec COMMAND Calendar and Reminder alerts: Alerts you when there are upcoming events or reminders. SET TIME Pull 1/2 way and turn to set the time PAGE LEFT PAGE RIGHT Tap PAGE LEFT or PAGE RIGHT to view additional information Tap PAGE LEFT and PAGE LEFT together to see the time again Alarms: Alerts you when you have alarms. This function is currently supported by Android only. LIGHT Tap any button Pairing: When the watch is OFF, press COMMAND + POWER buttons until 1st beep (approx. 3 sec) and all icons will blink every 2 sec. Reset the watch: Press and hold the COMMAND + POWER + PAGE LEFT + PAGE RIGHT buttons until you see the ALERT icon on the CONNECTED Display and then the watch turns off. Low and Critical battery alerts: The CONNECTED display shows the battery percentage and the Low and Critical battery icons blinks respectively. NOTIFICATIONS Incoming Call, Missed Call notification: Caller ID (iOS only at this moment) will be displayed during incoming calls. Call numbers will be display if the number is not stored in your phone book. Caller ID support Latin characters only. TEXT and social media app alerts: Support SMS, MMS and social media posts on Facebook, Twitter and message notification from WhatsApp, WeChat, Skype and more... To find the COGITO watch: The watch beeps and blinks when tapping the find my watch icon in the CONNECTED WATCH app. To activate out of range notification: After tapping the out of range icon , the watch beeps and blinks when your phone and watch are apart from each other. EN Email alerts: Inbound email alerts. For iOS users: Search for the “CONNECTED WATCH” app in the App Store. Compatible with iOS 7 devices that support Bluetooth® Smart technology such as the iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPad mini, iPad (3rd and 4th generation), and iPod touch (5th generation). For Android users: Download the “CONNECTED WATCH” app from the Google Play. The app is available for selected Android 4.3 and Android 4.4 devices that support Bluetooth® Smart technology. Currently compatible with Samsung Galaxy S3, S4, S4 Mini, S4 Active, Note 2, Note 3, HTC One, Nexus 5, etc. Step 3: Customize your COGITO watch’s notification settings. EN Step 1: Download the CONNECTED WATCH app Tap the Notification Settings icon at the top right of the CONNECTED WATCH app (iOS7 and Android) and select which notifications do you wish to receive on your COGITO watch. To acknowledge the notification: Press the COMMAND button or check the notification on your mobile phone or tablet. To mute/unmute your watch: Press the COMMAND button for 5 sec to mute the watch. Press another 5 sec to unmute the watch and you will hear a beep sound. Visit www.cogitowatch.com for the latest compatibility list. Contact support@cogitowatch.com if App Store or Google Play is not supported in your country. Step 2: Pair and connect the COGITO watch with your mobile phone or tablet 1. Set the watch into PAIRING mode by pressing the COMMAND + POWER until 1st beep (approx. 3 sec) and all icons will blink every 2 sec. 2. For iOS7 user: Open your Bluetooth settings and select “COGITO” in the device list. Press “PAIR” when prompted. For Android user: Open the CONNECTED WATCH app and tap the Device List icon at the bottom left. The app will search for your watch accordingly. Select “COGITO” in the device list to connect. Mute the watch Unmute the watch To take photos using your COGITO watch: Tap the Camera icon in the CONNECTED WATCH app, this will trigger the camera interface of the app. Press the COMMAND button you can take photos remotely. :7 CO GI TO 4 3 : C R 20 3 Ch in a pe ty tte TD Ba E VIC se E Ltd As • En • gine e re d in US A s ig EC le HO de in Mo 10 A 02 TM . co ch D0 I ER by X AV red l: QI T C D 0 02 C ID • I at -C de •F IST RES ER AT 00 Pow e Battery cover (Open to insert/ replace the battery) One year free limited warranty 1 40 1 . 8 8 88 8 8 8 model CR2032 1. Open the back case of the watch to remove the old battery. 2. Now replace with new battery. 3. Carefully replace the back case of the watch, ensuring that the o-ring is correctly seated (for a water tight seal). Replacing the analog movement battery: model SR626SW 1. Open the back case of the watch and remove the CR2032 cell button battery. 2. Remove the protective sticker and carefully set it aside. 3. Remove analog system battery located beneath the protected sticker. (model SR626SW, battery life lasts up to 3 years**) 4. Carefully return the protective sticker. 5. Insert the CR2032 connected system battery and carefully return the back case of the watch ensuring that the o-ring is correctly seated (for a water tight seal). ** Battery life may vary depending on the volume of the notification, brand and condition of battery. EN Replacing the connected system battery: Register your product by setting-up a CONNECTEDEVICE account in the CONNECTED WATCH app. You will need to keep your original receipt as proof of purchase. To keep your watch in good condition and to avoid voiding the warranty: • Do not expose the watch to excessive pressure, impact, dust, open flames or extreme temperatures. • Operating temperature: -20 to +55C. (-4 to +131F) • Always ensure the back case and o-ring is correctly in place and the watch is tightly sealed before exposing the watch to any moisture or liquid. • Do not attempt to repair or modify the watch yourself. Service and maintenance should be performed by authorized technicians. • 10 ATM/100 M of water resistance means that your watch can be worn for most indoor or outdoor activities, including most water sports. Do not wear it while bathing, snorkeling or scuba diving. • Avoid submerging the watch for an extended period of time. • To maintain water resistance, do not press any buttons or pull out the crown while under water. • Keep the front glass away from sharp or hard objects to prevent scratches. • Exposure to high or low temperatures or frequent successive alerts may shorten battery life. • Keep the watch, accessories and any small parts out of the reach of children. For support, please email us at support@cogitowatch.com For more information about the watch and CONNECTED WATCH app, visit cogitowatch.com Thank you for supporting COGITO™ FCC/ Industry Canada Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this Bluetooth® device not expressly approved by the party responsible for compliance could void the user’s authority to operate it. Certification and Safety approvals This product is CE marked according to the provisions of the R&TTE Directive (99/5/EC). We declare that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information, please refer to website. Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer under license. IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. NCC 本產品符合低功率電波輻射性電機管理辦法 第十二條、第十四條等條文規定: 1. 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 2. 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干 擾。 Company name : CONNECTEDEVICE Ltd -8/F, Tai Yip Building, 141 Thomson Rd, Wan Chai, HongKong EN Note on environmental protection: After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment. FR ES DE IT DU Fin FCC/ Industry Canada Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this Bluetooth® device not expressly approved by the party responsible for compliance could void the user’s authority to operate it. Certification and Safety approvals This product is CE marked according to the provisions of the R&TTE Directive (99/5/EC). We declare that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information, please refer to website. Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer under license. IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. NCC 本產品符合低功率電波輻射性電機管理辦法 第十二條、第十四條等條文規定: 1. 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 2. 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干 擾。 Company name : CONNECTEDEVICE Ltd -8/F, Tai Yip Building, 141 Thomson Rd, Wan Chai, HongKong EN Note on environmental protection: After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment. FR ES DE IT DU Fin
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Create Date : 2014:03:18 15:32:05+08:00 Creator : Adobe Illustrator CS4 Modify Date : 2014:03:27 10:54:14+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Title : CD_Watch2.0_UserGuide_20140318_for_Lab Metadata Date : 2014:03:18 15:32:40+08:00 Creator Tool : Adobe Illustrator CS4 Thumbnail Width : 256 Thumbnail Height : 56 Thumbnail Format : JPEG Thumbnail Image : (Binary data 2510 bytes, use -b option to extract) Instance ID : uuid:c062bfbe-b240-45b9-9f05-e59549a0a59a Document ID : xmp.did:A3505F2A59AEE311A1F7BF199ACD4BEF Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : uuid:fc54cea5-e7c7-4b2a-ab79-9ceca57e1083 Derived From Document ID : xmp.did:994B1FA74EAEE311888C8C96B4678291 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved, saved, saved History Instance ID : xmp.iid:95041ad8-fb9a-e645-bb4f-0d83db181d68, xmp.iid:02c7bc89-2610-de4b-ab21-ca7e4f35cdcf, xmp.iid:994B1FA74EAEE311888C8C96B4678291, xmp.iid:A3505F2A59AEE311A1F7BF199ACD4BEF History When : 2013:12:16 21:23:53+08:00, 2014:03:18 02:59:18+08:00, 2014:03:18 11:37:38+08:00, 2014:03:18 15:31:53+08:00 History Software Agent : Adobe Illustrator CC (Windows), Adobe Illustrator CC (Windows), Adobe Illustrator CS4, Adobe Illustrator CS4 History Changed : /, /, /, / Ingredients File Path : COGITO 024 Black front.png Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : nc-button-photo@2x.png, device-alarm@2x.png, device-find@2x.png, COGITO 024 Black front.png Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 109.999832 Max Page Size H : 109.999832 Max Page Size Unit : Millimeters Font Name : CenturyGothic, CenturyGothic-Bold, AdobeSongStd-Light Font Family : Century Gothic, Century Gothic, Adobe 宋体 Std Font Face : Regular, Bold, L Font Type : Open Type, Open Type, Open Type Font Version : Version 2.35, Version 2.35, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False Font File Name : GOTHIC.TTF, GOTHICB.TTF, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Red 032 C, PANTONE Process Black C, PANTONE 801 C, PANTONE 431 C Swatch Groups Colorants L : 43.921600 Swatch Groups Colorants A : -3 Swatch Groups Colorants B : -6 Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.00 Trapped : False GTS PDFX Version : PDF/X-4 Page Count : 7EXIF Metadata provided by EXIF.tools