Continental Advanced Antenna LTECOMPB0 LTE Kompensator US User Manual Kathrein Briefkopf

Download:
Mirror Download [FCC.gov]
Document ID	2938885
Application ID	+DihVrSoXMNf7NBHMOSypQ==
Document Description	manual_final_b
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.83kB (272825 bits)
Date Submitted	2016-03-23 00:00:00
Date Available	2016-03-31 00:00:00
Creation Date	2016-01-08 14:32:37
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2016-02-22 13:10:17
Document Title	Kathrein-Briefkopf

Cellular Signal Booster
(Compensator)
LTECOMPB0
BMW Part Number + Index:
6803145-II
Kathrein Part Number:
50110260
Page 1
Contents
1.
Introduction ........................................................................................................................................ 3
2.
Installation Options ............................................................................................................................ 3
3.
Antenna Kitting ................................................................................................................................... 4
4.
Compensator Specifications ............................................................................................................... 4
5.
Safety and Recommendations ............................................................................................................ 7
Page 2
1. Introduction
The Compensator is a mobile consumer Signal Booster which operates on the frequencies and in the
market areas of multiple licenses and will be integrated in the car only by the car-manufacturer or
in case of replacement by a professional garage. The end-user does not have to do any installations
or adjustments.
The Compensator is connected with the car antenna (e.g. roof top antenna) and the coupling tray
(Cradle) in series. While the cradle is located for example in the center console of the car, the
Compensator itself is installed for example in the C-pillar or under the back seat.
The Compensator is a powerful and effective way to improve link quality and coverage for mobile
phones when used within a car. This is basically by means of compensating losses and providing a
connection to a permanent optimal positioned external car antenna. The Compensator ensures the
conformance with mobile network standards as well as the compliance with country regulations.
2. Installation Options
Example for a principle setup in a car.
The Compensator unit is designed for in-car use only. It MUST be well integrated into the
automotive environment (Tambient max. 85 °C) and should be installed by the OEM (carmanufacturer) or in case of replacement by a professional garage. Only the antennas listed at the
Antenna Kitting section are allowed to be used along with the Compensator.
Page 3
3. Antenna Kitting
Cradle Options:
1.
WCH-173
WCH-187
2.
WCH-184
3.
WCA Small BMW
Outside Antenna Options:
BMW PART No.
Ant 1:
DA GSS/TEL/TEL/SDARS LTE
9659898
Ant 2:
Telefonantenne1 Frontend Folie
9273669
Ant 3:
ECU-01 R1-US-3G + ANT 3G TEL GPS SDARS
9395306-01 +
9303036-03
4. Compensator Specifications
General Specifications
Model Number
Antenna/Cradle Connectors
DC Connector
Impedance
Power Requirements
LTECOMPB0
FAKRA (male) DIN 72594-1/ISO 20860-1
MQS-Type
50 Ohm
DC 9 V - 16 V; 500 mA; 2,5 A peak max.
Supported Bands
Frequency
Band
Band 2
Band 4
Band 5
Band 12/17
Band 13
UL (Tx)
[MHz]
1850 – 1910
1710 – 1755
824 – 849
698 – 716
777 – 787
DL (Rx)
[MHz]
1930 – 1990
2110 - 2155
869 – 894
729 – 746
746 – 756
Page 4
Service
Supported
GSM/WCDMA/LTE
WCDMA/LTE
GSM/WCDMA/LTE
LTE
LTE
Bypass State
Condition
Min.
Value
Typ.
Value
Max.
Value
698 MHz – 1 GHz
-3.6
-2.6
-1.6
1 GHz – 2.2 GHz
-5.5
-4.5
-2.5
Parameter
Gain G
(Bypass)
Unit
dB
dB
Gain Uplink
Parameter
Gain G
Uplink
Condition
Min.
Value
Max.
Value
Band 2
15
22.8
Band 4
15
22.8
Band 5
15
22.8
Band 12/17
15
22.8
dB
Band 13
15
22.8
dB
Condition
Min.
Value
Max.
Value
Unit
Band 2
15
22.8
Band 4
15
22.8
Band 5
15
22.8
Band 12/17
15
22.8
dB
Band 13
15
22.8
dB
Unit
dB
dB
dB
Gain Downlink
Parameter
Gain G
Downlink
Page 5
dB
dB
dB
Output Power Uplink
Parameter
Pout
Uplink
Condition
Max.
Value
Unit
Band 2
21
dBm
Band 4
21
dBm
Band 5
21
dBm
Band 12/17
21
dBm
Band 13
21
dBm
Condition
Max.
Value
Unit
Band 2
-27
dBm
Band 4
-27
dBm
Band 5
-27
dBm
Band 12/17
-27
dBm
Band 13
-27
dBm
Output Power Downlink
Parameter
Pout
Downlink
Each Compensator is individually tested and factory set to ensure FCC compliance and
cannot be adjusted without factory reprogramming or disabling the hardware. The
Compensator will amplify, but not alter incoming and outgoing signals in order to increase
coverage of authorized frequency bands only.
The Compensator only transmits signals if a wake up signal is and a signal from a mobile
phone is detected. The wake up signal is generated by the cradle only if a mobile phone
resides in the coupling tray.
If the Compensator detects an oscillation, it will automatically stop the transmission. For a
detected oscillation the Compensator will automatically resume normal operation after a
minimum of 1 minute. After 5 such automatic restarts, the Compensator shuts off until a
manually restart is initialized by taking the mobile phone off the cradle.
Noise power, gain and linearity are maintained by the Compensator´s microcontroller.
Page 6
5. Safety and Recommendations
WARNING: The Compensator unit is designed for in-car use only. It MUST be well
integrated into the automotive environment (Tambient max. 85 °C) and should be
installed by the OEM (car-manufacturer) or in case of replacement by a
professional garage.
WARNING: Only the antennas listed at the Antenna Kitting section are allowed to be used
along with the Compensator. The use of other antennas will cause the cease
of the Compensator´s operating license.
RF SAFETY WARNING: Any antenna used with this device must be located at least
8 inches (20,3 cm) from all persons. The FCC requires that a cell phone with
cradle attached may only be used with the in-car mounted cradle. It is not
allowed to use a cell phone with an attached cradle near to the ear.
WARNING: The Outside Car-Antenna must be installed no higher than 10 meters above
ground.
This is a CONSUMER device
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your
provicer´s consetn. Most wireless providers consent to the use of Compensators. Some
providers may not consent to the use of this device on their network. If you are unsure,
contact your provicder.
You MUST operate this device with approved antennas and cables as specified by the
manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed
wireless service privider.
WARNING E911 location information may not be provided or may be inaccurate for calls
served by using this device.
This device complies with Part 15 of FCC rules. Operation is subject to two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by KATHREIN Automotive could void the
authority to operate this equipment.
Page 7

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Gläßer Michael
Create Date                     : 2016:01:08 14:32:37+01:00
Modify Date                     : 2016:02:22 13:10:17+01:00
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:02:22 13:10:17+01:00
Creator Tool                    : Acrobat PDFMaker 11 für Word
Document ID                     : uuid:4dbd8259-1ec2-4aa1-9830-4320bca84f5a
Instance ID                     : uuid:50f51a91-4459-4c51-8fb0-72db02f52f6d
Subject                         : 3
Format                          : application/pdf
Title                           : Kathrein-Briefkopf
Creator                         : Gläßer Michael
Producer                        : Adobe PDF Library 11.0
Source Modified                 : D:20160107152946
Company                         : Kathrein Werke KG
Page Layout                     : OneColumn
Page Count                      : 7

EXIF Metadata provided by EXIF.tools