Continental Automotive Singapore FASCIA7 GM Holden VE & WM MY11 Series 3 User Manual

Continental Automotive Singapore Pte Ltd GM Holden VE & WM MY11 Series 3

UserManual.wiki >

Continental Automotive Singapore >

FASCIA7 User Manual

User Manual

2 Infotainment SystemInfotainment SystemIntroduction .................................... xRadio .............................................. xAudio Players ................................. xCD Player ....................................... xAuxiliary Devices ............................ xUSB Port ........................................ xBluetooth Music .............................. xRear Seat Infotainment................... xNavigation ...................................... xPersonalization ............................... xBluetooth® ...................................... xPhone ............................................. xIntroductionGeneral informationRead this manual thoroughly to become familiar with how the infotainment system operates.The infotainment system includes navigation and audio functions.Keeping your eyes on the road and your mind on the drive is important for safe driving. The infotainment system has built-in features intended to help keep your eyes on the road and mind on the drive. Some features may be disabled while driving. Note that these functions will be grayed-out. A grayed-out function indicates it is not available when the vehicle is moving.All functions are available when the vehicle is parked. Do the following before driving:• Become familiar with the infotainment system operation, hard keys on the faceplate, and touch-sensitive screen buttons of the infotainment system.• Set up the audio by presetting favourite stations, setting the tone, and adjusting the speakers.• Set up the navigation features before beginning driving, such as entering an address or a preset destination.• Set up your phone numbers in advance so they can be called easily with the press of a single button.

Infotainment System 3When getting started, set the navigation system to your preference or delete information you may have entered using various options.WarningTaking your eyes off the road too long or too often while using the navigation system could cause a crash resulting in injury or death to you or others. Focus your attention on driving.WarningWhen driving your vehicle, be sure to keep the volume of the unit set low enough to allow you to hear sounds coming from the outsides (e.g. aware of the road and trafc conditions).Warning• Do not place beverages close to the audio system. The audio system mechanism may be damaged if you spill them.• Do not strike or allow anything to impact the audio system, damage to the system mechanisms could occur.Theft-Deterrent FeatureYour audio system includes an electronically coded security system. This electronically links the audio system to your vehicle. Under normal circumstances you will be unaware of its operation and shouldn’t need to take any action to enable the audio system to work, even if the vehicle’s battery has been disconnected and reconnected. When the electronic link between the vehicle and the audio system is interrupted, the display ‘Security Lockout Active’ will be shown. In this case, please contact your Holden Dealer.

4 Infotainment SystemFederal Communications Commission (FCC) Statement15.21 You are cautioned that changes or modications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.15.105(b)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:1) this device may not cause harmful interference and2) this device must accept any interference received, including interference that may cause undesired operation of the device.FCC RF Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specic operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Infotainment System 5Control Elements OverviewHead Unit CompactA. CONFIG, Conguration menu button.B. MAP (if available), Navigation Map view button.C. NAV (if available), Navigation menu button.D. , Help menu button.E. , CD eject button.F. CD slot.G. , Power/Volume Knob.H. or , Folder up/down button (MP3).I. or , Continuous seek up/down button (AM, FM). Seek next/previous track button (CD, USB, iPod, BT Audio and VCDC (if available)).J. Tune Knob (AM, FM) Page Up/Page Down (Menu Control) Back (Menu Control).

6 Infotainment SystemK. , Mute sound button, (AM, FM, CD, USB, iPod, BT Audio and VCDC (if available)).L. AUX, Auxiliary selection button, Front, Rear, DVD (if available).M. , Phone button (Bluetooth-Phone).N. MEDIA, Media selection button CD, USB, iPod, BT Audio and VCDC (if available)).O. RADIO, Radio Source Selection button (AM, FM).P. Touch screen (Radio, Media, Navigation, Rear View Camera,).Head Unit Standard

Infotainment System 7A. TRIP, Trip selection button.B. , Scroll up/down wheel, Radio (Next/Previous Favourite Preset) Media (Next/Previous track).C. AUDIO, Audio Source selection button (Radio and Media).D. , Bluetooth Phone accept/reject call button.E. , Volume scroll wheel (Radio, Media, Bluetooth Phone). Mute button (all media except Navigation, if available).F. NAV (if available), Navigation menu selection button.Steering Wheel Remote Control

8 Infotainment SystemOperation1. Press to turn the infotainment system on or off.2. Turn to adjust the volume.Basic SettingsClock accuracyClock accuracy may drift over times. Better clock accuracy can be achieved through synchronization with RDS clock time (for countries with RDS clock time), or GPS clock (for system with navigation).Setting the ClockThe time and date as well as the Time and Date Format can be set.Setting the Date/Time Format1. Press the CONFIG button.2. Touch the System tab.3. Touch Date/Time Format.4. Touch 12 hr. or 24 hr., the option selected is indicated by .5. Touch dd mm yyyy (23/02/2009) or dd mmm yyyy (23rd February 2009); the option selected is indicated by .6. Touch Back to leave the menu.Setting the Time1. Press the CONFIG button.2. Touch the System tab.3. Touch Set Time to access the Set Time menu.4. Touch ▼ or ▲ to set the Hour, Minute and AM/PM settings.5. Touch OK to store the settings6. Touch Back to leave the menu.OR1. Touch and hold the TIME and repeat steps 3 to 6 above.Setting the Date1. Press the CONFIG button.2. Touch the System tab.3. Touch Set Date to access the Set Date menu.4. Touch ▼ or ▲ to set the Day, Month and Year settings.5. Touch OK to store the settings6. Touch Back to leave the menu.Setting the Display BrightnessIn this menu the display brightness can adjusted.1. Press the CONFIG button.2. Touch the System Tab.3. Touch Display.4. Touch ◄ or ► to adjust the display brightness.5. Touch Back to leave the menu.

Infotainment System 9Start up ScreenIn this menu the start up screen can be enabled or disabled.1. Press the CONFIG button.2. Touch the System Tab.3. Touch Start Up Screen.4. Select either Start Up Screen ON or OFF.5. Touch Back to leave the menu.LockoutsIn the Driving Lockouts menu Lockouts can be switched On or Off. When selected the text entry into these features are locked out while the vehicle is moving.1. Press the CONFIG button.2. Touch the System Tab.3. Touch ▼ or ▲ and select the second System menu screen.4. Touch Driving Lockouts.5. Touch the On or Off option for Phone and/or NavTextEntry; the option selected is indicated by .6. Touch Back to leave the menu.Changing the LanguageIn the Language menu the Display Language can be changed.1. Press the CONFIG button.2. Touch the System Tab.3. Touch ▼ or ▲ and select the second System menu screen.4. Touch the Language option.5. Touch the language button of the language you want to select; the option selected is indicated by 6. Touch Back to leave the menu.Restore Factory SettingsWith this option you can restore the factory settings.Note: All Radio and Navigation favourites will be erased.1. Press the CONFIG button.2. Touch the System Tab.3. Touch ▼ or ▲ and select the second System menu screen.4. Touch Restore Factory Settings.5. Press OK if you want to restore the factory setting, press Cancel to exit without resetting the factory settings.

10 Infotainment SystemAdjusting the Tone (Treble, Bass, Midrange)With this option you can adjust the tone to your personal taste. The bass, midrange or treble can only be adjusted while the Equalizer is set on Custom. Bass, Midrange and Treble can be adjusted between −12 through +12.1. Press the CONFIG button.2. Touch the Audio Tab.3. Touch the Bass/Treble option.4. Treble: Touch ◄ or ► and increase or decrease the treble.5. Midrange: Touch ◄ or ► and increase or decrease the midrange.6. Bass: Touch ◄ or ► and increase or decrease the bass.7. Touch Back to leave the Bass/Treble menu.GPS Clock Sync (if available)With this option you can synchronise the clock of the Infotainment system via GPS. When activated the system clock will only be able to adjust in 30 minute increments to account for changes in time zone.1. Press the CONFIG button.2. Touch the System Tab.3. Touch ▼ or ▲ and select the second System menu screen.4. Touch GPS Clock Sync.5. Touch On or Off and switch On or Off the option; the option selected is indicated by ;.Adjusting Fader and/or BalanceWith this option you can adjust the sound balance between the front and rear speaker to your personal taste.1. Press the CONFIG button.2. Touch the Audio Tab.3. Touch Fader/Balance.4. Fader: Touch or to adjust the sound balance between the front and rear speakers.5. Balance: Touch ◄ or ► to adjust the sound balance between the left hand and right hand speakers.6. Touch Back to leave the menu.

Infotainment System 11Setting the EqualiserThe equalizer enables the user to control the sound of the Infotainment system. With Custom you can adjust the Bass/Midrange/Treble tone to your personal taste (see Adjusting the Tone).1. Press the CONFIG button.2. Touch the Audio Tab.3. Touch Equaliser.4. Touch the option required; the option selected is indicated by ;.5. Touch Back to leave the menu.Setting the Speed Dependent Volume Control (SDVC)The SDVC system adjusts the audio system volume depending on the vehicle’s speed. As the vehicle’s speed increases, the volume of the audio system also increases to compensate for the driving noise.1. Press the CONFIG button.2. Touch the Audio Tab.3. Touch Speed Dependent Volume Control.4. Touch the option required; the option selected is indicated by ;.5. Touch Back to leave the menu.Setting the Dynamic Distortion Limiter (DDL)Your audio system is equipped with a system that limits the amount of amplier distortion you can hear. When the limit is reached the volume will not be able to be increased.1. Press the CONFIG button.2. Touch the Audio Tab.3. Touch Dynamic Distortion Limiter.4. Touch the option required; the option selected is indicated by ;.5. Touch Back to leave the menu.

12 Infotainment SystemSwitching the Loudness On/OffThe Loudness feature automatically boosts the bass and treble response at low volume levels.1. Press the CONFIG button.2. Touch the Audio Tab.3. Touch ▲or ▼ to select the second Audio Settings page.4. Touch Loudness.5. Touch On or Off to either switch Loudness On or Off. The option selected is indicated by ;.6. Touch Back to leave the menu.Setting the Voice Guidance volume and switching it On or Off (if available)This option allows you to adjust the Navigation Advice Volume and to turn the Voice Guidance On or Off.1. Press the CONFIG button.2. Touch the Audio Tab.3. Touch ▲ or ▼ to select the second Audio Settings page.4. Touch Voice Guidance Volume.5. Voice Guidance: Touch On or Off to either switch Voice Guidance On or Off; the option selected is indicated by ;. 6. Voice Guidance Volume: Touch ▲ or ▼ to adjust the voice guidance volume.7. Touch Back to leave the menu.Selecting the Voice Guidance Output Speakers (if available)This option allows you to select the Voice Guidance Output Speakers via which the Voice Guidance can be heard.1. Press the CONFIG button.2. Touch the Audio Tab.3. Touch ▲ or ▼ to select the second Audio Settings page.4. Touch Voice Guidance Speakers Output.5. Touch either Driver, Front or All to select speakers via which the Voice Guidance can be heard.6. Touch Back to leave the menu.

Infotainment System 13Changing the TA, Phone or Startup VolumeVia this menu you can adjust the basic volume settings for either the TA Announcements, the Phone Phone conversations and Starting up your Infotainment system.1. Press the CONFIG button.2. Touch the Audio Tab.3. Touch ▲ or ▼ to select the second Audio Settings page.4. Touch Volume.5. TA: Touch ◄ or ► to adjust the TA volume.6. Phone: Touch ◄ or ► to adjust the Phone volume.7. Startup: Touch ◄ or ► to adjust the Start up volume.8. Touch Back to leave the menu.Switching Surround Sound On or Off (if available)This option allows you to switch On or Off the Surround Sound.1. Press the CONFIG button.2. Touch the Audio Tab.3. Touch ▲ or ▼ to select the second Audio Settings page.4. Touch Surround.5. Touch On or Off to either switch Surround Sound On or Off. The option selected is indicated by ;.6. Touch Back to leave the menu.

Infotainment System 13General InformationRadio ReceptionFrequency interference and static can occur during normal radio reception if items such as cell phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interference or static, unplug the item from the accessory power outlet.AM-FM RadioAM BandThe range for most AM stations is greater than for FM, especially at night. The longer range can cause station frequencies to interfere with each other. For better radio reception, most AM radio stations boost the power levels during the day, and then reduce these levels during the night.Static can also occur when things like storms and power lines interfere with radio reception. When this happens, try reducing the treble on the radio.FM Stereo BandFM signals only reach about 16 to 65 km. Although the radio has a built-in electronic circuit that automatically works to reduce interference, some static can occur, especially around tall buildings or hills.Radio SettingsAutoseek SensitivityWith this settings the autoseek sensitivity can be changed.When Local is selected, the Radio will seek strong signal stations. When Distant is selected, the Radio will seek weak signal stations.When Auto is selected the first sweep of the frequency band will search Local stations and the second sweep will search Distant stations.1. Press the CONFIG button, then touch the RADIO tab.2. Touch Autoseek Sensitivity.3. Touch either the Local, Distance or Auto. The option selected is indicated by ;.4. Touch Back to leave the menu.

14 Infotainment SystemFM Radio TextWith this setting FM Radio Text can be switched on/off. If additional RDS information is received from the currently tuned radio station it then appears on the touch screen.1. Press the CONFIG button, then touch the RADIO tab.2. Touch FM.3. Touch either ON or Off to switch Radio Text On or Off. The option selected is indicated by ;.4. Touch Back to leave the menu.FM Alternate FrequencyIf the current FM station becomes to weak and Alternate Frequency is switched on, the radio switches to a stronger RDS capable station with the same Program Identifier code.1. Press the CONFIG button; then touch the RADIO tab.2. Touch FM.3. Touch either On or Off to switch Alternate Frequency On or Off.The option selected is indicated by ;.4. Touch Back to leave the menu.Manual TuneWith this setting you can switch the Frequency bar On or Off.1. Press the CONFIG button, then touch the RADIO tab.2. Touch Manual Tune.3. Touch Off to switch the Frequency bar Off or touch On to switch the Frequency bar On. The option selected is indicated by ;.4. Touch Back to leave the menu.Station SearchSelecting a bandPress the RADIO button or press the tab to either select AM or FM. The selected band is shown by the tab on the touch screen.Manual seekWith this function you can manually tune to a radio station.1. Press the RADIO button to either select the AM or FM band.2. Turn the TUNE/ knob clockwise or anticlockwise, or press or to tune to the next available radio station.SeekWith this function you can automatically seek for the next or previous radio station. During seek Audio is muted.1. Press the RADIO button to either select the AM or FM band.2. Press or on the head unit or the touch screen.The radio seeks for the previous or next strong radio station in the selected band.

Infotainment System 15Preset StationsThis Infotainment System offers 3 Favourite Lists and 2 Autostore Lists (one for AM and one for FM), with 5 presets in each list. The Favourite Lists are common across AM and FM.Storing radio stations in the Autostore ListThis function scans the entire band, selects the stations with the best reception quality and stores them in the AM or FM Autostore List.1. Press the RADIO button to either select the AM or FM band.2. Touch MORE.3. Touch Show Autostore, AM or FM Autostore list will now be enabled.4. Touch MORE.5. Press Autostore Search, the Autostore pop up appears.AutoStore scans the corresponding band and stores the first 5 strongest stations.When Autostore is completed the first stored station is selected.6. To cancel Autostore, press Cancel on the Autostore pop up.Storing a radio station in the Favourite ListsWith this function you can store a radio station under any Preset.1. Press the RADIO button to either select the AM or FM band.2. Seek for a radio station either manually or automatically.3. Press and hold the Preset soft key you want to store the station.After the station is stored a beep sounds.Recall a favourite stationWith this function you can recall a station from the Favourite Lists.1. Press the RADIO button to either select the AM or FM band.2. Touch the preset key you want to listen to.RDS (Radio Data System)Your vehicle is equipped with an RDS infotainment system. RDS stands for Radio Data System, which encodes information on the system‘s FM frequency only. When you are tuned to an RDS station, the station name appears on the display.Many radio stations transmit RDS information but not all, so it is possible that this feature is not operable in some regions.The following data is available on your infotainment system:

16 Infotainment SystemPS (Program Service name):Allows you to display the Program Service Name along with the frequency, if the radio station provides it.PTY (Program TYpe):Allows you to seek only for stations with the types of programs you want to listen to.TA (Traffic Announcement):Allows you to receive traffic information.Radio text:Allows you to receive and display messages from radio stations.PTY Alarm (Program TYpe Alarm):Allows you to receive announcements concerning local and national emergencies.AF (Alternative frequency):Automatic re-tuning to the best alternative frequency.EON (Enhanced Other Networks):Automatic fade-in of traffic announcements of other stations.Switching TA on (FM only)With TA switched On and a TA transmitted from the radio station, these Traffic Announcements will be audible via the Radio.1. Press the RADIO button select the FM band.2. Touch the More soft key, then touch TA On. TP Search pops up and the Radio searches for available TP stations.3. If you want to stop TA Search, touch Cancel.4. If no TP station is found, No TP Station will pop up.5. If a TP station is found, TA will be displayed on the Touch Screen.6. When performing Auto seek only TP Stations will be searched for.7. When a Traffic Announcement is received the corresponding pop up will be displayed.Program Type (PTY) Seek (FM only)With this function you can to tune to Program Type based stations rather than station based on frequencies. There are 6 categories are available: Pop, Country, Rock, Classical, Jazz and Any.1. Press the RADIO button select the FM band.2. Touch the More soft key, then touch PTY List. The PTY List is shown.3. Touch the required Program Type (e.g. NEWS). 4. The radio will seek for stations with the Program Type NEWS. If a NEWS station is found, NEWS will be displayed on the Screen below the corresponding radio station.

Infotainment System 17Audio PlayersCD PlayerYour infotainment system may be equipped with a CD player or a virtual CD changer (VCDC).Compact disc player (CD player)If your infotainment system is equipped with a single CD player you can only play one CD at a time.Virtual Compact Disc Changer (VCDC player)If your infotainment system is equipped with a virtual CD player you can store CD’s in the internal memory of your infotainment system and play every single CD like in any regular CD changer.WarningIf a label is added to a CD, or more than one CD is inserted into the slot at a time, or an attempt is made to play scratched or damaged CD’s, the CD player could be damaged. While using the CD player, use only CD’s in good condition without any label, load one CD at a time, and keep the CD player and the loading slot free of foreign materials, liquids, and debris.MP3On your CD player you can also play MP3 files. The total number of files and folders that can be searched is limited to a pre-defined value.● The maximum entries per folder is 255 (entries can be folders or files).● The maximum numbers of playable files is 999. ● Additional files and folders will be ignored.Root DirectoryThe root directory is treated as a folder. All .mp3 files in the root directory are accessed before folders in the root directory.Empty Directory or FolderEmpty folders and directories will not show on the display. The system will ignore empty directories and folders and advance to the next directory or folder that has .mp3 files in it.No FolderOn a CD that contains only .mp3 files in the root directory the next and previous folder functions do not work.

18 Infotainment SystemFile System and NamingThe infotainment system shows track names that are shorter than 39 characters, names that are longer will be shortened. The radio will show the track name as:● The song name that is in the ID3 tag.● The file name without the file extension if the song name is not in the ID3 tag.

Infotainment System 19CD PlayerGeneral informationThis is a Cass 1 laser product. WarningAvoid inserting any foreign objects into the slot of this player. Failure to observe this may cause malfunction due to the precise mechanism of this unit.Information on disc formatsThe CD player supports the following kind of discs:● Mixed Mode CD’s● Copy Protected CD’s● CD-Audio (CD-DA)● CD-R● CD-RWThe CD player supports the following media types:● CD-Audio (CD-DA) according to the Red Book standard.CD-R/RW (in accordance with Orange Book, part 2/3)Multi-session CD (in accordance with multi-session CD specification 1.0).● MP3● WMAPlease note:● Only closed session discs can be read. Open session discs will be ignored. The message Disc Error will be displayed.● If a disc is erroneous (unreadable formats, unsupported formats, no tracks), then Disc Error message is displayed for 2 seconds and the disc is ejected.● Depending on the type of CD-R/CD-RW CDs, certain CDs may not operate normally according to manufacturing companies or making and recording methods. In such circumstances, if you still continue to use those CDs, they may cause the malfunction of your car audio system.

20 Infotainment SystemPlaying an incompatible Copy Protected Audio CDSome copy protected CDs which do not comply with the international audio CD standards (Red Book), may not play on your car audio. Please note that if you try to play copy protected CDs and the CD player does not perform correctly the CDs may be defective, not the CD player.Handling CDs● Avoid leaving fingerprints on the CD when removing it.● Always store any CDs in their protective covers.● Always ensure that CDs are clean and dry before inserting.● Protect CDs from heat and direct sunlight.Cleaning the unitDo not clean using cleaning fluid, alcohol or other solvents. Use only a damp cloth.Inserting a CD1. Insert an Audio CD into the CD slot. Loading CD appears on the Screen. The first track of the CD is played automatically.Ejecting a CD1. Touch to eject a CD from the CD slot. Eject CD appears on the Screen.Pausing/Playing a CDTouch to pause the CD.Touch to play the CD.Go to the next or previous track1. Press the button or soft key to go to the next track.Replay the current track.1. Press the button or soft key to replay the current track.Go to the previous track1. Press the button or soft key twice within 5 seconds to select and play the previous track.Fast Forward/BackwardWith this function you can advance the track being played forward and backward.1. Press and hold either the or button or soft key to fast-forward or fast-backward the current track, or

Infotainment System 21Scan Track1. Touch More to open the options menu.2. Press Intro Scan to activate the Scan Track option. The next track is selected and played for 10 seconds then the following track is played for 10 seconds until the starting track is reached.Playing an MP3 CDBrowsing the Media List and playing a TrackWith this function you can browse and navigate through the Media List, select a track and play it.1. Insert a MP3 CD into the CD slot. Loading CD appears on the Screen. The first track of the CD is played automatically, the Song Title, Artist Name and Album Name are shown.2. Touch Browse to open the file list, MP3 files and folders appear.3. Touch ▲ or ▼, or rotate the Tune knob left or right to scroll the files and folders.4. Touch the title, to play the title or touch the folder, to open the folder.5. Touch Back to leave the menu.Repeat current track/folder/OffWith this function you can repeat the current folder or track, and you can switch off this function.1. Touch Repeat to repeat the current track.2. Touch Repeat twice to repeat the current folder.3. Touch Repeat 3 times to switch Off the Repeat folder/file function.Random Disc ON/OFFWith Random disc ON, all tracks on the CD are played in a non-sequential order without the same track repeated before all other tracks are played.1. Touch the CD tab on the Touch screen.2. Touch the More soft key, then touch Random to switch Random play On or Off.

22 Infotainment SystemVirtual CD Changer (if available) (CD-DA only)Notes on Virtual CD● The Infotainment system will only store audio CD’s into the VCDC. MP3 and WMA files on a CD cannot be stored into the VCDC.● The Infotainment system will stop CD playback while storing the audio CD into the VCDC.● The Infotainment system will always start playback from the first track after storing the audio CD into the VCDCStoring an Audio CDWith this function you can copy an entire Audio CD into the flash memory. 1. Insert an Audio CD in the CD slot. The first track of the CD is played. 2. Touch Store CD. The currently playing disc will be stored in a free slot. A pop up appears that shows the storage process. The number of remaining empty slots is also shown.3. Touch Stored CDs tab to view all discs stored in the memory.Notes on storing CD’s:● When pressing the Stored CD tab with no discs stored in the memory, the information No stored discs is displayed.● Playback of the Audio CD will not be available while the disc is being stored.Renaming a disc1. Touch the Stored CDs tab.2. Touch the Discs soft key, the list with memorised CD is shown.If the disc, you want to rename is not shown in the list, touch ▲ or ▼, or rotate the TUNE knob left or right to scroll through the stored CDs.3. Touch the disc you want to rename.4. Touch Rename and the keyboard appears.5. Use the keyboard to enter the new name.6. Press OK to confirm the changes. The pop up Disc Renamed appears.7. Press OK.

Infotainment System 23Deleting a Disc1. Touch the Stored CDs tab.2. Touch the Discs soft key, the list with memorised CD is shown. If the disc, you want to rename is not shown in the list, touch ▲ or ▼, or rotate the TUNE knob left or right to scroll through the stored CDs.3. Touch the disc you want to delete.4. Press the Delete soft key, the Delete *** pop up appears.5. Press OK to confirm the deletion of that CD title.After deletion the corresponding slot shows <No Disc>.Deleting All Discs1. Touch the Stored CDs tab on the Touch screen.2. Touch the Discs soft key, the list with memorised CD is shown.3. Press the Delete soft key.4. Press the Delete All soft key, the Delete All Discs ? pop up appears.5. Press OK to confirm the deletion of all CDs.After deletion all slots show <No Disc>.Playing a track from a stored disc1. Touch the Stored CDs tab on the Touch screen.2. Touch the Discs soft key, the list with memorised CD is shown.If the disc, you want to view is not shown in the list, touch ▲ or ▼, or rotate the TUNE knob left or right to scroll through the stored CDs.3. Touch the disc you want to play.4. Touch the track you want to play.Playback of the disc will commence from that track.

24 Infotainment SystemAUXILIARY DEVICESGeneral InformationYou can connect auxiliary devices like an iPod to your infotainment system. All media types that are supported by the iPod can be played.The Auxiliary Input Connector (3.5 mm plug) is located under the lid of the centre console, next to the USB connector.WarningThe newly introduced iPod with new firmware may not be 100% compatible and may not be supported by the system.Connecting an iPod1. Connect the IPod by means of the USB cable, delivered with the iPod, to the USB port of your infotainment system. The iPod is automatically detected by the system.2. The iPod Connected... pop up appears on the screen.3. The iPod menu appears on the screen and the iPod is now the current source.4. The Infotainment system plays the track last played on the iPod. If there are no playable tracks in the iPod, the message No songs in iPod is displayed and the previously used source will be selected.If the connected iPod is not working or the system is not able to detect the iPod, the message iPod ERROR appears and the previously used source will be selected.Disconnecting the iPod1. Unplug the iPod from the Infotainment system.2. The iPod Disconnected... pop up appears on the screen.Please connect iPod will appear for a few seconds and the previously used source will be re-selected.Searching for a Song via the Playlists1. Touch Browse, the iPod Music menu appears, showing:● Playlists● Artists● Albums● Songs● Genres2. Touch the Playlists option.The playlists appear on the screen.3. Touch ▲ or ▼, or rotate the tune knob left or right to scroll the playlists.

Infotainment System 25Searching for a Song via the Albums list1. Touch Browse. 2. Touch the Albums option.The list of Albums appears on the screen.3. Touch ▲ or ▼, or rotate the tune knob left or right to scroll the list albums.4. Touch the album name you want to listen to.5. To play the first song touch the first song on the screen or touch ▲ or ▼, or rotate the tune knob left or right to scroll list of songs and touch the song you want to play.4. Touch the playlist you want to open.5. Touch ▲ or ▼, or rotate the tune knob left or right to scroll this playlist and touch the track you want to play.Searching for a Song via the Artist list1. Touch Browse.2. Touch the Artists option.The list of Artists appears on the screen.3. Touch ▲ or ▼, or rotate the tune knob left or right to scroll the artists list.4. Touch the artist name you want to listen to.5. Touch the All Songs soft key.6. Touch ▲ or ▼, or rotate the tune knob left or right to scroll list of songs and touch the song you want to play.Searching for a Song via the Songs list1. Touch Browse. 2. Touch the Songs option.The list of Songs appears on the screen.3. Touch ▲ or ▼, or rotate the tune knob left or right to scroll the Songs list.4. Touch the Song you want to play.

26 Infotainment SystemSearching for a Song via the Genres list1. Touch Browse. 2. Touch the Genres option.The Genres list appears on the screen.3. Touch ▲ or ▼ to scroll the Genres list.4. Touch the Genre you want to play.5. Touch All Albums.6. Touch All Songs.7. To play the first song, touch the first song on the screen or touch ▲ or ▼, or rotate the tune knob left or right to scroll the list and touch the song you want to play.Playing Songs in Random orderWith this option switched On, songs in the iPod are played in random order.1. To switch Random play On/Off touch Random on the iPod tab.Playing a Song in Repeat modeWith this option switched On, the currently played song will be repeated until this mode is switched Off.1. To switch Repeat play On/Off touch Repeat on the iPod tab.Pausing/Playing the iPod1. Touch to pause the iPod.2. Touch to play the iPod.

Infotainment System 27USB DevicesGeneral InformationYou can connect USB devices like a USB Stick to your infotainment system. The USB connector is located under the lid of the centre console.Warning W e strongly recommend only using USB sticks (thumb drives) of well-known manufacturers. O n no account must other USB devices such as hard discs or other digital equipment or multi plug USB hub be connected to the USB hub. Connecting other devices can cause malfunction or even destroy the audio equipment.Avoid using the USB memory when it might hinder your safety driving.●●●WarningIt is possible that noise is heard during playback when using the AUX-IN together with the power outlet due to system-related not a malfunction. If this happens, use the power source of the AUX device.In rare cases it is possible that an USB stick (thumb drive) is not recognized by the unit or may cause a malfunction. Please only use USB sticks that comply with the USB thumb drive specifications.●●Notes on USB:Due to constant changes of USB products in the market and their respective Software, it can be possible that some of the USB devices are not compatible with this infotainment system.To ensure good compatibility with the infotainment system the file system for the USB devices should be FAT32.The following file formats with the file extension *.mp3 or *.wma are supported:● MP3 (MPEG 1 Layer 3)● WMA (Windows Media Audio)The total number of files and folders that can be searched is limited to a pre-defined value.The MP3 player is able to read and play a maximum of:● The maximum entries per folder is 255 (entries can be folder or file).● The maximum numbers of playable files is 999. ● Additional files and folders will be ignored.

28 Infotainment SystemDisconnecting the USB device1. Remove the USB device from the Infotainment system.2. The Media Disconnected... pop up appears on the screen and previously used source will be re-selected.Pausing/Playing a song1. Touch to pause the song.2. Touch to continue playing the song.Go to next track1. Touch go to the next track.Replay the current track.1. Touch the button or soft key to replay the current track.Go to the previous track1. Touch twice within 5 seconds to select and play the previous track.Connecting a USB device to the Infotainment system1. Connect the USB device to the infotainment system.The USB device is automatically detected by the system.2. The Reading Media .... pop up appears on the screen.If there are no playable tracks in USB device, the message USB Device Empty appears and the previously used source will be selected.3. The USB menu appears on the screen and USB is now the current source.4. The Infotainment system plays the first track in the Root directory. Fast Forward/BackwardWith this function you can advance the track being played forward and backward.1. Touch and hold either or to fast-forward or fast-backward the current track, orRepeat current track/folder/OffWith this function you can repeat the current track or folder, and you can switch off this function.1. Touch Repeat to repeat the current track.2. Touch Repeat twice to repeat the current folder.3. Touch Repeat 3 times to switch Off the Repeat track/folder function.

Infotainment System 29Random folder/ Random all/ Random offWith this function you can play the folder or all tracks at random and you can switch off this function.1. Touch More to play the tracks in the current folder at random.2. Touch More again.3. Touch Random twice, to play all tracks at random.4. Touch More again.5. Touch Random 3 times to switch Off the Random folder/Random all function.Go to next/previous folderWith the buttons on the infotainment system you can select the next or previous folder.1. Press either the or button on the infotainment system to select the next or previous folder. The first track in the folder will be played.Browsing the Media List and playing a TrackWith this function you can browse and navigate through the Media List, select a track and play it.1. Touch Browse in the USB tab. The folders and tracks available on the USB device will be shown in a list.2. Touch ▲ or ▼, or rotate the TUNE knob left or right to scroll through the tracks and folders.3. Touch the track, to play the track or touch the folder, to open the folder.

30 Infotainment SystemBluetooth AudioGeneral InformationOn your infotainment system you can play audio from your Bluetooth device. Before you can upload audio, the Bluetooth device must paired with the Infotainment system (see chapter Bluetooth).Playing/Pausing a song1. Press the Media button on the head unit or the AUDIO button on the SWRC to select BT Audio.The BT Audio tab appears on the touch screen, showing that Bluetooth Streaming... has started.2. After Bluetooth streaming is completed, the first track will play automatically.3. Press the soft key to pause the song.4. Press the soft key to continue playing the song.Go to the next track1. Press the button or soft key to go to the next track.Replay the current track1. Press the button or soft key to replay the current track.Go to the previous track1. Press the button or soft key twice within 5 seconds to select and play the previous track.

Infotainment System 31Rear Seat Entertainment/Audio System (RSE/RSA)GeneralYour car may have a CD/DVD Rear Seat Entertainment/Audio (RSE/RSA) system. The RSE/RSA system works with the car’s infotainment system.The RSE/RSA system includes a CD/DVD player, a display screen AUX-jacks, two headphones, and a remote control.Depending on the type of RSE/RSA in your car, you may have the high series system with:• Two adjustable display screens mounted in back of the front seat head rests,• Roof mounted DVD player,• Rear control panel,• Aux Video/Audio input jack,• USB input jack,• Head phone jacks,• Remote control,• Two pairs of IR headphones.A B C D EHI G FABDEGHIJKHigh seriesLow seriesOperating Elements RSE/RSAA. , Power button.B. MODE button.C. button.D. /Eject buttonE. button.F. button.G. button.H. Head phone button.I. MENU button.J. Stop button.K. button.L. AUX connector.or:• One single roof mounted fold down display screen.• Roof mounted DVD player.• Rear control panel.• Remote control. • Two pairs of IR headphones. • Aux Video/Audio input jack,• USB input jackThe RSE/RSA system also has a Parental Control feature to protect minors.

32 Infotainment SystemUsage1. Push the release button on the screen.2. Place the screen to the desired position.Adjusting the DVD Video Brightness1. Press the Video Brightness button.2. Press the - or + button to adjust the video brightness.Playing a DVDThis function starts playback of the DVD from the RSE DVD.1. Insert the DVD into the RSE- DVD drive and press to play the DVD.Notes:● If the DVD is ejected whilst playing, the system remains on DVD source until another source is selected.● If there is an incoming phone call when DVD is playing on full screen size, the system exits the full DVD screen and switches to phone view and DVD playback is paused.● Viewing a movie on the Front display is only possible at car speeds < 3 km/h. When driving the picture will be replaced by the information Image not available while driving.Pausing a DVD1. Press , to pause a playing DVD.2. Press again, to restart playing of the DVD.Stopping a DVD1. Press on either the RSE unit or the head unit, to stop playing the DVD. Or2. Press the MEDIA button and select another source. If the source is changed whilst the RSE DVD is played, the DVD playback stops and the current play position is remembered. This will be recalled when the RSE DVD is selected again.Selecting the Next/Previous Chapter1. Press to select he next chapter.2. Press to select the previous chapter.

Infotainment System 33Seeking fast forward/backwardYou can seek with x2, x4, x8, x16 or x32 the speed, depending on who often you press the seek button.1. Press to seek fast forward.2. Press to seek fast backward.Navigating through the DVD Menu1. Press Menu to select the DVD Menu.2. Press the navigating buttons to navigate within the DVD.

34 Infotainment SystemBluetooth®General InformationBluetooth® allows users with a Bluetooth® enabled mobile phone to make and receive hands-free calls using the vehicle’s audio system and controls. Bluetooth will also allow users to stream music files from their device if available.The Bluetooth® enabled mobile phone must be paired with the in-vehicle Bluetooth® system before it can be used in the vehicle. Not all phones will support all functions.For more information visit:www.holden.com.au.WarningDon‘t use a mobile phone when you are driving. Make sure that Bluetooth (if available) is activated before driving.If not you must stop at a safe place to use a mobile phone.••PairingA Bluetooth® enabled mobile phone must be paired to the in-vehicle Bluetooth® system first and then connected to the vehicle before it can be used. See the mobile phone manufacturers user guide for Bluetooth® functions before pairing the mobile phone.● Up to five mobile phones can be paired to the in-vehicle Bluetooth® system.● The in-vehicle Bluetooth® system automatically links with the first available paired mobile phone in the order the phone was paired.● Only one paired mobile phone can be connected to the in-vehicle Bluetooth® system at a time.● Pairing should only need to be completed once, unless changes to the pairing information have been made or the phone is deleted.

Infotainment System 35Pairing a Bluetooth® Device with the Infotainment system1. Switch the Bluetooth® device On and prepare it for pairing with the head unit. 2. Press the CONFIG button on the head unit.3. Touch the Bluetooth tab on the touch screen.4. Touch Pair New Device.The pop up Searching for Bluetooth Devices appears.5. The detected Bluetooth® devices are shown.6. Touch the detected Bluetooth® device. The pop up Enter code XXXX into device appears.7. Enter the shown code into the mobile phone to start pairing.If pairing failed, the pop up Pairing Failed appears on the touch screen.If pairing was successful, the pop up Pairing Completed appears on the touch screen.Bluetooth® Pairing Initiated via the mobile phone (In Non Map View)1. Enter the Bluetooth menu.2. Touch Activate Discoverable Mode.3. The pop up Discoverable for 5 minutes appears.4. Use your mobile phone to pair it with the infotainment system.The mobile phone generates a four digit pass code.5. Enter this code in the pop up Enter Code.6. Press the OK soft key to pair the device.7. After pairing, the pop up Pairing Complete will appear.8. Press OK to confirm pairing.8. Pairing is now completed. You can add up to 5 devices to the Paired Devices list.Deleting a Bluetooth® Device1. Press the CONFIG button on the head unit.2. Touch the Bluetooth tab on the touch screen. The list of paired devices is shown.3. Touch the mobile phone you want to delete.4. Press the Delete soft key to delete the selected device. The pop up Delete YYYY Phone appears.5. Press the OK soft key to delete the previously selected device.The corresponding device will be deleted from the Paired Devices list.

36 Infotainment SystemConnecting another Bluetooth® DeviceYou can connect another Bluetooth® device and disconnect the currently paired device without deleting the device from the Paired Devices list.1. Switch the new to be paired Bluetooth® device On and prepare it for pairing with the head unit. 2. Press the CONFIG button on the head unit.3. Touch the Bluetooth tab on the touch screen. The Paired Devices appears on the touch screen.If there is a current connection, the device is marked with an asterisk on the outer right hand side.4. Touch the Device to be paired on the Paired Devices list.The pop up Connect “XYXY” ? appears.The currently connected device will be disconnected.5. Press OK.The pop up Disconnecting appears, you might be asked to enter the code into the mobile phone.6. The pop up Connecting of the new paired device appears.7. If pairing was successful, the pop up XYXY is connected. appears on the touch screen.8. Pairing of the new device is now completed.Auto-connecting a Bluetooth® Device1. Switch the Bluetooth® device On.2. Switch On the Infotainment system. Bluetooth® is searching for an automatic connection with the device in the Paired Device list.3. After pairing is completed, the pop up Device ‘XXXX’ is connected. will appear.Accepting/Rejecting an Incoming Phone CallWhen an incoming call is received, audio from the infotainment system is muted and a ring tone sounds via the car speakers. The callers phone number appears on the touch screen in the Bluetooth® Phone tab.1. Touch the PHONE button on the screen or press the button on the Steering Wheel Control to accept the call.On the Bluetooth® phone touch screen the information Call in Progress, as well as the callers phone number and the time of the connection are displayed.2. If you want to reject the incoming call, touch the HANG UP button. Ending a Call1. Touch HANG UP or press to terminate a call.

38 Infotainment SystemMaking a Call from the Missed Calls listWith this feature you can access you phone‘s missed call list through the infotainment system.Note: Please refer towww.holden.com.au/bluetoothfor phones that support this feature.1. Activate the Phone menu screen.2. Touch More.3. Touch Call History.The Dialled Calls list is shown on the phone menu screen.4. Touch Missed Calls. 5. Touch the name of the person, who’s call you missed and you want to call back.If the name of the person is not visible in the list, press ▼ or ▲, or rotate the Tune knob left or right to select the person from the Missed Calls list. After the selection the pop up Call XYX appears.6. Touch OK to start dialling.Making a Call from the Answered Calls listWith this feature you can access you phone‘s answered call list through the infotainment system.Note: Please refer to:www.holden.com.au/bluetoothfor phones that support this feature.1. Activate the Phone menu screen.2. Touch More.3. Touch Call History.The Dialled Calls list is shown on the phone menu screen.4. Press the Answered Calls soft key. 5. Touch the name of the person who you want to call back.If the name of the person is not visible in the list, press ▼ or ▲, or rotate the Tune knob left or right to select the person from the Answered Calls list. After the selection the pop up Call XYX appears.6. Press OK to start dialling.Making a Call from the Dialled Calls listWith this feature you can access you phone‘s dialled call list through the infotainment system.Note: Please refer to:www.holden.com.au/bluetoothfor phones that support this feature.1. Activate the Phone menu screen.2. Touch More.3. Touch Call History.The Dialled Calls list is shown on the phone menu screen.4. Touch the name of the person, you want to call from the Dialled Calls list.If the name of the person is not visible in the list, press the ▼ or ▲, or rotate the Tune knob left or right to select the person from the Dialled Calls list. After the selection the pop up Call XYX appears.6. Touch OK to start dialling.

Infotainment System 39Making a call from voice tag (if available)1. Press the button on the infotainment system or the steering wheel controls twice to trigger the voice tag. The Phone screen appears showing the message Say Name.2. Speak the Name of the Contact you want to call.3. The phone will proceed to dial the voice tag requested.4. After having finished the call the to the previously selected source.Receiving a discrete phone call in map viewThe ring tone is audible via the car speakers and Voice In appears Audio Status bar.1. Press the PHONE button on the steering wheel controls to accept the call.

40 Infotainment SystemRear View Cam (if available)General InformationYour infotainment system is connected to a rear view camera. When you engage the reverse gear the display shows the image of the situation behind your car.Activating/Deactivating the Rear View Cam1. Press the CONFIG button.2. Touch Rear View Camera.3. Touch On or Off to either switch the Rear View Camera On or Off.4. Touch Back to return to the previously selected source.

Infotainment System 57HELP SystemGeneral InformationYour infotainment system is equipped with a Help system to assist you when operation your system. Activating/Deactivating the Help feature1. Press the button to open the Help tab.2. To get help on Features touch Feature Help.3. To get Help on operating buttons, touch Button Help.4. To leave the Help feature, touch Close.Help on FeaturesVia Feature Help you can access help topics on features, These help topics are subdivided into main and sub topics.The main topics are:● Radio;● Radio configuration;● Media:● Aux;● Bluetooth Phone;● Bluetooth Pairing;● Navigation;● Navi Configuration● Traffic,● Configuration;● STATUS BARSelecting Help on Features1. Press the button to open the Help tab.2. Touch Feature Help.3. Touch ▲ or ▼, or rotate the TUNE knob left or right to browse the main topic list.4. Touch the main topic you require information about.5. Touch ▲ or ▼, or rotate the TUNE knob left or right to browse the sub topic list.6. Touch the sub topic you require information about.7. If highlighted, touch ▼, or rotate the TUNE knob right to select the second page of this very sub topic.

58 Infotainment System8. Touch Back to exit the screen.Help on ButtonsVia Button Help you can access help topics on the button functions.The button functions are:● MUTE;● EJECT;● RADIO;● MEDIA;● AUX;● PHONE;● HELP;● NAV;● MAP,● BACK;● POWER;● LEFT ROTARY;● RIGHT ROTARY;● TRACK UP / DOWN;● FOLDER NEXT / PREV.Selecting Help on Buttons1. Press the button to open the Help tab.2. Touch Button Help.3. Touch ▲ or ▼, or rotate the TUNE knob left or right to browse the button function list.4. Touch the button function you require information about.5. Touch Back to exit the screen.

Infotainment System 41NavigationYour vehicle is equipped with a Navigation System that allows you to plan a route and provides map guidance with voice prompts during driving.But it is possible that the information in the system may not always be up-to-date. Road conditions, such as detours, road construction works and posted speed limits change frequently. It is important to consider whether or not you can safely and legally follow the directions given by the system. The system may also interact with the radio to receive broadcast announcements on trafc and emergency alert communications.General InformationBefore you begin to operate this system, please read this document thoroughly to familiarize yourself with the system controls and operation. That way, you will be able to use this system with less effort and less distraction from the road.If an inoperable function is selected, the system may display a message indicating that the function is not available. ● WarningGiving extended attention to navigation tasks while driving will greatly increase the risk of a collision that may cause personal injury or death. Road safety has absolute priority! Only operate this system if the road and trafc conditions allow you to do so. The driver‘s full attention is always required while driving. Use voice guidance directions whenever possible!

42 Infotainment SystemMap display14567891312112115103 41. Name of the Road to turn into (next change of direction)2. The plan route highlighted in white.3. Compass : The arrow points north. Touch this icon to toggle the map appearance between North Up, Heading Up or 3D Map view.4. GPS : Status of the GPS reception. Green indicates at least 4 satellites are available. Yellow indicates at least 3 satellites are available. Red indicates no satellite is available.icon is red in colour. Note: the documented displayed speed limit may vary from the current posted speed limit.12. Zoom out13. Zoom in14. Current time15. Touch this to switch between current mode and clock display.Destination ag1716 1816. Current Position icon: The scroll map function allows user to view other part of the map which is not currently visible. Tap on the point on the map and the systems 5. Selected map scale. Touch this to hide or view the graphical presentation of the direction of travel.6. Turn-off prompt: A graphic display of the next junction or turn -off. In addition, directional changes are announced with voice guidance. Touch this graphic display to repeat the voice guidance.7. Estimated arrival time.8. Distance to the next change of direction.9. Touch to stop the guidance.10. Vehicle position, arrow indicates current direction of travel.11. Road speed limit icon (only when speed limit data is available on current road). If vehicle speed is below the designated road speed limit, icon is grey in colour. If vehicle speed is above the designated road speed limit,

Infotainment System 43bring that point to the centre of the screen. Touch the car position icon to to go back to the current car position.17. After a route has been planned a destination ag (depending on the scale of the map display) will appear on the map to show your destination.18. Select desination from map: This function allows you to select any point on the map and takes the address of the selected point as destination address.Navigation mapsThe navigation maps are stored on a SD-card in the infotainment system. If you need to update the maps, please contact your GMH dealer.Conguring the Navigation SystemYou either can change the Conguration Settings or view Navigation Information via Nav Cong. option.Available are:Appearance of the map;Auto Zoom On or Off;Trafc Management Settings;Points of Interest;Alert Points;Alert Feedback On or Off;Speed Limit Warnings On or Off;GPS Status;System Information●●●●●●●●●Entering the Navigation Conguration Menu1. Press the NAV button.2. Touch the Nav Cong tab.3. Touch ▼ or ▲ to select next or previous page of Navigation Conguration menu.Map AppearanceWith this setting you can change the appearance of the map on the screen.1. Touch Map Appearance, to change the appearance of map according to your personal needs: Map Facing: either Heading Up or North Up. Map View: either 2D or 3D (not selectable in North Up view). Brightness Mode: either Day, Night or Auto.2. Touch Back to save the settings and to return to the previous screen.

44 Infotainment SystemAutomatic ZoomWith Automatic Zoom switched On the navigation system will automatically zoom in on the approaching manoeuvre point, showing the map more detailed.1. Touch Auto Zoom.2. Touch either On or Off to switch Automatic Zoom on or off.3. Touch Back to save the settings and to return to the previous screen.Viewing the GPS StatusWith this option you can look up the status and accuracy of the GPS signal. 1. Fix : - Searching indicates that the system is searching for satellite. - Tracking indicates that system nds less than 3 satellites & starts to evaluate the signal quality of the satellites found. - “2D Fix” indicates that there are minimum 3 available satellites to calculate the position. - “3D Fix” indicates that there are at least 4 available satellites with good signal quality.2. Current No of Satellites : This indicates the number of available satellities.3. HDOP (GPS Accuracy) : This numeric value indicates the quality of the satellite reception. The lower the value, the better is the reception quality.4. Current GPS speed: This is the calculated vehicle speed based on the GPS satellite tracking signal. 5. Latitude/Longitude: This indicate the current position of the vehicle on the globe, this information is also based on the GPS sattelite signals. To view this information:1. Press the NAV button.2. Touch the Nav Cong tab.3. Touch GPS Status.4. Touch Back to exit and to return to the previous screen.System InformationWith this option you can view the System Information of the Navigation System, like Platform, Software version and Map Database.1. Press the NAV button.2. Touch the Nav Cong tab.3. Touch System Information.4. Touch Back to exit this and to return to the previous screen.Trafc Message Channel (TMC)Trafc Message Channel (TMC) is a technology for delivering trafc and travel information to drivers. It is digitally coded using the FM-RDS system on conventional FM radio broadcasts.Note: Trafc information is only available in areas where it is specically provided by local FM radio stations, therefore may not be available on some areas or towns.

Infotainment System 45Trafc GuidanceThis navigation system processess TMC trafc information and inform you about the trafc condition via pop up messages and voice announcement.You have the option to adapt the Trafc Management Settings to your preferences.RDS-TMC - Automatic(default setting)The Navigation System will automatically select the best TMC station.RDS-TMC - Preferred(default setting)You can select a preferred TMC station from a list of available TMC stations (only when the area has more than one radio station providing trafc information).Trafc Avoidance - Automatic (default setting)The Navigation System will automatically calculates a more favourable route than the current plan route, taking into account of the trafce events.Trafc Avoidance - ManualDynamic Route Guidance is switch on to inform you of a trafc event on the plan route and give you the option to re-route or to stay on the current plan route. Trafc Avoidance - OFFDynamic route guidance is switch off and the system will not process any TMC trafc information.Trafc Management Settings1. Press the NAV button.2. Touch the Nav Cong tab.3. Touch Trafc Management Settings.Trafc Avoidance4. Touch either Auto or Manual to enable Dynamic Route Guidance.5 or touch Off to disable Dynamic Route Guidance Note: RDS-TMC function is disable with Trafc Avoidance Off.RDS-TMC6 Touch either Automatic or Preferred accordingly to your requirements.7. Touch Back to save the settings and to return to the previous screen.Conguring the Point Of Interest (POI) SettingsWith this setting you can select POI’s you would like to display on the map.1. Press the NAV button.2. Touch the Nav Cong tab.3. Touch ▼ to select the second Navigation Conguration page.

46 Infotainment System4. Touch POI Selection.5. Select the Points of Interest you want to display; the selected POI is indicated with an *.6. Touch ▼ or ▲ to select the next or previous page.7. After selection, touch Back to exit and to return to the previous screen.Conguring Alert Points and Alert FeedbackWith this setting you can switch the alert function on/off. This function warns you about when approaching an alert point.With All Screens selected, a pop-up message together with audio feedback will alert you on all infotainment screens.With Map Screen selected, a pop-up message together with audio feedback will alert you on map screens only.When Off is selected, no alert information will be given.Please note: During a phone call only a pop-up will appear on the screen without any audio feedback.Alert information is available on Railway Crossings, Speed & Red Light cameras (Safety cameras) and School Zones.Conguring Alert Points1. Press the NAV button.2. Touch the Nav Cong tab.3. Touch ▼ to select the second Navigation Conguration page.4. Touch Alert Points.5. Select the Alert Points as required.6. After selection, touch Back to exit and to return to the previous screen.Conguring Alert Point Feedback (Audio Chime)1. Press the NAV button.2. Touch the Nav Cong tab.3. Touch ▼ to select the second Navigation Conguration page.4. Touch Alert Point Feedback.5. Touch the corresponding button to switch Alert Point Feedback On or Off.5. After selection, touch Back to exit and to return to the previous screen.Conguring Speed Limit WarningsWhere available, the Navigation system displays the documented speed limit for the current road.If the vehicle speed is less than the documented speed limit, then the speed icon will be grey.If the vehicle speed is greater, then the speed icon will be coloured.There is no audio alert with this warning.Note: the documented displayed speed limit may vary from the current posted speed limit.This feature is available in guidance and non-guidance modes.

Infotainment System 471. Press the NAV button.2. Touch the Nav Cong tab.3. Touch ▼ to select the second Navigation Conguration page.4. Touch Speed Limit Warnings.5. Touch the corresponding button to witch Speed Limit Warnings On or Off.6. After selection, touch Back to exit and to return to the previous screen.NavigationYou can enter all navigation information into the navigation system by means of the integrated keyboard.Entering a Destination AddressWith this option you can enter a destination address.1. Press the NAV button and touch the Dest Input tab.2. Touch Enter Address.3. Touch Country, then enter the country’s name or enter the rst letter(s) and touch List to select the country from the list.4. Touch City, then enter the name of the city or enter the rst letters and touch List to select the city from the list.Hint: You can enter a Suburb name or a City name (to cover a larger search area).5. Touch Street, then enter the name of the street or enter the rst letters and touch List to select the street from the list.6. Touch Intersection, then enter the name of the street or enter the rst letters and touch List to select the street from the list.6. Touch Back to exit and to return to the previous screen.Entering an Address via its Geographical Co-ordinatesWith this option you can enter an address using its Latitude and Longitude. The geographical coordinates have to be entered in the corresponding elds.1. Press the NAV button and touch the Dest Input tab.2. Touch Enter Address.3. Touch More.4. Touch Input via Co-ords.5. Enter the geographical coordinates using the keyboard.6. If required touch S to switch to N and vice versa for E to W.7. Touch Map Route.8. The Calculating Route pop-up appears.9. When the calculation is completed, the map screen is shown.10. Touch Back to exit and to return to the previous screen.11. Touch Start Guidance to exit and to return to the previous screen. The system is ready for departure.

48 Infotainment SystemSaving an Address as a Favourite (any Favourite, Home or Work)You can save an entered destination address as a general Favourite or Home or Work address.1. Press the NAV button and touch the Dest Input tab.2. Touch Enter Address to enter a new or select an existing address.3. Touch More.4. Touch Save as.5. The Save As pop-up appears asking you to save this address under Favourites, Home or Work.6. Touch Favourite, to save the Destination or touch Cancel to return to the previous screen.Renaming an AddressWith this option you can rename any destination address in the favourites list, except <Home> and <Work>.1. Press the NAV button and touch the Dest Input tab.2. Touch Choose Favourites3. Touch Rename, then touch the entry you want to rename.4 Enter the new name by means of the keyboard.5. Touch OK, the previous selected entry will be renamed and will appear under its new name in the Favourites List.Deleting a certain Address from the Favourites ListWith this option you can delete a destination address from the favourites list.1. Press the NAV button and touch the Choose Favourites tab2. Touch Delete.3. Touch the Entry you want to delete from the Favourites List.4. The Delete Favourites pop-up appears.5. Touch OK, the selected entry will be deleted from the Favourites List.Deleting all Addresses from the Favourites ListWith this option you can delete all destination addresses from the favourites list.1. Press the NAV button and touch the Choose Favourites tab2. Touch Delete, then touch Delete All .3. The Delete All Favourites pop-up appears.4. Touch OK to delete all entries from the Favourites List.Viewing a Destination Address on the MapWith this option you can view the location of a Destination Address on the map.1. Select the Destination Address you want to view on the map via the Dest Input tab.2. Touch Show Address. The map appears.

Infotainment System 49history list.1. Press the NAV button and touch the Dest Input tab.2. Touch Choose History.3. If you want to select an address, touch the corresponding address.4. Touch ▼ or ▲ to select next or previous page if available.5. If you want to delete all entries from the history list, touch Clear All.6. The Delete All Favourites pop-up appears.7. Touch Back to exit and to return to the previous screen.Points of InterestYou can select Points of Interest either by name or by Category near the current car position or around the destination or near an address.By Name: enter the name of the POI by their known names like Rafes, Merlion, McDaffys Wine Bar, etc..By Category: you can browse The Address is indicated by. With zoom in/out you can zoom in or out on the address.3. Touch Back to exit and to return to the previous screen..Selecting an Address from the Favourites ListWith this option you can select a Destination Address from the favourites list.1. Press the NAV button and touch the Dest Input tab.2. Touch Choose Favourite.3. Touch the favourite you want to select, if the favourite is not shown on the rst page, touch ▼ to select the next page.6. Touch Back to return to the previous screen.Selecting or deleting an address from History ListVia the History List you can select a previously entered destination address or delete the complete the POI for ATM, restaurants, Gas stations, Airport, Pharmacy etc.. Points of Interest near the Current Position1. Press the NAV button and touch the Dest Input tab.2. Touch Choose POI.3. Touch Near Current Position.4. Select the POI either By Name or By Category5. Or touch Cancel to exit the pop-up.6. Touch Back to return to the previous screen.Points of Interest near the Destination (Available During Guidance Mode only)1. Press the NAV button and touch the Dest Input tab.2. Touch Choose POI.3. Touch Near Destination.4. Select the POI either By Name

50 Infotainment Systemor By Category5. Or touch Cancel to exit the pop-up.6. Touch Back to return to the previous screen.Points of Interest near an Address (available during non-guidance mode only).1. Press the NAV button and touch the Dest Input tab.2. Touch Choose POI.3. Touch Near an Address.4. Select the POI either By Name or By Category5. Or touch Cancel to exit the pop-up.6. Touch Back to return to the previous screen.Finding an emergency destinationWith this option you can select an Emergency Destination 1. Press the NAV button and touch the Choose Favourites tab2. Touch Emergency.3. Touch the Emergency Destination you want to select from the Emergency List. - Police Stations - Hospitals4. If the Emergency Destination you require is not displayed, touch ▲ or ▼ to select the previous or next page and select it from the list.Changing the selected RouteWith this option you can insert a stage into an existing route or a journy plan. You can Add upto three stages. During active guidance every stage entered will be treated as a new address before the nal destination. With a journey plan a stage is integrated into the route and indicated as an intermediate stage by means of a symbol on the map.Adding/Editing/Rearanging stagesWith this option you can add to a journey, edit an existing stage or reorder entered stages.1. Press the NAV button and touch the Route Pref tab2. Touch Change Route.3. Touch Add/Edit Stage.4. Touch Add, the Add/Edit Stage screen shows the options to select the stage.5. Touch the option you would like to select the stage with or press Back to return to the previous screen.6. If youwant to change the order of the enterd stages touch Reoder Stage.7. If you want to relocate added stages, touch the stage you want to move.8. Then touch eiter Move up or Move down, depending on the stages location.9. Then touch Recalculate Route. A pop-up appears to inform you that the selected route is being recalculated. After recalculation

Infotainment System 51is nished the Map is shown in preview mode. Each stage is indicated by a chequered ag. 10.Touch Back to return to the previous screen.11. Touch Start Guidance, guidance is started and the Navigation screen with the calculated route is shown.12. To cancel Guidance touch Stop Guidance.Deleting a StageWith this option you can delete a stage from an existing route or journey plan.1. Press the NAV button and touch the Route Pref tab2. Touch Change Route.3. Touch Add/Edit Stage.4. Touch Delete Stage, then touch the Stage you want to delete from the list. A popup appears asking you to conrm the selection.5. Touch OK if you want to delete the selected address or touch cancel if you do not want to delete the selection.6. Touch Back to return to the previous screen.DetourWith this option you can set a distance to detour from the current plan route. The system automatically calculates a new route based on the distance to detour.1. Press the NAV button and touch the Route Pref tab2. Touch Detour.3. Touch the distance (marked by *) you wish to detour.4. Touch Clear Detours to clear all setting.5. Touch Back to return to the previous screen.Setting Route Options1. Press the NAV button and touch the Route Pref tab2. Touch Route Options.3. Touch the route option you want to select:Shortest (the route is calculated based on shortest route optimized in distance)Optimum (the route is calculated based on optimized estimated travel distance and estimated travel time with a weighting of 50% driving distance and 50% driving time)Fastest (the route is calculated based on fastest route optimized in time)4. Then select what you would like to avoid:Avoid FerriesAvoid Toll RoadAvoid Highways5. Touch Save Options, to conrm the selections.6. Touch Back to return to the previous screen.●●●●●●

52 Infotainment SystemViewing the Route ListWith this option you can view details of the current journey plan in a list view. This include the addresses of starting point, nal destination and all the streets/roads along the way. If stages are added, they are also included in the list view. When navigation is active and any of the streets have been passed, they will be removed from the list. Note: This option is only availabe when a destination is selected.1. Press the NAV button and touch the Route Pref tab2. Touch Route List.3. Touch the route option you want to view in detail:the Distance to this point. in mthe Length in mthe City:4. Touch ▼ or ▲ to select next or previous page if available.5. Touch Back to return to the previous screen.●●●Viewing the Destination on the mapWith this option you can view the destination selected on the map. Note: This option is only available in Guidance mode and with the route being calculated.1. Press the NAV button and touch the Route Pref tab2. Touch Show Destination, the map with the destination is shown.3. Press the NAV button to return the Route Pref screen.Trafc Message Channel (TMC)Viewing and Updating TMC stationsWith this option you can view available TMC stations and update them if required. 1. Press the NAV button and touch the Trafc tab2. Touch TMC Stations, the screen shows availabe TMC stations. The currently selected TMC station is marked with an asterik.3. Touch Refresh to update the current list. The pop-up Updating TMC Stations will appear on the screen.4. Touch Cancel if you want to cancel the TMC Station search.5. Or touch Back to return to the previous screen.Selecting a TMC stationWith this option you can select your favourite TMC station. 1. Press the NAV button and touch the Trafc tab2. Touch TMC Stations, the screen shows availabe TMC stations. The currently selected TMC station is marked with an asterik.3. Touch the TMC Station you want to select. This TMC station is now marked with the asterik.5. Touch Back to return to the

Infotainment System 53previous screen.Viewing TMC messagesWith this option you can view available TMC stations and update them if required. 1. Press the NAV button and touch the Trafc tab2. Touch TMC Stations, the screen shows availabe TMC stations. The currently selected TMC station is marked with an asterik.3. Touch Refresh to update the current list. The pop-up Updating TMC Stations will appear on the screen.4. Touch Cancel if you want to cancel the TMC Station search.5. Or touch Back to return to the previous screen.TMC events on the mapTMC events on the map during non guidance mode for single direction road.TMC events on the map during non guidance mode for dual direction road.TMC events on the map during guidance mode (Trafc avoidance set to Manual).When there is road congestion on the plan road, TMC icon is red in colour and user can hear voice announcement.A pop up message appear and ask you to re-route.

54 Infotainment SystemA new road is plan when re-route is enter. TMC icon change to grey colour on the non plan route.Simulating a TripWith this feature you can simulate the trip from its current to its nal position along the entered route. The calculated route is highlighted on the map. This function is only available with the car stationary.1. Enter the required destination via the Dest Input tab.2. Touch More.3. Touch Simulate Trip.4. Touch either Current Position or Choose Start Address to select the corresponding address; or touch Cancel the close the pop-up.5. When you touch Current Position, simulation starts directly.6. When you touch Choose Address, you have to enter the starting point as described before, then touch OK.7. A pop-up appears and you will get some voice feedback that the simulation will be started.8. Touch Stop Guidance to cancel simulation.

Navigation menu