Continental Automotive Systems 32296000 Auto Ignition Immobilizer Transmitter User Manual Owners Manual

manual

February 23, 2012

Continental

4685 Investment Dr.

Troy, MI 48098

Phone: 248-764-6712

Fax: 248-764-7226

Re: Certification for Chrysler CUSW RFHM

FCC ID: M3N32296000

IC: 7812A-32296000

PN: 56046805AC

56046811AC

56046812AC

The device under test is manufactured by the grantee Continental and sold as an OEM product.

Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user

has all applicable / appropriate operating instructions. When end-user instructions are required,

as is the case with this product, the grantee must notify the OEM to notify the end-user.

Continental will supply the following information to the reseller/distributor dictating what must be

included in the end user’s manual for the commercial product.

INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL

The following information (in blue) must be included in the end product user’s manual to

ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must

be included in the manual if the device label is not readily accessible to the end user. The

compliance paragraphs (in blue) below must be included in the user's manual.

************************************************************************

FCC ID: M3N32296000 IC: 7812A-32296000

This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt

RSS standard(s). Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) This device must accept any interference received, including

interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne

doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Note: Changes or modifications not expressively approved by the party responsible for

compliance could void the user's authority to operate the equipment. The term “IC:” before the

radio certification number only signifies that Industry Canada technical specifications were met.