Continental Automotive Systems 32297200 Auto Ignition Immobolizer Transmitter User Manual manual
Continental Automotive Systems US Inc. Auto Ignition Immobolizer Transmitter manual
manual
February 23, 2012
Continental
4685 Investment Dr.
Troy, MI 48098
Phone: 248-764-6712
Fax: 248-764-7226
Re: Certification for Chrysler CUSW IGNM
FCC ID: M3N32297200
IC: 7812A-32297200
PN: 56046803AD
The device under test is manufactured by the grantee Continental and sold as an OEM product.
Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user
has all applicable / appropriate operating instructions. When end-user instructions are required,
as is the case with this product, the grantee must notify the OEM to notify the end-user.
Continental will supply the following information to the reseller/distributor dictating what must be
included in the end user’s manual for the commercial product.
INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL
The following information (in blue) must be included in the end product user’s manual to
ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must
be included in the manual if the device label is not readily accessible to the end user. The
compliance paragraphs (in blue) below must be included in the user's manual.
************************************************************************
FCC ID: M3N32297200 IC: 7812A-32297200
This device complies with Part 15 of the FCC Rules and w ith Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l 'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Note: Changes or modifications not expressively approved by the party responsible for
compliance could void the user's authority to operate the equipment. The term “IC:” before the
radio certification number only signifies that Industry Canada technical specifications were met.