Continental Automotive Systems 5WY8109 Keyless Entry TX User Manual CLAx

Continental Automotive Systems US Inc. Keyless Entry TX CLAx

Users Manual

Re: Certification for Siemens/Continental Transmitter
Model/PN(s): 25836190, 25836188
FCC ID: M3N5WY8109
IC: 267F-5WY8109
The device under test is manufactured by the grantee (Siemens/Continental) and sold as
an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee
must ensure the end-user has all applicable / appropriate operating instructions. When
end-user instructions are required, as in the case of this product, the grantee must notify
the OEM to notify the end-user.
Siemens/Continental will supply the following information to the reseller/distributor
dictating what must be included in the end user’s manual for the commercial product.
INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL
The following information must be included in the end product user’s manual to
ensure continued FCC and Industry Canada regulatory compliance. The ID
numbers must be included in the manual if the device label is not readily accessible
to the end user. The compliance paragraphs below must be included in the user's
manual.
************************************************************************
FCC ID:M3N5WY8109 IC: 267F-5WY8109
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry
Canada. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
WARNING: Changes or modifications not expressively approved by the party
responsible for compliance could void the user's authority to operate the equipment.
The term “IC:” before the radio certification number only signifies that Industry Canada
technical specifications were met.
************************************************************************

Navigation menu