Continental Automotive Systems A2C766336 BCM LF Transmitter User Manual Exh 08 Users Manual 003

Users Manual

The device under test is manufactured by the grantee (Continental Automotive Systems US Inc.);

and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, etc…, the grantee must

ensure the end-user has all applicable / appropriate operating instructions. When end-user

instructions are required, as in the case of this product, the grantee must notify the OEM to notify the

end-user.

Continental Automotive Systems US Inc. will supply this document to the reseller/distributor

dictating what must be included in the end user’s manual for the commercial product.

INFORMATION TO BE INCLUDED IN THE END USER’S MANUAL

The following information (in blue) must be included in the end product user’s manual to

ensure continued FCC regulatory compliance. The ID numbers must be included in the

manual if the device label is not readily accessible to the end user. The compliance

paragraphs below must be included in the user's manual.

******************************************************************************

Type / FCC ID: M3NA2C766336 IC: 7812A-A2C766336

This device complies with Part 15 of the FCC Rules and with Innovation, Science and Economic

Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR

d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

1. L’appareil ne doit pas produire de brouillage;

2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

Note: Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

******************************************************************************