Continental Automotive Systems A2C931426 RKES Transmitter User Manual

Continental Automotive Systems US Inc. RKES Transmitter

User Manual

The device under test is manufactured by the grantee (Continental Corporation) and sold as anOEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensurethe end-user has all applicable / appropriate operating instructions. When end-user instructionsare required, as in the case of this product, the grantee must notify the OEM to notify the end-user.Continental Corporation will supply this document to the reseller/distributor dictating whatmust be included in the end user’s manual for the commercial product.INFORMATION TO BE INCLUDED IN THE END USER'S MANUALThe following information (in blue) must be included in the end product user’s manual toensure continued FCC and Industry Canada regulatory compliance. The ID numbers mustbe included in the manual if the device label is not readily accessible to the end user. Thecompliance paragraphs below must be included in the user's manual.******************************************************************************FCC ID: M3N-A2C931426, IC: 7812A- A2C931426This device complies with Part 15 of the FCC Rules and with Industry Canadalicense-exempt RSS standard(s). Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) This devicemust accept any interference received, including interference that may causeundesired operation.Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditionssuivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur del'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage estsusceptible d'en compromettre le fonctionnement.Note: Changes or modifications not expressively approved by the party responsiblefor compliance could void the user's authority to operate the equipment. The term“IC:” before the radio certification number only signifies that Industry Canadatechnical specifications were met.******************************************************************************

Navigation menu