Continental Automotive Systems KORX433 Remote Keyless Entry System (Receiver) User Manual Function Kor Rx 5WY8231

Download:
Mirror Download [FCC.gov]
Document ID	1884052
Application ID	VQSCSLb4864hRAiEjsdJew==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.04kB (162953 bits)
Date Submitted	2013-01-22 00:00:00
Date Available	2013-01-22 00:00:00
Creation Date	2013-01-16 16:27:23
Producing Software	Acrobat Distiller 10.1.2 (Windows)
Document Lastmod	2013-01-16 16:27:23
Document Title	Microsoft Word - Function_Kor_Rx_5WY8231
Document Creator	PScript5.dll Version 5.2.2
Document Author:	B1C7B1E2C0FC

Continental Automotive
I BS PG3 WL
User Manual / Functional
Description
of
RF Receiver module
Type: SVI-KORX433(433.92MHz)
Page 1 of 6
Continental Automotive
I BS PG3 WL
1. General information
This Korean RF Receiver is used for RKE functions on vehicles.
The receiver principle is super heterodyne PLL frequency synthesizer and designed
for the reception of 1KHz Manchester codes with only FSK signal optimized.
The Center frequency are 433.92MHz(5WY8231, NA).
This receiver has oriented enhanced RF LNA characteristic to improve RF sensitivity
instead of internal LNA part of InfineonTDA 522x provided.(removed internal LNA)
The receiver module is best optimized SAW filter, External LNA and 1K data baud
filtering for data band spectrum noise characteristic.
This receiver has 9 leg’s(1.Antenna input, 2.GND- antenna, 3.LNA- power supply,
4.Vcc-power supply, 5.PWDN, 6.RSSI, 7.DATA-output, 8.GND, 9.MSL)
which will be united to SRX PCB by wave soldering.( stick into main PCB by hand).
1.Operating temperature range
-40 ºC < T < +85 ºC
2. Technical Data
All data is specified at T= 25 °C (RT) and VCC = 5V
3. VCO – Frequency
Frequency
Variants
433.92MHz,
Tolerance
T=-40 ºC to +85 ºC
± 90ppm
VCO frequency
846.44MHz
4. Input Sensitivity
Input sensitivity at center frequency, BER 10 -2 (Vcc=5V)
 FSK:
fmod = 1 kHz square- wave +/-35KHz deviation.
Variants
5WY 8231
Description
433.92MHz,
FSK,1K
Condition
Typ
min
unit
FSK ,Fmod=1KHz
-110
≤ -107
dBm
Page 2 of 6
Continental Automotive
I BS PG3 WL
4.1 Sensitivity Variation over temperature
Sensitivity Variation T=-40 to 85°C:
normal sense @ RM ≤ ±3dB
4.2 FSK frequency-deviation
F= ±120 kHz
Max .FSK deviation
Min. FSK deviation
F = ± 10 kHz
1k variants
For the min. sensitivity, under the degraded Freq-deviation less than 30 KHz, could be allowed within 3dB.
5. Current Consumption; Vcc = 5 V (RT)
(no RF – signal applied to the receiver input)
5.1 Current consumption
 Vcc = 5 V,
 No RF signal applied at RF input
5.2 Active current (Switching High) with LNA
@ T=25ºC (RT):
FSK
Is < 9.1 mA
FSK
Is < 9.3 mA
@T=-40 to +85°C
5.3 Standby current (switching Low) with LNA
@ T=-40 to +85°C
Is < 5 µA
The power supply is not ESD protected.
This protection must be done on the main board (ECU).
Page 3 of 6
Continental Automotive
I BS PG3 WL
6. Schematic Block diagram
7. Physical Layout information
7.1 I/O pins layout


KOR-baby-Rx I/O pin configuration
1- Antenna input
2- GND- antenna
3- LNA- power supply
4- Vcc-power supply
5- PWDN
6- RSSI
7- DATA-output
8- GND
9- MSEL
Page 4 of 6
Continental Automotive
I BS PG3 WL
8. Homologation labelling
8.1 Model name : SVI-KORX433
8.2 USA(433.92MHz) : SY5KORX433
8.3 CANADA(433.92MHz) : 8325A-KORX433
8.4 Homologation statement
FCC Compliance Statement.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interferencethat may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Do Not
Any changes or modifications to the equipment not expressly
approved by the party responsible for compliance could void
user’s authority to operate the equipment.
Page 5 of 6
Continental Automotive
I BS PG3 WL
IC Compliance Statement.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisee aux deux conditions
suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi,
meme si le brouillage est susceptible d’en compromettre le fonctionnement.
Page 6 of 6

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 
Create Date                     : 2013:01:16 16:27:23+09:00
Modify Date                     : 2013:01:16 16:27:23+09:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : 
Title                           : Microsoft Word - Function_Kor_Rx_5WY8231
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 10.1.2 (Windows)
Document ID                     : uuid:032d1b6e-b0dc-4038-bdbd-c56c82a1380c
Instance ID                     : uuid:8ed898be-e616-4325-a20d-735f87f8bfcf
Page Count                      : 6

EXIF Metadata provided by EXIF.tools