Continental Automotive Systems SMK Smart Key ECU User Manual

Continental Automotive Systems Corporation Smart Key ECU Users Manual

Users Manual

Download: Continental Automotive Systems SMK Smart Key ECU User Manual
Mirror Download [FCC.gov]Continental Automotive Systems SMK Smart Key ECU User Manual
Document ID726427
Application IDopPAGL7BtMFOrvtoUOzN7Q==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize8.74kB (109268 bits)
Date Submitted2006-11-09 00:00:00
Date Available2006-11-09 00:00:00
Creation Date2006-11-09 20:52:18
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2006-11-09 20:52:18
Document TitleMicrosoft Word - User Manual for SMK ECU_revised.doc
Document CreatorPScript5.dll Version 5.2
Document Author: james_kwon

Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit
nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung
Proprietary data, company confidential.
All rights reserved.
Confié à titre de secret d'entreprise. Tous droits réservés.
Comunicado como segredo empresarial. Reservados todos os direitos.
Confidado como secreto industrial. Nos reservamos todos los derechos.
Document :
User Manual for Smart Key ECU
Project :
Smart Key ECU
Project Code :
Version:
0.1
Date:
Aug. 10 '06
Engineering change order-No.:
Design Freeze No.:
Number of pages:
Filename:
User Manual for SMK ECU_revised
SV SASCO
Identification No. :
.
Proprietary data, company confidential.
All rights reserved.
Confié à titre de secret d'entreprise. Tous droits réservés.
Comunicado como segredo empresarial. Reservados todos os direitos.
Confidado como secreto industrial. Nos reservamos todos los derechos.
Operation Guide
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit
nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung
Caution !
Any changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void user’s authority to operate the equipment.
Editor :
KK Ko
Version:
0.5
Document name
Project code
ECO / DF No.
Aug. 10. 2006
File: User Manual for SMK ECU_revised
Identification No. : Document No.
Page 2 / 5
.
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit
nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung
Proprietary data, company confidential.
All rights reserved.
Confié à titre de secret d'entreprise. Tous droits réservés.
Comunicado como segredo empresarial. Reservados todos os direitos.
Confidado como secreto industrial. Nos reservamos todos los derechos.
Contents list
1.
1.1
1.2
1.2.1
1.2.2
1.2.3
1.2.4
Editor :
KK Ko
Version:
0.5
Page
System configulation
scope of SMART KEY SYSTEM
short description of the SYSTEM
General Definition of SMART KEY
Wireless Communication
concept Description
System Architecture
Aug. 10. 2006
File: User Manual for SMK ECU_revised
Document name
Project code
ECO / DF No.
Identification No. : Document No.
Page 3 / 5
.
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit
nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung
Proprietary data, company confidential.
All rights reserved.
Confié à titre de secret d'entreprise. Tous droits réservés.
Comunicado como segredo empresarial. Reservados todos os direitos.
Confidado como secreto industrial. Nos reservamos todos los derechos.
1. System configulation
1.1
scope of SMART KEY SYSTEM
The System offers the following features:
•
passive access for two doors, driver side and passenger side as well as trunk/tailgate
•
passive start after interior detection of the SMART KEY FOB (without interior trunk and
hat shelf detection)
•
LF-RF communication (based on Siemens’ SMART KEY system)
•
passive access/locking of the two front doors via a toggle push button in the door
handles
•
passive access trunk/tailgate via the trunk lid switch at the trunk
•
max. 2 SMART KEY FOBs can be handled by the system
•
immobilizer backup antenna driver integrated into MSL
•
communication to the engine management system via a single line interface
•
communication to the MSL via a single line interface
•
block of the steering column by the MSL device
1.2
short description of the SYSTEM
1.2.1
General Definition of SMART KEY
The SMART KEY system is a system that allows the user to access and operate a
vehicle in a very convenient way. To access the vehicle no traditional key or remote
control unit is needed.
The user carries a SMART KEY FOB which itself does not require any conscious
actions by the user (e.g. operate a button). The SMART KEY system is triggered by
pressing a push button in the door handle.
After being triggered the vehicle sends out a request in a limited range. If the
SMART KEY FOB receives this request, it automatically sends a response to the
vehicle. Then the system decides whether to perform a particular action (unlocking,
locking…) or remain inactive.
In a similar manner the vehicle’s Mechatronic Steering Lock (MSL) is released.
Again, a communication between the vehicle and the SMART KEY FOB is needed
before any actions will be performed.
1.2.2
Wireless Communication
Electromagnetic waves are used to exchange information between the vehicle and the
SMART KEY FOB. Both, vehicle and SMART KEY FOB are equipped with a transmitter,
a receiver and several antennas.
Editor :
KK Ko
Version:
0.5
Document name
Project code
ECO / DF No.
Aug. 10. 2006
File: User Manual for SMK ECU_revised
Identification No. : Document No.
Page 4 / 5
.
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit
nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung
Proprietary data, company confidential.
All rights reserved.
Confié à titre de secret d'entreprise. Tous droits réservés.
Comunicado como segredo empresarial. Reservados todos os direitos.
Confidado como secreto industrial. Nos reservamos todos los derechos.
1.2.3
concept Description
With this concept it is possible to have a set of interior antennas that covers the vehicle’s
interior and a set of exterior antennas that covers the vehicle’s exterior.
For an unambiguous separation between the vehicle’s interior and exterior it is sufficient
that at least one area is covered exactly by the corresponding operating ranges of the
antennas.
The functions of the SMART KEY system have to be provided in a clearly defined and
limited range. For the up-link from the vehicle to the SMART KEY FOB, a magnetic field
with a frequency of 125 kHz and ASK modulation is used. Inductive antennas in and at
the vehicle radiate the electromagnetic energy.
Technical aspects of 125 kHz – magnetic field:
• virtually no reflections,
•
cubical decrease of field strength → allows good range control,
•
released frequency band (ISM),
•
high penetration,
•
low quiescent current demand due to 125 kHz input stage (SMART KEY FOB),
•
less sensitive for detuning compared to higher frequency.
For the down-link from the SMART KEY FOB to the vehicle, the standard radio frequency
(RF) is used (similar to the classic remote control functions) with FSK modulation.
1.2.4
System Architecture
The system is designed as an optional system, making it possible to equip vehicles of the
same car-Line with different levels of access control systems.
The system is suitable to be integrated into an existing architecture that provides central
locking functions with standard remote control. This proposal assumes that the following
functions / devices are already present in the vehicle’s architecture.
•
Central locking system (latch / motor – drivers etc.)
•
Standard body control functions
•
Warning buzzer
Editor :
KK Ko
Version:
0.5
Document name
Project code
ECO / DF No.
Aug. 10. 2006
File: User Manual for SMK ECU_revised
Identification No. : Document No.
Page 5 / 5

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2006:11:09 20:52:18+09:00
Create Date                     : 2006:11:09 20:52:18+09:00
Format                          : application/pdf
Title                           : Microsoft Word - User Manual for SMK ECU_revised.doc
Creator                         : james_kwon
Document ID                     : uuid:6e1bdba4-1879-459d-a7a5-c8a49c7e2d10
Instance ID                     : uuid:686786e0-a36e-46c5-8eaf-c99dff648fe4
Page Count                      : 5
Author                          : james_kwon
EXIF Metadata provided by EXIF.tools
FCC ID Filing: SY5SMK

Navigation menu