Continental Automotive Systems SMK30 Smart Key ECU User Manual

Continental Automotive Systems Corporation Smart Key ECU

UserManual.wiki >

Continental Automotive Systems >

SMK30 User Manual HTML Version

User Manual

Comunicado como segredo empresarial. Reservados todos os direitos.

Confidado como secreto industrial. Nos reservamos todos los derechos.

Weitergabe sowie Vervielfältigung dieser Unterlage, Ver

wertung und Mitteilung ihres Inhalts nicht gestattet, soweit

nicht ausdrücklich zugestanden. Zuwiderhandlungen ver

sondere für den Fall der Patenterteilung oder GM-Eintragung

Identification No. :

Document : User Manual for Smart Key ECU

Model : SMK 3.0

Project Code :

Version: 0.1

Date: Feb. 26 '13

Engineering change order-No.:

Design Freeze No.:

Number of pages: 7

Filename: User Manual for SMK 3.0.doc

Editor : KK Ko Document name Project code

Version: 0.5 Aug. 10. 2006

ECO / DF No.

Identification No. : Document No.

File: User Manual for SMK3.0_편집_매뉴얼용 Page 2 / 7

Comunicado como segredo empresarial. Reservados todos os direitos.

Confidado como secreto industrial. Nos reservamos todos los derechos.

Weitergabe sowie Vervielfältigung dieser Unterlage, Ver

wertung und Mitteilung ihres Inhalts nicht gestattet, soweit

nicht ausdrücklich zugestanden. Zuwiderhandlungen ver

sondere für den Fall der Patenterteilung oder GM-Eintragung

Contents list Page

1. System configulation 3

1.1 scope of SMART KEY SYSTEM 3

1.2 short description of the SYSTEM 3

1.2.1 General Definition of SMART KEY 3

1.2.2 Wireless Communication 3

1.2.3 concept Description 3

1.2.4 System Architecture 4

1.2.5 Main Functions 5

1.3 System Overview 6

2. Homologation

Editor : KK Ko Document name Project code

Version: 0.5 Aug. 10. 2006

ECO / DF No.

Identification No. : Document No.

File: User Manual for SMK3.0_편집_매뉴얼용 Page 3 / 7

Comunicado como segredo empresarial. Reservados todos os direitos.

Confidado como secreto industrial. Nos reservamos todos los derechos.

Weitergabe sowie Vervielfältigung dieser Unterlage, Ver

wertung und Mitteilung ihres Inhalts nicht gestattet, soweit

nicht ausdrücklich zugestanden. Zuwiderhandlungen ver

sondere für den Fall der Patenterteilung oder GM-Eintragung

1. System configulation

1.1 scope of SMART KEY SYSTEM

The System offers following features:

 passive access to two doors and trunk; driver side, passenger side, and trunk/tailgate

 passive start after interior detection of the SMART KEY FOB.

 LF-RF communication (based on Continental’s SMART KEY system)

 passive access/locking of the two front doors via a toggle push button in the door

handles

 passive access trunk/tailgate via the trunk lid switch at the trunk

 immobilizer backup solution integrated into SMK 3.0

 communication to the engine management system via a single line interface

 communication to the ESCL via a single line interface

 block of the steering column by the ESCL device

1.2 short description of the SYSTEM

1.2.1 General Definition of SMART KEY

The SMART KEY system is a system that allows the user to access and operate a

vehicle in a very convenient way.

The SMART KEY system is triggered by pressing a push button in the door handle

or by pressing a start-stop button in the dash board.

After triggered, the vehicle sends out a LF telegram to all antenna output. And then

Smartkey FOB measures the power of each antenna, and sends this information to

SMARTKEY UNIT(SMK 3.0). From this information, Smart Key unit determines the

location of SMART KEY FOB and decides whether to perform a particular action

(unlocking, locking…) or to remain inactive.

1.2.2 Wireless Communication

Electromagnetic waves are used to exchange information between the vehicle and the

SMART KEY FOB. Both, vehicle and SMART KEY FOB are equipped with a transmitter,

a receiver and several antennas.

1.2.3 concept Description

With this concept it is possible to have a set of interior antennas that cover the vehicle’s

interior and a set of exterior antennas that cover the vehicle’s exterior.

For an unambiguous separation between the vehicle’s interior and exterior it is sufficient

that at least one area is covered exactly by the corresponding operating ranges of the

antennas.

Editor : KK Ko Document name Project code

Version: 0.5 Aug. 10. 2006

ECO / DF No.

Identification No. : Document No.

File: User Manual for SMK3.0_편집_매뉴얼용 Page 4 / 7

Comunicado como segredo empresarial. Reservados todos os direitos.

Confidado como secreto industrial. Nos reservamos todos los derechos.

Weitergabe sowie Vervielfältigung dieser Unterlage, Ver

wertung und Mitteilung ihres Inhalts nicht gestattet, soweit

nicht ausdrücklich zugestanden. Zuwiderhandlungen ver

sondere für den Fall der Patenterteilung oder GM-Eintragung

The functions of the SMART KEY system have to be provided in a clearly defined and

limited range. For the up-link from the vehicle to the SMART KEY FOB, a magnetic field

with a frequency of 125 kHz and ASK modulation is used.

Technical aspects of 125 kHz – magnetic field:

 virtually no reflections,

 cubical decrease of field strength  allows good range control,

 released frequency band (ISM),

 high penetration,

 low quiescent current demand due to 125 kHz input stage (SMART KEY FOB),

 less sensitive for detuning compared to higher frequency.

For the down-link from the SMART KEY FOB to the vehicle, the standard radio frequency

(RF) is used (similar to the classic remote control functions) with FSK modulation.

1.2.4 System Architecture

The system is designed as an optional system, making it possible to equip vehicles of the

same car-Line with different levels of access control systems.

The system is suitable to be integrated into an existing architecture that provides central

locking functions with standard remote control. This proposal assumes that the following

functions / devices are already present in the vehicle’s architecture.

 Central locking system (latch / motor – drivers etc.)

 Standard body control functions

 Warning buzzer

Editor : KK Ko Document name Project code

Version: 0.5 Aug. 10. 2006

ECO / DF No.

Identification No. : Document No.

File: User Manual for SMK3.0_편집_매뉴얼용 Page 5 / 7

Comunicado como segredo empresarial. Reservados todos os direitos.

Confidado como secreto industrial. Nos reservamos todos los derechos.

Weitergabe sowie Vervielfältigung dieser Unterlage, Ver

wertung und Mitteilung ihres Inhalts nicht gestattet, soweit

nicht ausdrücklich zugestanden. Zuwiderhandlungen ver

sondere für den Fall der Patenterteilung oder GM-Eintragung

1.2.5 Main Functions

 The system allows the user to access and exit (unlock and lock) the vehicle without

performing any actions with the SMART KEY FOB.

 The system allows the user to control ESCL lock/unlock, to operate relaies to provide

power(Off, Accessory, Ignition) to other ECU, and to start/stop the vehicle’s engine

without performing any actions with the SMART KEY FOB.

 Additionally, the system offers the user can operate all vehicle functions by contacting

the Fob to the Start/stop button, which have Immobilizer antenna(terminal control

fuction), and by inserting the mechanical key blade into the door handle(Passive

access function).

Figure 1: Offered System Components

FOB Key

LF Antenna

SMK 3.0

Start Stop Button

(Immobilizer Antenna included)

ESCL

DH : 안테나 코일 housing

Editor : KK Ko Document name Project code

Version: 0.5 Aug. 10. 2006

ECO / DF No.

Identification No. : Document No.

File: User Manual for SMK3.0_편집_매뉴얼용 Page 6 / 7

Comunicado como segredo empresarial. Reservados todos os direitos.

Confidado como secreto industrial. Nos reservamos todos los derechos.

Weitergabe sowie Vervielfältigung dieser Unterlage, Ver

wertung und Mitteilung ihres Inhalts nicht gestattet, soweit

nicht ausdrücklich zugestanden. Zuwiderhandlungen ver

sondere für den Fall der Patenterteilung oder GM-Eintragung

1.3 System Overview / Block Diagram

Figure 2: Principle of Communication

Editor : KK Ko Document name Project code

Version: 0.5 Aug. 10. 2006

ECO / DF No.

Identification No. : Document No.

File: User Manual for SMK3.0_편집_매뉴얼용 Page 7 / 7

Comunicado como segredo empresarial. Reservados todos os direitos.

Confidado como secreto industrial. Nos reservamos todos los derechos.

Weitergabe sowie Vervielfältigung dieser Unterlage, Ver

wertung und Mitteilung ihres Inhalts nicht gestattet, soweit

nicht ausdrücklich zugestanden. Zuwiderhandlungen ver

sondere für den Fall der Patenterteilung oder GM-Eintragung

2. Homologation

FCC Compliance Statement.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions :

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interferencethat may cause undesired operation.

Do Not

Any changes or modifications to the equipment not expressly

approved by the party responsible for compliance could void

user’s authority to operate the equipment.

IC Compliance Statement.



Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisee aux deux conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage, et

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi, meme si le

brouillage est susceptible d’en compromettre le fonctionnement.

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may

cause undesired operation of the device.

Continental Automotive Systems SMK30 Smart Key ECU User Manual

Continental Automotive Systems Corporation Smart Key ECU

User Manual

Navigation menu

Namespaces

Views

Navigation