Continental Automotive 315-140930 inductive transmitter User Manual Functional description
Continental Automotive GmbH inductive transmitter Functional description
Contents
- 1. User Manual Statements
- 2. Users Manual
Users Manual
IC: 7812D-5WK50138
FCC ID:KR5315140930
I:\POSTZULA\z1_Projekte\B_Abgeschlossen\_Abgeschlossene_Projekte_(2010_201x)\Porsche\Varianten\BCM\201
4_07_Redesign\Owner_Manual_Porsche_BCM.docx
Page 1 of 2
LABEL DESIGN CANADA, USA
Continental
Model: PAG-BCM-Front-315-140930
IC: 7812D-5WK50138
FCC ID:KR5315140930
Owner Manual Canada:
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
IC: 7812D-5WK50138
FCC ID:KR5315140930
I:\POSTZULA\z1_Projekte\B_Abgeschlossen\_Abgeschlossene_Projekte_(2010_201x)\Porsche\Varianten\BCM\201
4_07_Redesign\Owner_Manual_Porsche_BCM.docx
Page 2 of 2
Owner Manual USA:
The device under test is manufactured by the grantee Continental and sold as an
OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee
must ensure the end-user has all applicable / appropriate operating instructions.
When end-user instructions are required, as is the case with this product, the grantee
must notify the OEM to notify the end-user.
Continental will supply the following information to the reseller/distributor dictating
what must be included in the end user’s manual for the commercial product.
INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL
The following information (in blue) must be included in the end product user’s manual
to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers
must be included in the manual if the device label is not readily accessible to the end
user. The compliance paragraphs (in blue) below must be included in the user's
manual.
************************************************************************
FCC ID: KR5315140930
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.