Continental Automotive 5WK45144 Keyless Car Entry User Manual

Download:
Mirror Download [FCC.gov]
Document ID	778796
Application ID	xdbaXttbhAa5mKIVtt31BQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	185.63kB (2320355 bits)
Date Submitted	2007-04-11 00:00:00
Date Available	2007-04-11 00:00:00
Creation Date	2007-04-05 13:21:45
Producing Software	KONICA MINOLTA bizhub C450
Document Lastmod	2007-04-05 14:38:39
Document Title	User Manual
Document Creator	KMBT_C450

Siemens AG SV I iC PE RF Design
Siemens VDO Automotive
10: 267T- 5WK45144 FCC ID: KR5 5WK45144
User Manual
of the
Siemens VDO Transmitter
TYPE
451 TX
5WK45144 (USA)
5WK45146 (ECE)
5WK45145 (Japan)
5WK45147 (Australia)
iwosmmwakwasvsmmmsLxey)rammsmgnumjnarmjmammrxnec Pane ( oi 5
Siemens AG SVI lC PE RF Design
Siemens VDO Automotive
IC:267T-5WK45144 FCC ID: KR55WK45144
1. General Description of the RF Transmitter
The described system is a radio -frequency remote control (usually c alled Remote Keyless Entry
system) for central doors locking / unlocking destined to equip the Smart W451 car Iine.The
system components constituting the Smart W451 application are:
- The RF key with 3 or 4 buttons (doors locking / unlocking, trunk unlockin 9), including the
transponder function
- The SAM which integrates the RF receiver, and in which the remote control decoding is
done
. The immobiliser with an LF coil antenna.
The transmitter is used to transmit information tor locking or unlocking the vehic Is by a
unidirectional RF transmission line for normal remote operation by pressing a button Also is
implemented the function of the Immobilizer in the transmitter With a bidirectional LF —
transmission (passive).
In general the following lunctions are p rovtded.
Lock the car
Unlock the car
Unlock the boot |Id of the car
Panic alarm
Immobilizer (motorstart)
2. Key Constitutive parts
The RF key is constituted With.
Bottom sheli with the integrated holder for the mechanical key blade
Mechanical key blade
Top sheII
Sealing and switch pad
Button support
PCB with minus pole SMD battery contact
Plus pole battery contact
3V Lithium oell battery CR2016, 90mAh
IWest?ULASmanfiwfitISmalLWdfi17KeylTemhlsdteiDukuiflectFunc_SmarM/¢5|YXdoc Page 2 m 5
Slemens AG SV l IC PE RF Design
Siemens VDO Automotive
IC: 267T- 5WK45144 FCC ID: KR55WK45144
3. Power Supply
The transmitter is provided with 1 lithium battery (CR 2016) that gives a
power supply of +3V. The key is protected against polarity reversal due to wrong battery insertion
by mechanical means. The battery capacity covers the typical usage pattern of 10000 activation
during two years
4. Button functions
User Action Performed Function a t Vehicle
short LOCK button press central locking
LOCK button press for more than 500ms LOCK comfort tunction starts
(about)
shod UNLOCK button press central unlocking
UNLOCK button press for more than 500ms UNLOCK comfort function starts
(about)
TRUNK button press unlock trunk
PANIC button press (USA variant only) panic function
5. Block Diagram of the Transmitter
Battery
Power supply managment PLL RF
u:
8 bit RISC unit Clock E Stage
EEPROM E-ROM/ROM 5 Crystal
LF coil Transponder Interface ‘
3 or 4 swuches
PCF 7941: Stacmxl
lWDSYZULAEVMVLME“$7051st1_Ksy\Tscflnlsd'teiDokuidoflFungszan51Txa“ Page Jul 5
Siemens AG SVI IC PE RF Design
Siemens VDO Automotive
IC: 267T— 5WK45144 FCC ID: KRS 5WK45144
6. Mechanical Design
Top view of 4 buttons version Top view of 3 buttons version
Key Blade
(VALEO)
Bottom view (3 & 4 buttons version) Side view (3 & 4 buttons version)
7. Technical Data
Carrier frequency, 433 MHz t Sippm (ECE).
315 MHz i 73 ppm (USA, Japan Australia)
Output power ECE' < 1DmW
Output power USA. Japa n,
Australia: Country limits
Type of modulation: FSK
Method of frequency generation: PLL
Number of channels' 1
Power supply: battery (CR 2016)
Type of battery: lithium
imomunwary/V‘siemaurasiJewremmmspuxuucirunesMEm/wwxm Page A m 5
Siemens AG
Siemens VDO Automotive
IC: 267T- 5WK45144
SV I IC PE RF Design
FCC lDi KR5 5Wl<45144
8. Label Design
Euroge:
Siemens VDO
451 TX
5WK45146
(6
USA Canada:
Siemens VDO
451 TX
5WK45144
FCC ID:KR5 5WK45144
lC: 267T-5WK45144
Entry Owners Manual, Canada, USA:
NOTE
This device complies with part 15 ofthe FCC Rules and RSS -210 Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
devroe must accept inlerlerence received, including interference that may cause undesired
operation,
CAUTION
Changes or modifications not expressly approved by the manufacturer could avoid the user's
authority to operate lhe equipment
Japan:
Siemens VDO
451 TX
5WK45145
Siemens VDO
451 TX
5WK45147
l\POS'l1ULAiSmaLWASiSmarLWfi‘l7KeyiTemmsmeibukuidD:lFun575mamN65"Xdoc
page 5 a 5

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Create Date                     : 2007:04:05 13:21:45+01:00
Creator Tool                    : KMBT_C450
Modify Date                     : 2007:04:05 14:38:39+02:00
Metadata Date                   : 2007:04:05 14:38:39+02:00
Producer                        : KONICA MINOLTA bizhub C450
Format                          : application/pdf
Document ID                     : uuid:596b31f5-29f2-4d35-a78a-c4d499597098
Instance ID                     : uuid:1b6a78bf-56c3-4646-9980-fd3cda04ec00
Page Count                      : 5
Creator                         : KMBT_C450

EXIF Metadata provided by EXIF.tools