Continental Automotive IK4CH-01 Radio Frequency Transmitter(Key Fob) User Manual Functiona lDescription Nissan CMFB keyfob
Continental Automotive GmbH Radio Frequency Transmitter(Key Fob) Functiona lDescription Nissan CMFB keyfob
IK4CH-01 User manual Revised 0719
Continental Automotive France SAS
Interior Division- Body & Security
-1- Apr. 11, 2017
Functional Description
User Manual
of the
Continental
Radio Frequency Transmitter
Model:
IK4CH-01 and IK4PL-01 (433.92 MHz)
IK3CH-01 (315 MHz)
(Key Fob)
Continental Automotive France SAS
Interior Division- Body & Security
-2- Apr. 11, 2017
Functional description of the IK4CH-01, IK4PL-01, IK3CH-01
key
1 General Product Information
This document gives an overview of the different device operation modes and the RF transmissions
performance of the key model IK4CH-01, IK4PL-01, IK3CH-01. In this document the device is
referenced as "key", even if the mechanical backup key might be separated from it.
1.1 Trade mark
Continental
1.2 Brand
Continental
Continental Automotive France SAS
Interior Division- Body & Security
-6- Apr. 11, 2017
4 Button functions
The validation of the accurate frequency deviation and the measurement of the transmission function
of the key are implemented based on RF test software. The graphic below shows the functionality of
the buttons.
First
Button
press
Second
Button
press
Third
Button
press
Fourth Button
press
Fifth button
press
CW Flow
CW Fup
Continuous
RF data
frame
CW Fup
Stop RF emission
Button
Lock
Continental Automotive France SAS
Interior Division- Body & Security
-7- Apr.11, 2017
5 Key fobs Variants
Product reference
Product variant
Drawing
IK4PL-01
A2C398083
marking : 04
EdG 433.92MHz
Lock/Unlock/Light/Trunk
433.92 MHz
IK4CH-01
A2C398080
marking : 02
HdG 433.92MHz
Lock/Unlock/Light/Trunk
433.92 MHz
Continental Automotive France SAS
Interior Division- Body & Security
-8- Apr., 11, 2017
IK3CH-01
A2C398081
marking : 01
HdG 315MHz
Lock/Unlock/Light/Trunk
315 MHz
IK4CH-01
A2C398084
marking : 06
HdG 433.92MHz
RES
Lock/Unlock/RES/Trunk
433.92 MHz
Continental Automotive France SAS
Interior Division- Body & Security
-9- Apr. 11, 2017
IK4PL-01
A2C398086
marking : 08
EdG 433.92MHz
RES
Lock/Unlock/RES/Trunk
433.92 MHz
FCC statement
15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
15.21
Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate
equipment.
This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF
exposure compliance.
15.105
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC statement
RSS‐GenIssue48.4
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may
not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.