Continental Automotive TIS-07 Pressure, Temperature and Acceleration Sensor User Manual Func Tire Guard 1C FSK 433 92MHz TIS 07

Continental Automotive GmbH Pressure, Temperature and Acceleration Sensor Func Tire Guard 1C FSK 433 92MHz TIS 07

User Manual

Continental Automotive GmbH           of the   Continental    Tire Pressure Generation 1C wheel unit   Type    TIS-07     (FSK 433.92MHz)    User Manual   Josef Lohr I BS PG3 CFRF WM    1 of 4
Continental Automotive GmbH    1. SYSTEM OVERVIEW The tire pressure monitoring system (referred as TG for Tire Guard) consists of the following units:  - Tire guard wheel unit type TIS-07 which includes an integrated pressure, temperature and acceleration sensor and a RF transmitter. - RF receiver unit which includes a RF receiver (not described in this document)   The TG monitors a vehicle's tire pressure whilst driving or stationary. An electronic unit (wheel unit) inside each tire, mounted to the valve stem, periodically measures the actual tire pressure. By means of RF communication, this pressure information is transmitted to the RF transmitter.    2. TECHNICAL DESCRIPTION Carrier frequency:       433,92 MHz  Number of channels:    1 Type of modulation:      Frequency Shift Keying (FSK) FSK deviation      ±20kHz (min) to ±40kHz (max) Baud rate:        19200 bps Rated Output Power:    < 10mW Antenna:        Internal (PCB) Voltage supply:                                  1 Lithium battery 3V (CR2050) Voltage supply range:    2.1 up to 3.2V Size:                                                   L (76,21mm) x W (51,8mm) x H (15,7mm) Weight:                                               31,6g  Temperature range:                           -40°C - 120°C              Josef Lohr I BS PG3 CFRF WM    2 of 4
Continental Automotive GmbH     Continental A2C97432500    FCC ID:KR5TIS-07  3. LABEL  Continental 3.1.  EU 3.2. USA 3.3.  CANADA Josef Lohr I BS PG3 CFRF WM    3 of 4   This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.   Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.  This device complies with the FCC safety requirements for RF exposure in accordance with FCC rule part §2.1093This device has complies with the safety requirement for RF exposure in accordance with RSS-102, issue 5 for portable conditions Model: TIS-07 IC:7812D-TIS07 Cet appareil est conforme aux normes de sécurité pour l'exposition RF conformément à RSS-102, numéro 5, dans les conditions portables.
Continental Automotive GmbH      3.4.  KOREA Josef Lohr I BS PG3 CFRF WM    4 of 4

Navigation menu