Continental Automotive TR7412UB CAR AUDIO User Manual manual

Continental Automotive GmbH CAR AUDIO manual

User manual

TR7412UB-OR OWNER'S MANUAL
1Safety InformationThank you for purchasing this product, please read the manual carefully before operating, and reserve it for future reference.PRECAUTIONS•   Only in a 12-volt DC negative-ground electrical system. •    Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.•   When replacing the fuse, be sure to use one with an identical amperage rating.     Using a fuse with a higher amperage rating may cause serious damage to the unit.•   Make sure that pins or other foreign objects do not get inside the unit, they may cause malfunctions, or create safety hazards such as electrical shock.•   If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.•   Keep the volume at a level at which you can hear outside warning sounds  (horns sirens, etc.).CAUTION•  DO NOT open covers and do not repair  by yourself. Ask the dealer or an experienced technician for help.BEFORE OPERATION•  Do not raise the volume level too much, as this will block outside sounds, making driving dangerous. •  Stop the car before performing any complicated operation.  GeneralPower supply:     12V DC (10.8V-16V)  Maximum power output:                         4X41W Suitable speaker impedance:                    4ohmFuse spec:          10AWeight:        0.7kgDimensions (WxDxH):      188x116.3x58.5mmNote: 1 According to models with different wiring harness to connect the definition of the specific content, please refer to the model label.2 Specifications and the design are subject to change without notice due to improvements in technology.Specifications ContentsFrequency TableSafety Information ..................... ..................1Specifications............................................... 1Panel Controls..............................................2Button Tips....................................................3Bluetooth   Functions.......................................4USB function Summarization.........................4Electrical connectons.................................5Troubleshooting............................................6
2Panel Controls(1).   - Microphone(2).   - Power on/off,        - Mute,          when on,hold it more than 2 seconds to           power off.       - Rotate the VOL knob to adjust volume.   (3).  - Source     Radio,    USB (when USB inserted),    AUX IN,        A2DP,        Hold it more than 2 seconds to select PTY         mode.(4).  - Band switch:     FM1 -> FM2 -> FM3 -> MW1 -> MW2-> LW      - Hold it  Automatically search station and        store the signal strongly station to 1-6           Preset.     (5).  - Press SEL and rotate VOL knob to          select EQ preset mode:           EQ OFF-POP-CLASSIC-ROCK-JAZZ       -  Press to enter,when selecting the PTY mode,       - Press SEL and rotate VOL knob to          ajust the time,when on the CLOCK          mode. (6).  - Display system clock       - Hold it to setting clock       - Radio mode:          display PTY info/system clock/         current channel ,       - MP3 mode:    Turn and turn about folder name/file name/          ID3 TAG/Clock .(7).  - Radio mode      - Auto search the station from high to low         - MP3 mode          Select the previous track(8).   - Radio mode          Auto search the station from low  to           high        - MP3 mode           Select the next track(9).   - USB slot(10). - MP3 folder ahead/Hang up(11). - MP3 folder back/Contact mode/          Dial/Call transfer(12). - MP3 random play(13). -  MP3 repeat play(14). - Program intro play(10 sec.)(15). - Play/pause(10-15).         -1-6 radio preset      Press to tune in a preset station.           Hold for more than 2 seconds to           store current station.
3TA RETURN:On the FM mode ,set the TA time space Info of  auto search with RDS.Setting for “LONG”, Auto search the TA time space for 180 sec,Setting for “SHORT”, auto search the TA time space for 45 sec.Region setting to select AMERICAN,EUROPE,ASIA,JAPAN.Press [SEL] button,and then press the  [/]button to choose EQ/BAS/TRE/BAL/FAD/LOUD function,rotate the konb to adjust .TuneRadio seek automatically Press the /button auto search the station from high to low or from low to high.   Radio tune by step Hold it more than 2 second ,switch to the manual mode,press the button step search the station from high to low or from low to high.   Manual Memory StoreAt FM1/FM2/FM3/MW1/MW2/LW mode, press and hold button 1-6 to store current station in memory. You can store 36 stations in total. (18 FM/ 18 AM)Button TipsMP3 PlaybackTrack skip Press the /button to go to the previous  or next track.Hold it to enter fast forward or reverse back mode.MP3 track fast searchPress the [5D-]/[6D+]button to select MP3 folder back/aheadSet ClockRadio mode:press[DISP]button, Turn and turn display PTY/Clock/current channel MP3 playback mode:press[DISP]button,Turn and turn about folder name/file name/ID3 TAG/Clock Then press [DISP]button more than 2 seconds, ‘Clock‘ displayed,press [SEL] button, rotate the[VOL]knob and press [ /]button to set,  press [SEL] to confirm.System settingOn the non time display menu:Hold it [DISP] and press [ /]button to enter the system setup menu,  .CLOCK TA TA RETURN AF  REG CT  DX/LO  ST/MONO  AUTO ANS AUTO CON F  12H/24H  MIC SEL REGION  SWRC (ON/OFF)   LOGIC(ON/OFF)  SCROLL(ON/OFF) Wait for 1s and rotate the knob to set the system.TA setting :Rotate [VOL] knob to set ON/OFF.RDS Press the [DISP] button to set AF/TA/REG ,rotate the[VOL]knob to open or close AF/TA function.Hold the [SRC]button to PTY function ,rotate the [VOL]knob,display NEWS and POP program type.When display NEWS ,rotate the konb to select opposite presetNEWS-AFFAIRS-INFO-SPORT-EDUCATE-DRAMA-CULTURE-SCIENCE-VARIED-POP M-ROCK M-EASY M-LIGHT M-CLASSICS M-OTHER M-WEATHER -FINANCE-CHILDREN-SOCIAL -RELIGION-PHONE IN-TRAVEL-LEISURE-JAZZ-COUNTRY-NATION M-OLDIES-FOLK M-DOCUMENT-TEST-ALARMLogic ON/Logic OFFLogic ON to limit the use of the set to one hour when the car ignition is switched off.Logic OFFto prevent the set from turning on,when the car ignition is switched off.
4Loading/Take out USB equipment1.  Insert a USB device into the connector    and the unit will begin to play  automatically.2.  To stop playback of USB device, push    the SRC button to non USB mode and         then remove the USB device.USB Function SummarizationUSB functions (flash memory type) 1.  USB flash memory 2 in 1 support 2.   FAT 12/FAT 16/FAT 32 format supported.3.   USB 1.1 support, USB 2.0 support (For 2.0,      speed performance is as USB 1.1)4.  WMA files supported5.  Maximum number of MP3 files FAT 32        format supported  is 65535 files. (Maximum       number of MP3 files NTFS supported         is 1000 files. )       Maximum number of folders is 999. 6.   Maximum USB capacity support is cap at 8    GB and best performance with songs not   more than 500, and not exceeding 30        folders.7.  Not all USB devices are compatible with the unit.Bluetooth Functions Pairing 1.Open the smartphone's BT function, 2.The smartphone searches the bluetooth equipment.3.Enter the pairing code(1234) to pair. Press [6D-] button more than 2 sec,the moblie phone and the unit disconnect .BT mode selectingPress [SRC] button to choose BT mode.Press [DISP] button to display the A2DP information.Dialing1.Phone dialingMobile phone dialing ,LCD screen displays dialing information.2.Unit dialingPress [SRC] button swicth to A2DP(BT) mode,press [5 D+] to choose the DIAL ON function,press [SEL] button / [ /] button and rotate the knob to input dialing numbers,press [5 D+] button to dial.Voice switchIn the process of the phone,touch the icon to swith call voice in mobile phones.or press the [5D+] button to switch to DIAL ON/PLS PAIR/BT MUSIC.HANG UP/ONPress [5D+] button to answer a call,Press [6D-] button to hang up.A2DP modeOn A2DP music playing mode,press [1] button to choose pause/play mode.
5FCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:   Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.   Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your bodyFCC
6Electrical ConnectionsISO
7TROUBLESHOOTINGProblem Possible cause SolutionGeneralThe unit will not switch on.Car ignition is not on.Cable is not properly connected.Fuse is burnt.Turn your car key in the ignition.Check cable connection.Replace fuse with a new fuse of the same capacity.No sound Volume is set at minimum or the mutefunction is on.Check the volume or switch the mute function off.The unit or screen does not work normally. The unit system is unstable. Press the RESET button.Mode TUNERUnable to receive stations.The antenna is not connected properly. Connect the antenna properly.Poor quality reception of radio station.The antenna is not fully extended or it isbroken.Fully extend the antenna and if broken, replace it with anew one.Preset stations are lost.The battery cable is not properly connected. Connect the permanent live on the unit to the permanentlive on the vehicle.Mode USBUnable to insert USB device The USB device has beeninserted the wrong way round.Insert it the other way around.The USB device  cannot be read.NTFS format is not supported. Check that the file system is in FAT or FAT32 format. Dueto different formats, some models of storage devices orMP3 players may not be read.The following checklist can help you solve some problems which you may encounter when using the unit. Before consulting it, check the connectionsand follow the instructions in the user manual. Do not use the unit in abnormal condition, for example without sound, or with smoke or foul smell cancause fire or electric shock, immediately stop using it and call the store where you purchased it.
P/N:127075006196

Navigation menu