Continental Conair FF905TE 900MHz Cordless Telephone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	109506
Application ID	Q5xVNhjmqRyS9dk3emrzVQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.48kB (331030 bits)
Date Submitted	2000-07-17 00:00:00
Date Available	2000-09-01 00:00:00
Creation Date	2000-07-12 17:40:01
Producing Software	Acrobat 4.0 Scan Plug-in for Windows
Document Lastmod	2000-07-12 17:43:39
Document Title	User Manual
Document Creator	Acrobat 4.0 Scan Plug-in for Windows

moo‘euoqdmopesuqms‘wwfidm
(1.83) Wd Dem — wv 05:9 mums
use) we 00:3 — wv can; flaws-Aspunw
1860-999'008' I—
:Burl dial-l files newu
Qauoqd wopsuj neg mmmanos
eq) llw “uonenewug JO wed Buissgw
‘uunexedu fiuipJEfieJ suousenb JnaA o) siemsue elelpawwi mu
meiqwd en: qfinmm noti bile; suadxa Ana sengLsn
Jeqwnu aucudaiai “diam saws: aux JOl—XOO'I
‘emls an; D) mm] mm ext?) mop —d0_|,s
@ User's Manual for Cordless Telephone
FF905SH/FF9068HIFF907SH/FF9088H
Southwestem §eII
Freedom Phone”
Fold open this manual for information about this
telephone‘s installation and operation.
Please read the Important Safety Instructions
included in your package,
SOUTHWESTERN aeu. FREEDOM PHONE'E’
7475 North Glen Harbor Boulevard, Glendale AZ 85307
FFQOESH/FFBOGSH/FFEWSHJFFQGSSHIB—3383
9.4.th e. chm,
Bi
IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING YOUR
TELEPHONE EQUIPMENT,
BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE
FOLLOWED TO REDUCE THE
RISK OF FIRE, ELECTRIC
SHOCK AND INJURY TO
PERSONS, INCLUDING THE
FOLLOWING:
1, Read and understand all instructions.
2. Follow all warnings and instructions
marked on the product.
3. Unplug this product from the wall
telephone jack and power outlet
before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use
damp cloth for cleaning.
4. Do not use this product near water;
for example. near bathtub, wash
bowl. kitchen sink, laundry tub,
swimming pool, or in a wet basement.
5. Do not place this product on an
unstable cart, stand or table. The
product may fall. causing serious
damage to the product.
6. Slots or openings in the cabinet and
the pack and bottom are crowded for
ventilation, to protect it from
overheating. These openings must. not
be blocked or covered. The openings
should never be blocked by placing the
product on the bed. or other similar
suriaoe. This product should never be
SAFETY INSTRUCTIONS FOR BATTERIES . . . .
CAUTION: To reduce the risk of
fire or personal injury. read and
follow these instructions.
CONTAINS NICKEL- CADMIUM
i ‘ \ BATTERY. BATTERY MUST BE
hwy RECYCLED on DlSPDS an or
I’m PROPERLY.
‘l Use only a Southwestern Bell
Freedom PlumeG approved battery
pack in the handset of you cordless
telephone.
FOR HANDSEI' UNIT:
GPGOAASGBMX 3.6V GOOmA GF’I
INTERNATIO TED
2. Do not disposed of the artery in a fire.
as it may explode. Check with local
codes for possible special disposal
Is MAz/M/sgiflx
placed near or over a radiator or heat
register. The product should not be
placed in a built—in installadon unless
proper ventilation is provided.
7A This product should be operated only
from the type of power source
indicated on the marking label. it you
are not sure of the type of power
supply to your home, consult your
dealer oi local power company
8. Do not allow anything to rest on the
power cord Do not locate this product
where the card will be damaged by
persons walking on it,
9. Do not overload wail outlets extension
cards. as this can result in lire or
electric shock
10.Never push objects of any kind into
this product though cabinet slots, as
they may touch dangerous voltage
pomts or short out parts. This could
results in fire or electric shock,
11.To reduce the risk oi electric shock,
do not disassemble this product.
Instead, when some repairwork is
requimd. take the unit to a qualified
technician. Opening or removing
covers may expose you to dangerous
voltages or other risks.
incorrect reassembly can cause
electric shock when the appliance is
subsequently used.
instructions.
3. Do not open or mutilate the battery
Released electrolyte is corrosive and
may cause damage to the eyes and
skin. It may be toxic If swallowed.
4 Exercise care in handing batteries in
order not to short the battery with
conducting materials such as rings.
bracelets and keys. The battery or
conduction material may overheat and
cause burns.
S, Charge the battery(les) provided with
or identified for use With this product
oniy in accordance with the instructions
and limitation specified in this manual.
6. Observe proper polarity orientation
between the Battery Pack and battery
charger.
12 unplug this product from the wall
outlet and refer servicing to qualified
service person nel under the toiimivi ng
conditions:
a. When the power supply cord or
plug is damaged or frayed.
o. if liquid has been spilled into the
product.
c it the product has been exposed to
rain or water.
d. lithe product does not operate
normally and proper operating
instructions have been followed.
adjust only those controls that are
covered by the operating
instmctions. Improper adjustment
of other controls may result in
damage and will often require
extensive work by a qualified
technician to restore the product to
normal operation
e. ifthe product has been dropped or
cabinet has be damaged.
t lithe product exhibits a distinct
change in performance.
13.Avoid using telephone (otherthan a
cordless type) during an electrical
storm. There may be a remote risk of
electrical shock from lightning.
14.00 not use the telephone to report a
gas leak in the vicinity ofthe leak,
SAVE THESE INSTRUCTIONS
\The EPA certified Reno“!
\Baltery Rem/cling Seal on the l
M mm (meal battery ‘
w indicates Soulhwestem Bell
Freedom Phone “1
Retail Sales is voluntarily participating
in an Industry program to collect and
recycle these batteries at the end cftheir
usefiJiIile. mentekenoutofservioehthe
United States or Canada. The Reno“ ‘
program provides a omvenientdtiermfive
-|o placing used Ni-Cd batteries into the
trash or the municipal waste stream,
Which may be illegal' in your area. Please
-cell 1- BOO-G-BATTERY for information on
Ni—Cd battery rep/cling and dwl barrel
restrictions in your area. Southwemn
Bell Freedom Phone” Retail Sales'
involvement in lhis program is part oi our
commitment to preserving our environment
and conserving our natural resources.
RBRC" is a trademark of the mmargeabie
Battery Recycling Corporation.
FCCWANTSYOUTOKNOW.......................
This equipmenl compiles with Part 68 of
the FCC nlles. On the bottom oi the base
of this equipment is a label that contains.
among other information. the FCC
Regisn-ation Nunroer. Ringer Equivalence
number (REN) and the Universal Service
Order Code (USOC), which is RJ-1‘IC.
for this equipment. You must. upon
recluest, provide this information to your
telephone company.
The REN is useiul to determine the
quantity or devices you may connect to
yourtelephone line and still have all of
those devices ring when your telephone
number is called. in most, butnot all
areas, the sum of the RENs of all devices
connected to one line should not exceed
five (5.0). To be certain of the number of
devices you may connect to your line. as
determined by the REN, you should
contact your local telephone company to
determine the maxrrnurn REN for your
calling area,
If your telephone equipment causes
harm to the telephone network, the
telephone company may discontinue
your service temporarily. if possible, they
wtll notify you in advance. But if advance
notice isn't practical, you will be notified
as soon as possible. You will be informed
of your right to file a complaint with FCC.
Yourtetephone company may make
changes in its facilities. equipment,
operations, or procedures that could
affect the proper functioning of your
equipment. ltthey do, you will be notified
in advance to give you an opportunity to
maintain uninterrupted telephone
service. ifyou experience tmuble with th's
telephone equipment, disconned from
the network until the problem has been
corrected or until you are sure that the
equipment is not malfunctioning.
This equipment may not be used on coin
service provided by the telephone
company. Connection to party lines is
subject to state tsrirls,
WARNING: Changes or modifications to
this unit not expressly approved by the
party responsible tor compliance could
void the users authority to operate the
equipment.
NOTE: This equipment has been tested
and found to comply with the limits for
LIMITEDWARRANTY.............
This Southwestern Bell Freedom
Phonaois warranted to the original
purchaser to be free from defects in
materials and workmanship under
normal installation, use and service for
a period atone (7) year from the date of
purchase as shown on the purchasers
receipt.
The obligation of Southwestern Bell
Freedom Phone® Retail Sales under
this wananty shall be limited to repair or
replacement (at our option) during the
warranty period of any part whim proves
defective in material or workmanship
under normal installation. use, and
service, provided the product is returned
to Soulhwestem Bell Freedom Phone®
Retail Sales TRANSPORTATION
CHARGES PREPAID (California
residents call LEGO-36643937 for
shipping instruction). lt we choose to
replace your Southwestern Bell
Freedom Phone® product, the
replacement will be warranted for either
(a) 90 days or (b) the remainder of the
original one year warranty
period. whichever is longer Battery packs
are warranted for the same time period.
Products returned to us must be
accompanied by a copy of the purchase
receipt in the absence of such purchase
receipt, the warranty period shall be one
(1 ) year from the date ct manufacture.
To obtain service under this warranty,
return the defective product to the service
center nearest you together with your
sales slip and $9 50 for postage and
handling (California residents need only
provide proof or purchase).
This warranty shall be invalid It the
product is damaged as a result of
defacement. misuse. abuse, neglect.
accident, destmotion, or alteration of the
serial number, improper electrical
voltages or currents, repair alteration or
maintenance by any person or party
other than our own sewice facility or an
authorized Service Center, or any
violation of instructions furnished by us.
This warranty is also rendered invalid if
this product is removed from the country
in which it was purchased, it it is used in
a country which it is not registered for
use, or if it is used in a country for which
Class 8 digital device, pursuant to Fail
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference in
a residential installation. Some cordless
telephones operate at frequencies that
may cause interierence to near by TV‘s
and VCR‘s. To minimize or prevent such
interference, the base of the cordless
telephone should not he placed nearer
on top ofa TV or VCR; and. iiinterfereme
is experienced, moving the Cordless
Telephone father away from the TV or
VCR will eften reduce or eliminate the
interferenml NOTiCE TO HEARING AlD
WEARERS: This Cordless Telephone
has been registered with the FCC as
hearing and compatible
However, there is no guarantee that
interierence will not occur in a particular
inshllaticn. It this equipment does muse
han'nlul interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try~to correct the
interference by one or more of the
it was not designed. Due to variation in
tetephone systems and communications
laws, this product may be illegal for use
in some countriee.Southwestern Bell
Freedom PhoneQ Retail sales assumes
no responsibility for damages or
penalties incurred resulting from the use
of this product in a manner or location
other than thatfror'n which it is intended
This oneyear limited warranty is in lieu
at all other express warranties,
obligations, or liabilities. ANY iMPLIED
WARRANTIES, OBLIGATIONS OR
LIABILITIES, lNCLLlDlNG BUT NOT
LIMlTED TO THE lMPLlED
WARRANTlES, OF MERCHANTABILITY
AND FlTNESS FOR A FARTiCULAR
PURPOSE, SHALL BE LIMITED IN
DURATION TO THE ONE~YEAR
DURATION OF THiS WRITTEN
LIMITED WARRANTY. SOME STATES
DO NOT ALLOW LlMlTATlONS ON
HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATiONS
MAYNOTAF’PIfiTOVOUJNNO-E'PECIAL.
SHALL WE LIABLE FOR ANY SPECIAL,
lNCIDENTAl. OR CONSEQUENTIAL
follmrling measures:
- Reoriem or relocate the receiving
antenna.
- Increase the separation between the
equipment and receiver.
- Cunnect the equipment rnte an outlet
on a circuit difierent from thatto which
the receiver is connected.
' Consult the dealer or an experienced
radio TV techntu‘an tor help,
DAMAGES FOR BREACH OF THlS OR
ANY OTHER WARRANTY,
EXPRESSED OR lMPLlED.
WHATSOEVER,
This warranty gives you specific legal
rights. and you may also have utherrighis
which vary from state to state.
OPERATION....................
AutoScan Operation
The FFSDSSHIFFQOBSHIFFBWSH/
FFQOSSH mdesteleptfltealmrmfimlly
searches and selects the clearest
_ channel when it is being used.
Security Code
The sewr‘rty code prevents your ccntless
telephone conversation from being
accessed by a phone on e citierenl line.
Once the handset battery is fully
charged, the handset wit! eutcmaticeliy
setect the code from a total at over
35,000 combinations. The code is
crowed every time the handset is piano
in the mettle.
ti you experience ditficutty with placing
or renewing calls, a lost security code
may be the cause of the problem Man
this occurs, the handset can no longer
communicate with the base for 5-10
seconds. If that does not Work. unplug
the AC adaptor trurn the wall outlet
Disoon heat the hanusat battery for 5—1 0
seconds. then reconnect. Place handset
back on base and then replug the AC
adapter.
Placing Call
1. Press TALK button
2. TALK LED on hangset will lighl,
3. When you hear a dial tone, place
your call.
4. Write on a call. if you experience horse
or static:
a. Press CHANNEL on handset until
a deer channel rs found; the wllwith
not be interrupted.
or
b. Move closer to base.
Note: You must be in usable range to
change chan nets. Base antenna should
be in upright position.
Receiving a Call
1. IF THE HANDSEI' IS OUT OF THE
BASE UNIT, press TALK.
2. IF THE HANDSET IS IN THE BASE
UNlT, Wt the handset.
Do not press TALK buttbnflou will
automatically be connected.
Ending a Catt
1. Piece the tenant in the base or press
TALK to be dismnneded trum the line.
2. TALK LED on handset wzll tum alt.
Flash
Use the MH button to activate custom
calling services such as Call Waiting or
Three-Way Calling (“Special subscripfinn
from yeur local telephone company
required).
Temporary ToneC')
PULSE irmry) service users may
access touch-tone features needed to
operete answering machines or use
electronic banking. calling cars. etc. by
pressing the TONE (‘) button. Phone will
automatcally return to putse dialing after
the cell ends.
Out of Range
If you expennnce static while using the
telephone. move closer to the bees or
change the channel by pressing the
CHANNEL button. It hanflsel ”is out at
usable rangel'ALK LE) will blink and
e weming tone witl sound.
Radial
Last number dialed [unto 32 digits) IS
stored in redial memory until another
number is dialed.
1, Press TALK button on handset.
2, When you hear-a rtral tone, press
REDlAL button.
Pause
A 4 second PAUSE may be inserted into
the speed dialing of telephone numbers.
Press PAUSE button at required point
oun‘ng storage of a number in memory
or dialing.
Page I Handset Locator
Send a signal from the base lo handset.
Press PAGE button on base, and the
handset vull mg for 0— seoond Press
the TALK buttnn or relum the h dost to
the base to cancel the page.
an)? “grim-k.
M-nv Bum)": Pres. b m
phanfl numbers in mmnry or in
call a numberyou have slaved
Receiver Volume Com:
Adina! Listen in; level in Norm,
or High
mnw emcees-r the phone
runs on or runs err. .
When we manager is in me OFF
mode. the TALK button will flash to
Alan you at a new cell
to tone
Flllle Bunch: Presets ——l_ i
mean a Hemnd pause
into the speed dialing of
relennone numbers
Thlk Emu: Light on
indicated line is in use,
Tlmwmry Tend") Billion:
Pics is temporarily change
the dialing mode horn puls-
Memory Feature
Store up to 10 number in memory for
quick dialing.
To Program Frequency Called
Numbers
I. Pick up handset. with TALK LED Off,
2. Press MEMO (MEMORY) button.
3. Dial phone number (up in 16 digits).
4. Press MEMO button again.
5. Press a number key (0-9) hr the
memory location where the number is
to be stored.
6. A beep will confirm the number has
bEen successfully stored.
7. Record numbers to be speed dialed
on memory index label, which can be
adhered to the base or other desired
locations.
who
Nole: if a 17th digit is accidentally
pressed or a pause of more than 30
ssoonds occurs during programming, on
error tone will sound. Try again. Each
TONE(*) or PAUSE entered uses one of
the 18 available memory digits.
Change astoreu Number
Replace a stored number by
programming a new number in is place.
Dialing a Numbersmred in Memory
1. Lift hand set. Press TALK bunch.
2. With TALK button lit. press MEMO
button.
3. Press memory lmtion (0~9) assigned
to number being called.
Ch-nnal euuon: Pass to
change the operating mannei
when you mar interference.
Raul-l Button: Piece to
redial the I!!! number you
_ Mui- aunan: Bresa m
prevenl me Elie? 1mm
hearing anon; conversations.
Finn Button: Press in
answers-- incoming mil ir
you have Call Waning.
Chllv'eoflhm: For charging
' T a... i in. battery in the HANDSEI‘.
TROUBLESHOOTING................................
If you experience difficulty operating
your cordless phone, try the suggestions
below.
If the trouble parses, eali the Smilhwfilflm
Bell Freedom ane®Reaii Sate: To! Free
Help line at 1-500-366-0937, Monday-
Friday 8.30 Alli-9:00 PM. and Saturday
8:30 AM-12;30 (EST):
You can also visit our website at
http:/Iwww.swaraadomphone.com
The unit will not operate!
no dial tone:
' Make sure TALK LED is Ilt.
' Make sure AC adapter is plugged into
base unit and wall outlet.
~ Make sure telephone line card is
plugged inlu wall jack.
- Make sure base antenna 15 in upright
position.
' Make sure handset battery is fully
charged.
' Make sure you have selected correct
dialing made, tone (touch) or pulse
(rotary).
' Make sure you are within usable range
of the base station.
' Reset security code by placing handset
in base for 5-10 seconds
The phone does not ring
when you receive a call:
- Make sure the RlNGER switch on left
side at handset is tun-led to ON.
- Make sure AC adaptor is plugged into
base unit and wall outlet.
' Make sure telephone line cord is
plugged into well jack.
. Make sure you are within usable range
of the base station.
- You might have loc many extensian
phones on your line. Try unplugging a
tew,
Noise, static, interference
or other calls heard while
using handset:
- Try changing channels.
- Make sure base antenna is in upright
position.
- Make sure you are within usable mnge
of the base station.
' Make sure AC adapter is not plugged
into wall outlet with other appliances.
- Try relocating base unit to another
location.
. Make sure handset battery is fully
charged.
Phone will not hold charge:
- Make sure charging contacts on the
handset and base are tree of dust and
dirt. Clean contacts with a so“ cloth.
- Make sure CHARGE LED on base is lit
when handset is in cradle.
, if necessary, replace handset battery.
(See Handset Battery Charging)
Difficulty in placing or
receiving calls:
‘ Move closer tc base and try again,
- it moving closer/doesn‘t work you may
have lost security code. Reset code by
placing handset back on base for 5-10
seconds. (See Security Code section)
- Make sure you have selected correct
dialing mode, tune cr pulse.
- Make sure AC adapter is not plugged
into wall outlet with other appliances.
Disconnect for 5-10 seconds then
reconnect. Place handset back on base
and than raplug AC adapter.
~ Make sure handset battery is fully
charged:
INSTALLATION
[Bellman
1. Never install a telephone durmg a lightning storm.
2. Never Install a telephone in a wet location.
3. Never touch unlnsulated telephone wires or terminals
4. Use caution when installing a Ielephone line,
Standard Outlet Modular Jack
Charging
Conlaas Lune Cord
Base Antenna
Ac Adapmr
Dial Mode Swilcn
(lone/Pulse]
120 Volt Outlet! Wall Mount Installation
Telephone Jack
Base unlt may be mounled on a slandard
wall plate.
1, This phone requires a modular phone i . Insert Ac adaplur into back of base
jack (RJll) and a standard 120 volt unit.
outlet. 2. Insen one end of snarl line ward into
2. Plug phone directly lnlo outlet. heck of base unit passing ll‘ne cord
3. Do not plug other appliances lnlo outlet through groove.
or have outlet controlled by a wall 3. Plug oiher 8nd of Ilne cord ‘mto
switch. modular jack.
4 Mount base on wall plate studs and
gently press until (he unil locks ln
place.
5. Plug AC edeplor directly into standard
120 volt outlet,
Telephone
AC Adaptor Jack
‘ Desk Top Installation
1. Plug one and of Ilne cord into back of
base unit.
2. Plug other end of line card lrrlo modular
jack
3. Press unliI locklng lever clicks.
4. Connect AC adaptor lnlo back at unit
and plug directly into standard ‘lZO volt
outlet.
INSTALLATION
Antennas
Adjust base antenna to upright
position.
l .
Receiver Volume Control
Set switch (left side at handset) to
NORM or HIGH.
Set Tone/Pulse Switch
Set switch (back of base) tn correct
dialing mode TONE or PULSE.
Please week with local phone company
if uncertain 01 type at service,
Rlnger On/Ofi
Set switchflell side of handset) to ON or
OFF. Ringer switch must be ON for
handset to ring during incoming calls.
Even when the Ringer switch is OFF,
the handset TALK button and base IN
USE LED will flash during an incoming
call.
Handset Battery Charging
The battery pack in the handset must be
fully charged 10—14 hours before using
, 1JVI’T— im'fiq the telephone for the first time.
t. Place handset in base. The CHARGE
LED on base will light.
2. After batten es are fully charged, check
for dial tone by pressing TALK on
he rid set
3. When handset battery gels low. there
will be 2 beeps every 15 seconds, The
TALK BUTTON will flash. Return to
cradle for charging.
4. if battery becomes low while you are
on a all, you will be disconnected after
about 2 minutes. Terminate the call
quickly and recharge battery.
cue-gm; ngm
Charging Contact
To recharge baflery pack, place handset
in base and:
‘I, Make sure coniacl Dorms are louching
and CHARGE LED is lit.
2. Be caretul not to short battery with
conducting materials such as rings,
bracelets and keys.
Replace battery every 2 years, Use only
a Southwestern Bell Freedom Phene
approved NEad beflery in your cordless
phone.
To Replace Battery
1 2. install new
battery.
‘ 3. Close battery
i . cover. Charge
. 10-14 hours
before first
use.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2000:07:12 17:43:39+08:00
Create Date                     : 2000:07:12 17:40:01+08:00
Creator                         : Acrobat 4.0 Scan Plug-in for Windows
Producer                        : Acrobat 4.0 Scan Plug-in for Windows
Page Count                      : 8

EXIF Metadata provided by EXIF.tools