Continental Conair GH3000ATA 2.4GHz 40 Channel Analog Modulation Cordless Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	304508
Application ID	ayAYlnTMQ6hxWsVILkJxfQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.67kB (320918 bits)
Date Submitted	2003-02-22 00:00:00
Date Available	2003-02-22 00:00:00
Creation Date	2002-02-27 14:40:25
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2002-02-27 14:40:25
Document Title	User Manual

IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING YOUR TELEPHONE
EQUIPMENT,
BASIC
SAFETY
PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK AND
INJURY TO PERSONS, INCLUDING
THE FOLLOWING:
1. Read and understand all instructions.
2. Follow all warnings and instructions
marked on the product.
3. Unplug this product from the wall
telephone jack and power outlet before
cleaning. Do not use liquid cleaners or
aerosol cleaners. Use damp cloth for
cleaning.
4. Do not use this product near water; for
example, near a bathtub, wash bowl,
kitchen sink, laundry tub, swimming
pool, or in a wet basement.
5. Do not place this product on an
unstable cart, stand or table. The product
may fall, causing serious damage to the
product.
6. Slots or openings in the cabinet and
the back and bottom are provided for
ventilation, to protect it from overheating.
These openings must not be blocked or
covered. The openings should never be
blocked by placing the product on the
bed, or other similar surface. This
product should never be placed near or
over a radiator or heat register. This
product should not be placed in a built-in
installation unless proper ventilation is
provided.
7. This product should be operated only
from the type of power source indicated
on the marking label. If you are not sure
of the type of power supply to your
home, consult your dealer or local power
company.
8. Do not allow anything to rest on the
power cord. Do not locate this product
where the cord will be damaged by
persons walking on it.
9. Do not overload wall outlets extension
cords, as this can result in fire or electric
shock.
10.Never push objects of any kind into
this product through cabinet slots, as
they may touch dangerous voltage
points or short out parts. This could result
in fire or electric shock.
Never spill liquid of any kind on this
product.
11.To reduce the risk of electric shock, do
not disassemble this product. Instead,
when some repair work is required, take
the unit to a qualified technician. Opening
or removing covers may expose you to
dangerous voltages or other risks.
Incorrect reassembly can cause electric
shock when the appliance is
subsequently used.
12.Unplug this product from the wall
outlet and refer servicing to qualified
service personnel under the following
conditions:
a. When the power supply cord or plug
is damaged or frayed.
b. If liquid has been spilled into the
product.
c. If the product has been exposed to
rain or water.
d. If the product does not operate
normally and proper operating
instructions have been followed,
adjust only those controls that are
covered by the operating instructions.
Improper adjustment of other controls
may result in damage and will often
require extensive work by a qualified
technician to restore the product to
normal operation.
e. If the product has been dropped or
cabinet has been damaged.
f. If the product exhibits a distinct
change in performance.
13. Avoid using telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electrical
shock from lightning.
14. Do not use the telephone to report a
gas leak in the vicinity of the leak.
15.Use only the power cord and batteries
indicated in this manual. Do not dispose
of batteries in a fire. They may explode.
Check with local codes for possible
special disposal instructions.
CAUTION
Danger of explosion if battery is
incorrectly replaced.
Replace only with the same or
equivalent type recommended by the
manufacturer.
Dispose of used batteries according to
the manufacturer’s instructions.
SAVE THESE INSTRUCTIONS
SAFETY INSTRUCTIONS FOR BATTERIES
CAUTION: To reduce the risk
of fire or personal injury, read
and follow these instructions.:
CONTAINS NICKEL-CADMIUM
BATTERY. BATTERY MUST BE
RECYCLED OR DISPOSED OF
PROPERLY.
1. Use only a Southwestern Bell
Freedom Phone® approved
battery pack in the handset of
your cordless telephone.
FOR HANDSET UNIT:
a. GP40AAK3BMX 3.6V 400mAHr
GPI International Ltd. or
b. D-2/3AA400x3 3.6V 400mAHr.,
BYD Battery Co. Ltd.
2. Do not open or mutilate the
battery. Released electrolyte is
corrosive and may cause damage
to the eyes and skin. It may be toxic
if swallowed.
3. Exercise care in handling batteries
in order not to short the battery
with conducting materials such as
rings, bracelets and keys. The
battery or conduction material
may overheat and cause burns.
4. Charge the battery (ies) provided
with or identified for use with this
product only in accordance with
the instructions and limitations
specified in this manual.
5. Observe
proper
polarity
orientation between the Battery
Pack and battery charger.
The EPA certified RBRC®*
Battery Recycling Seal on
the nickel-cadmium (NiCd) battery indicates that
Southwestern
Bell
Freedom
Phone® Retail Sales is voluntarily
participating in an industry program
to collect and recycle these batteries
at the end of their useful life, when
taken out of service in the United
States or Canada. The RBRC ®
program provides a convenient
alternative to placing used Ni-Cd
batteries into the trash or the
municipal waste stream, which may
be illegal in your areas. Please call 1800-8-BATTERY for information on
Ni-Cd battery recycling and disposal
bans / restrictions in your area.
Southwestern
Bell
Freedom
Phone® Retail Sales involvement in
this program is part of our
commitment to preserving our
environment and conserving our
natural resources.
*RBRC® is a registered trademark of
the Rechargeable Battery Recycling
Corporation.
FCC WANTS YOU TO KNOW
This equipment compiles with Part 68
of the FCC rules and ACTA technical
requirements. On the bottom of the
base of this equipment is a label that
contains, among other information,
the FCC Registration Number, Ringer
Equivalence Number (REN) and the
Universal Service Order Code
(USOC), which is RJ-11C, for this
equipment. You must, upon request,
provide this information to your
telephone company.
An FCC compliant telephone cord
and modular plug is provided with this
equipment. This equipment is
designed to be connected to the
telephone network or premises wiring
using a compatible modular jack
which is TIA/EIA-IS-968 compliant.
See Installation Instructions for details.
The REN is useful to determine the
quantity of devices you may connect
to your telephone line and still have
all of those devices ring when your
telephone number is called. In most,
but not all areas, the sum of the
REN’s of all devices connected to
one line should not exceed five (5.0).
To be certain of the number of
devices you may connect to your
line, as determined by the REN, you
should contact your local telephone
company to determine the maximum
REN for your calling area.
If your telephone equipment causes
harm to the telephone network, the
telephone company may discontinue
your service temporarily. If possible,
they will notify you in advance. But if
advance notice isn’t practical, you
will be notified as soon as possible.
You will be informed of your right to
file a complaint with the FCC.
Your telephone company may make
changes in its facilities, equipment,
operations, or procedures that could
affect the proper functioning of your
equipment. If they do, you will be
notified in advance to give you an
opportunity to maintain uninterrupted
telephone service. If you experience
trouble
with
this
telephone
equipment, disconnect from the
network until the problem has been
corrected or until you are sure that
the equipment is not malfunctioning.
This equipment may not be used on
coin service provided by the
telephone company. Connection to
party lines is subject to state tariffs.
This equipment is hearing aid
compatible.
WARNING:
Changes
or
modifications to this unit not
expressly approved by the party
responsible for compliance could
void the user’s authority to operate
the equipment.
NOTE: This equipment has been
tested and found to comply with the
limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable
protection
against
harmful interference in a residential
installation.
Some
cordless
telephones operate at frequencies
that may cause interference to
nearby TV’s and VCR’s. To minimize
or prevent such interference, the
base of the cordless telephone
should not be placed near or on top
of a TV or VCR. If interference is
experienced, moving the cordless
telephone farther away from the TV or
VCR will often reduce or eliminate the
interference. However, there is no
guarantee that interference wi
occur in a particular installatio
this equipment does cause ha
interference to radio or telev
reception, which can be determ
by turning the equipment off an
the user is encouraged to t
correct the interference by on
more of the following measures
• Reorient or relocate the rece
antenna.
• Increase the separation bet
the equipment and receiver.
• Connect the equipment int
outlet on a circuit different
that to which the receiv
connected.
• Consult the dealer or
experienced radio TV techn
for help.
country for which it was not
designed.
Due to variations in
telephone
systems
and
communications laws, this product
may be illegal for use in some
countries.
Southwestern Bell
Freedom Phone® Retail Sales
assumes no responsibility for
damages or penalties incurred
resulting from the use of this product
in a manner or location other than
that from which it is intended.
This one-year limited warranty is in
lieu of all other express warranties,
obligations, or liabilities.
ANY
IMPLIED
WARRANTIES,
OBLIGATIONS, OR LIABILITIES,
INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE,
SHALL BE LIMITED IN DURATION
TO THE ONE-YEAR DURATION OF
THIS WRITTEN LIMITED WARRANTY.
SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATIONS MAY NOT
APPLY TO YOU.
IN NO EVENT SHALL WE BE LIA
FOR ANY SPECIAL, INCIDENTA
CONSEQUENTIAL DAMAGES
BREACH OF THIS OR ANY OT
WARRANTY,
EXPRESSED
IMPLIED, WHATSOEVER.
This warranty gives you specific
rights, and you may also have
rights which vary from state to s
LIMITED WARRANTY
This Southwestern Bell Freedom
Phone® is warranted to the original
purchaser to be free from defects in
materials and workmanship under
normal installation, use, and service
for a period of one (1) year from the
date of purchase as shown on the
purchaser’s receipt.
The obligation of Southwestern Bell
Freedom Phone® Retail Sales under
this warranty shall be limited to repair
or replacement (at our option) during
the warranty period of any part which
proves defective in material or
workmanship
under
normal
installation, use, and service,
provided the product is returned to
Southwestern
Bell
Freedom
Phone®
Retail
Sales
TRANSPORTATION
CHARGES
PREPAID (California residents call 1800-366-0937
for
shipping
instructions). If we choose to replace
your Southwestern Bell Freedom
Phone® product, the replacement
will be warranted for either (a) 90
days or (b) the remainder of the
original one year warranty period,
whichever is longer. Battery packs
are warranted for the same period.
Products returned to us must be
accompanied by a copy of the
purchase receipt. In the absence of
such purchase receipt, the warranty
period shall be one (1) year from the
date of manufacture. To obtain
service under this warranty, return the
defective product to the service
center nearest you together with your
sales slip and $9.50 for postage and
handling (California residents need
only provide proof of purchase).
This warranty shall be invalid if the
product is damaged as a result of
defacement, misuse, abuse, neglect,
accident, destruction, or alteration of
the serial number, improper electrical
voltages or currents, repair alteration
or maintenance by any person or
party other than our own service
facility or an authorized Service
Center, or any violation of instructions
furnished by us.
This warranty is also rendered invalid
if this product is removed from the
country in which it was purchased, if
it is used in a country which it is not
registered for use, or if it is used in a
ate tariffs.
aring aid
ges
or
unit not
the party
nce could
to operate
has been
ply with the
tal device,
FCC Rules.
to provide
against
residential
cordless
requencies
erence to
o minimize
rence, the
telephone
r or on top
rference is
e cordless
m the TV or
iminate the
here is no
ce will not
was not
riations in
and
is product
in some
tern Bell
tail Sales
ibility for
incurred
his product
other than
ed.
rranty is in
warranties,
es.
ANY
RRANTIES,
ABILITIES,
MITED TO
NTIES OF
FITNESS
PURPOSE,
DURATION
ATION OF
WARRANTY.
OT ALLOW
LONG AN
ASTS, SO
S MAY NOT
OPERATIONS
occur in a particular installation. If
this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to
correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
• Consult the dealer or an
experienced radio TV technician
for help.
40-Channel Operation
Receiving a Call
The
GH3000
cordless
telephone
automatically searches and selects the
clearest of 40 channels when it is being
used.
1. IF THE HANDSET IS OUT OF THE
BASE UNIT, press TALK.
Security Code
The security code prevents your cordless
telephone conversation from being
accessed by a phone on a different line.
Once the handset battery is fully charged,
the handset will automatically select the
code from a total of over 65,000
combinations. The code is changed every
time the handset is placed in the cradle.
If you experience difficulty with placing or
receiving calls, a lost security code may be
the cause of the problem. When this
occurs, the handset can no longer
communicate with the base. Reset by
placing handset on base for 5-10 seconds.
If that does not work, unplug the AC
adaptor from the wall outlet. Disconnect
the handset battery for 5-10 seconds, then
reconnect. Place handset back on base
and then replug the AC adaptor.
Placing a Call
1. Press TALK button.
2. TALK BUTTON on handset will light.
IN NO EVENT SHALL WE BE LIABLE
FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR
BREACH OF THIS OR ANY OTHER
WARRANTY,
EXPRESSED
OR
IMPLIED, WHATSOEVER.
This warranty gives you specific legal
rights, and you may also have other
rights which vary from state to state.
3. When you hear a dial tone, place your
call.
4. While on a call, if you experience noise
or static:
a. Press CH on handset until a clear
channel is found; the call will not be
interrupted.
Or
b. Move closer to base.
Note: You must be in usable range to
change channels. Base antenna should be
in upright position.
2. IF THE HANDSET IS IN THE BASE
UNIT, lift the handset.
Do not press TALK. You will
automatically be connected.
Ending a Call
1. Place the handset in the base or press
TALK to be disconnected from the line.
2. TALK BUTTON on handset will turn off.
Flash
Use the FLASH button to activate custom
calling services such as Call Waiting or
Three-Way Calling (*Special sub-scription
from your local telephone company
required).
Temporary Tone (*)
PULSE (rotary) service users may access
touch-tone features needed to operate
answering machines or use electronic
banking, calling cards, etc., by pressing
the TONE (*) button. Phone will
automatically return to pulse dialing after
the call ends.
Out of Range
If you experience static while using the
telephone, move closer to the base or
change the channel by pressing the CH
button.
Redial
Last number dialed (up to 32 digits) is
stored in redial memory until another
number is dialed.
1. Press TALK on handset.
2. When you hear a dial tone, press
REDIAL.
Pause
Memory Feature
A 4-second PAUSE may be inserted
into the speed dialing of telephone
numbers. Press REDIAL button at
required point during storage of a
number in memory.
Store up to 10 numbers in memory
for quick dialing.
Page / Handset Locator
Send a signal from the base to
handset. Press PAGE button on base
and a series of rings will sound from
handset.
To locate the handset (if it is away
from the base), press and hold the
PAGE button for about 5 seconds. A
series of rings will sound for
approximately 60 seconds. Return
the handset to the base or press the
TALK button to cancel the page.
To Program Frequently Called
Numbers
1. Pick up handset, with TALK off.
2. Press MEM (MEMORY) button.
3. Dial phone number (up to 16 digits).
4. Press MEM button again.
5. Press a number key (0-9) for the
memory location where the
number is to be stored.
6. A long beep will confirm the number
has been successfully stored.
7. Record numbers to be speed
dialed on memory index label,
which can be adhered to the base
or other desired locations.
Note: If a 17th digit is accidentally
pressed or a pause of more than 30
seconds occurs during programming,
an error tone will sound. Try again.
Each TONE (*) or PAUSE entered
uses one of the 16 available memory
digits.
Change a Stored Number
Replace a stored number by
programming a new number in its
place.
Dialing a
Memory
Number
Stored
in
1. Lift handset. Press TALK.
2. With TALK button lit, press MEM.
3. Press memory location (0-9)
assigned to number being called.
Antenna
Talk Button : Lights to indicate
line is in use.
Mem Button : Press to store
phone numbers in memory or to
call a number you have stored.
Receiver Volume Control :
Adjust Listening level from Norm,
Mid, or High.
Flash Button : Press to answer an
incoming call if you have Call
Waiting.
Ringer On/Off Control
Temporary Tone (*) Button :
Press to temporarily change the
dialing mode from pulse to tone.
Redial Button : Press to redial
the last number you called.
Also can be used to insert a
PAUSE in speed dialing of long
distance custom numbers.
Charging Contacts : For charging
the battery in the HANDSET.
Mute Button : Press to prevent
the caller from hearing outside
conversations.
Channel Button : Press to change
the operating channel when you
hear interference.
TROUBLESHOOTING
If you experience difficulty operating
your cordless phone, try the
suggestions below.
If the trouble persists, call the
Southwestern
Bell
Freedom
Phone® Retail Sales Toll Free Help
Line at 1-800-366-0937, MondayFriday 8:30a.m.-9:00p.m. EST
Saturday 8:30a.m. - 12:30p.m. EST
http://www.swbfreedomphone.com
The unit will not operate/no
dial tone:
Make sure TALK BUTTON is lit.
Noise, static, interference
or other calls heard while
using handset:
Make sure AC adaptor is plugged
into base unit and wall outlet.
Try changing channels.
Make sure you are within usable
range of the base station.
Make sure AC adaptor is not
plugged into wall outlet with other
appliances.
Try relocating base unit to another
location.
Make sure handset battery is fully
charged.
Make sure telephone line cord is
plugged into wall jack.
Make sure base antenna is in
upright position.
Make sure handset battery is fully
charged.
Make sure you have selected
correct dialing mode, tone (touch)
or pulse (rotary).
Make sure you are within usable
range of the base station.
Reset security code by placing
handset in base for 5-10 seconds.
Make sure the RINGER switch on
handset is turned ON.
Make sure AC adaptor is plugged
into base unit and wall outlet.
Make sure telephone line cord is
plugged into wall jack.
Make sure you are within usable
range of the base station.
You might have too many
extension phones on your line. Try
unplugging a few.
Make sure base antenna is in
upright position.
The phone does not ring
when you receive a call:
Difficulty in placing or
receiving calls:
Phone will not hold charge:
Make sure charging contacts on
the handset and base are free of
dust and dirt. Clean contacts with
a soft cloth.
Make sure CHARGE LED on base
is lit when handset is in cradle.
If necessary, replace handset
battery. (See Handset Battery
Charging)
Move closer to base and try again.
If moving closer doesn’t work, you
may have lost security code.
Reset code by placing handset
back on base for 5-10 seconds.
(See Security Code section)
Make sure you have selected
correct dialing mode, tone or
pulse.
Make sure AC adaptor is not
plugged into wall outlet with other
appliances. Disconnect for 5-10
seconds then reconnect. Place
handset back on base and then
replug AC adaptor.
Make sure handset battery is fully
charged.
INSTALLATION
CAUTION
1.
2.
3.
4.
Never install a telephone during a lightning storm.
Never install a telephone in a wet location.
Never touch uninsulated telephone wires or terminals.
Use caution when installing a telephone line.
Standard Outlet
Modular Jack
AC Adaptor
Telephone Line Cord
AC Adaptor Jack
120 Volt Outlet /
Telephone Jack
1. This phone requires a modular
phone jack (RJ11) and a
standard 120 volt outlet.
2. Plug phone directly into outlet.
3. Do not plug other appliances into
outlet or have outlet controlled by
a wall switch.
Desk Top Installation
Wall Mount Installation
1. Plug the line cord into modular
jack.
Base unit may be mounted on a
standard wall plate.
2. Press until locking lever clicks.
1. Insert AC adaptor into back of
base unit.
3. Connect AC adaptor into back of
unit and plug directly into
standard 120 volt outlet.
2. Plug the line cord into modular
jack.
3. Detach the base mount bracket
and reinstall it into wall mount
position.
4. Mount base on wall plate studs
and gently press until the unit
locks in place.
5. Plug AC adaptor directly into
standard 120 volt outlet.
INSTALLATION
Antennas
Receiver Volume Control
Adjust base antenna to upright
position.
Set switch (left side of handset) to
Norm, Mid or High.
To recharge battery pack, place
handset in base and:
1. Make sure contact points are
touching and CHARGE LED is lit.
2. Be careful not to short battery with
conducting materials such as
rings, bracelets and keys.
Replace battery every 2 years. Use
only a Southwestern Bell Freedom
Phone® approved NiCd battery in
your cordless phone.
Set Tone/Pulse Switch
Handset Battery Charging
Set switch (back of base) to correct
dialing mode TONE or PULSE.
The battery pack in the handset must
be fully charged 10-14 hours before
using the telephone for the first time.
To Replace Battery:
1. R e m o v e
battery cover.
1. Place handset in base. The
CHARGE LED on base will light.
2. Remove old
battery.
2. After batteries are fully charged,
check for dial tone by pressing
TALK on handset.
Please check with local phone
company if uncertain of type of
service.
Ringer On/Off
Set switch (left side of handset) to
ON or OFF. Ringer switch must be
ON for handset to ring during
incoming calls.
3. Plug the cord
of the battery
pack into the
handset
and
place
the
battery in the
case.
3. When handset battery gets low,
there will be 2 beeps every 30
seconds. The TALK BUTTON will
flash. Return to cradle for
charging.
4. If battery becomes low while you
are on a call, you will be
disconnected after about 2
minutes. Terminate the call quickly
and recharge battery.
4. Slide battery
cover until it
clicks in place.
Charge 10-14
hours
before
first use.
Dual Charging
The GH3000 is specially designed
with a dual charge feature. The
battery pack will charge whether the
handset is placed on the base facing
up or facing into the base.
Page Button
Base Antenna
Charging Contacts
In Use/Charge Light
SOUTHWESTERN BELL FREEDOM PHONE®
7475 North Glen Harbor Boulevard, Glendale, AZ 85307
GH3000AT
Printed in China
Fold open this manual for information about this
telephone’s installation and operation.
Please read the Important Safety Instructions
included in this manual.
Southwestern Bell
Freedom Phone®
User’s Manual for Cordless Telephone
GH3000AT
STOP — don't take the unit back to the store.
LOOK — for the toll-free "help" telephone number
LISTEN — as our experts talk you through the problem
For immediate answers to your questions regarding operation,
missing parts or installation, call the
Southwestern Bell Freedom Phone®
Retail Sales Help Line:
1-800-366-0937
Monday - Friday 8:30a.m. - 9:00p.m. EST
Saturday 8:30a.m. - 12:30p.m. EST
http://www.swbfreedomphone.com
IB- 4104

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2002:02:27 14:40:25
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2002:02:27 14:40:25+08:00
Page Count                      : 8

EXIF Metadata provided by EXIF.tools