Contract Datascan LP DSQPID3 QPID User Manual manualx

Download:
Mirror Download [FCC.gov]
Document ID	3649387
Application ID	Nho4XHPzyJrwo/L2quW1QQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	69.93kB (874183 bits)
Date Submitted	2017-11-22 00:00:00
Date Available	2017-11-23 00:00:00
Creation Date	2013-11-11 16:23:43
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2017-11-16 15:06:34
Document Title	Microsoft Word - manual.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	KArnold

User Manual
Product Name: QPID
Brand: DATASCAN
Model:QPID1000,0ADB2D,0ADB2E
Manufacture: ABO Electronics ( Shen Zhen) Co.,Ltd.
Physical Characteristics
Dimensions: 70mm x 170mm x 38mm
General Operation
The unit is turned on and off via the side power button.
The scan engine is activated by pulling the bottom trigger or top scan button during appropriate places
inside of the scan test app.
The volume is change by using the side physical buttons or through software control within the Android
OS.
The side entry SD card slot is used for additional temporary storage
Powering On the Device
Batteries should be inserted matching the orientation etched
on the bottom of the battery compartment.
Battery Specifications:
3.7V 18650 Lithium Polymer Batteries
Only use UL listed batteries that are supplied with the device
Unit Charging Specifications:
5VDC 1A Input via microUSB Port
Once the batteries are inserted, let the unit charge using the micro USB port overnight if this is the first
time powering on the device.
To start and prepare the device, perform these common Android procedures



Press the POWER key to start up the device.
It will boot through a series of screens before booting to the Android home screen
Connect to a WIFI access point with internet access
< ‐‐‐‐ CONTINUE TO THE NEXT PAGE FOR APP INSTRUCTIONS ‐‐‐‐ >
Start the app by hitting the blue icon that says DEV.
Once the app initializes, it will load the Demo App. Press Next to
continue.
On this screen, enter 16 numeric digits and then hit Authenticate.
1111111111111111 is recommended.
On this screen, scan the fixture ID barcode:
On the Scan/Key Barcode screen, you can scan all barcodes that are
UPCA/EAN13. Here is an example below:
When you are done scanning items, hit the “Tap to Close” button
On this screen, select OK to continue and send the fixture to our
servers, or press “Return to Fixture” to scan additional items.
This is what is displayed as the scanner uploads the information that
was scanned
You are now ready to scan another fixture tag
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - manual.docx
Creator                         : KArnold
Create Date                     : 2013:11:11 16:23:43-06:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2017:11:16 15:06:34+08:00
Metadata Date                   : 2017:11:16 15:06:34+08:00
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Document ID                     : uuid:b8eb20a9-3c61-4e9c-8886-7b5158840f43
Instance ID                     : uuid:8fb9c726-43d8-44db-a1d1-83e39b29883e
Page Count                      : 7
Author                          : KArnold

EXIF Metadata provided by EXIF.tools