Contrinex RFM30HF RFID Transponder Reader User Manual Users manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3852406
Application ID	6TXQuFDPDQAIvVy8h2Cm7w==
Document Description	Users manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.38kB (254801 bits)
Date Submitted	2018-05-16 00:00:00
Date Available	2018-05-17 00:00:00
Creation Date	2017-12-05 16:54:49
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-12-05 16:54:52
Document Title	Users manual 1
Document Creator	Adobe InDesign CC 2017 (Windows)

HF RFID SYSTEM
READ/WRITE MODULES (RWM)
RLS-1301-220-120
HOUSING
READ/WRITE DISTANCE
M30
60 mm*
ü M30 Metal threaded housing ü USB RWM using Contriü Sensing face of PBTP
ü Insensitive to dirt
ü ISO15693 compatible
NET protocol
ü Cost optimized solution
* Please refer to table page 4
GENERAL DATA
Carrier frequency
Compatible standard
Maximum transmission speed
Read-write distance max.
INTERFACE
13.56 MHz
ISO 15693
26.5 kbit/s
60 mm with RTP-0501-020
ELECTRICAL DATA
Supply voltage range (Ub)
No-load supply current (field off)
Max. current consumption (no load)
Polling current
Short-circuit protection
Voltage reversal protection
Max. output current
USB/VCP configuration
Data transfer rate
Number of bits 7 / stop bits / parity
RWM configuration
LED yellow on
LED yellow blinking
ContriNET protocol
115 200 baud
8 / 1 / None
RWM live
Transponder detected
ü
MECHANICAL DATA
5 VDC (USB powered)
100 mA
200 mA
120 mA
ü
ü
Protection degree
Ambient temperature range TA**
Storage temperature range TS***
Sensing face material
Housing material
IP67
-25...+70 °C
-25...+70 °C
PBTP
Stainless steel
Connector type / Cable length
Weight (incl. nuts)
USB A male / 2 m
144 g
** Read/write operations possible
*** Data retention and mechanical stability limit
CONTRINEX AG Industrial Electronics
route du Pâqui 5 - P.O. Box - CH 1720 Corminboeuf - Switzerland - Tel: +41 26 460 46 46 Fax: +41 26 460 46 40 - Internet: www.contrinex.com - E-mail: info@contrinex.com
MOUNTING RECOMMENDATIONS
CLEARANCE
Read/write modules must not mutually influence each other. For this reason, a minimum distance of 2 x D between the devices must be observed.
sensing face
2D
10 mm
metal free zone
support
3D
COMMUNICATION SETTINGS
USB/VCP characteristics
Value for RLS-1301-220-120
Data transfer rate (default in bold)
Number of bits
Number of stop bits
Parity
115 200
No
MEMORY STRUCTURE OF THE READ/WRITE MODULE
The Read/Write Module has a user memory of 3200 bits organized in 200 blocks of 16 bits. Each block is addressable separately by means of the
commands Write RWM and Read RWM.
HEX DEC
C7 199
C6 198
C5 197
C4 196
Block-Adressen
Adresses des blocs
Addresses of the blocks
06 006
05 005
04 004
03 003
02 002
01 001
00 000
Byte 1
Byte 0
16 bit
CONTRINEX AG Industrial Electronics
route du Pâqui 5 - P.O. Box - CH 1720 Corminboeuf - Switzerland - Tel: +41 26 460 46 46 Fax: +41 26 460 46 40 - Internet: www.contrinex.com - E-mail: info@contrinex.com
TYPICAL TIMES
Time name
Description
Starting times
Polling time
Execution time of the commands
Value
Time between the powering of the RWM and the end of the first scanning of the
transponders present
Time for actualization of the list of the transponders present. This time depends on the
number of collisions.
The execution time is defined as the time between the end of the sending of the
command and the beginning of the answer
300 ms
70* ms
Command
dependent
*Polling time for 16 transponders without collision
SLK-Strohmversorgung
Alimentation MLE
RWM power supply
Zeit / Temps / Time
Status
TStart
TPoll
Zeit / Temps / Time
Durchsuchen nach laufenden Transponder
Balayage des transpondeurs présents
Scanning of the transponders present
TYPICAL EXECUTION TIMES BY COMMAND TYPE
Command type
Description
Value
Commands related to RWM
Typical execution time
1.5 ms
Commands related to Transponder Typical read duration: TR = T0 + N ·TR0
depending on number of blocks
Typical write duration: TW = T0 + N ·TW0
Duration for decoding the command - T0
Read duration for one block (32 bits) - TR0
Write duration for one block (32 bits) - TW0
Number of blocks concerned - N
Commands related to Transponder Typical execution time
not related to a number of blocks (e.g. Get System Info, Write AFI, Lock AFI, Write DSFID, Lock DSFID, and so on)
Signal
Befehl
Commande
Command
12.0 ms
8.0 ms
12.0 ms
30 ms
Antwort
Réponse
Answer
Zeit / Temps / Time
Ausführungszeit
Temps d'exécution
Execution time
CONTRINEX AG Industrial Electronics
route du Pâqui 5 - P.O. Box - CH 1720 Corminboeuf - Switzerland - Tel: +41 26 460 46 46 Fax: +41 26 460 46 40 - Internet: www.contrinex.com - E-mail: info@contrinex.com
POSSIBLE COMBINATION AND TYPICAL DISTANCE - RLS-1301-220-120
Transponder type
Smax [mm]
S0 [mm]
D0 [mm]
VRmax [cm/s]*
VWmax [cm/s]*
Ø9
Ø 16
Ø 20
Ø 26
Ø 30
Ø 50
Ø 50
Ø 50
Ø 50
14
30
25
31
45
60
50
44.5
42.5
22
110
91.7
10
13
21
27
22
17.5
17
30
36
48
66
56
54
51
150
180
240
330
280
270
255
125
150
200
275
233
225
212.5
RTP-0090-020
RTP-0160-020
RTP-0201-020
RTP-0263-020
RTP-0301-020
RTP-0501-020
RTP-0502-022
RTP-0502-062
RTP-0502-082
*speed values for a distance between RWM and transponder set to S0 and a 32 bits Read or Write operation
D0
2·(Smax - S0)
TR
T0 + N ·TR0
ob / si / if S0 > 0
DC 2·Smax· 1 - 2·S0/Smax
TR
T0 + N ·TR0
ob / si / if S0  0
vRmax =
Working area
Read/Write Module
Transponder
DC D0
D0
2·(Smax - S0)
TW
T0 + N ·TW0
ob / si / if S0 > 0
DC 2·Smax· 1 - 2·S0/Smax
Tw
T0 + N ·TW0
ob / si / if S0  0
S0
VWmax =
Smax
AVAILABLE TYPES
Part number
Part reference
Ø
Mounting
Connection / Cable length
720 100 107
RLS-1301-220-120
M30
Non-embeddable
USB A male / 2 m
DISCLAIMERS
FCC information
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Note:This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
IC information
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d`Industrie Canada applicables aux appareils radio exempts de licence. L`exploitation est autorisée aux
deux conditions suivantes :
(1) L`appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l`appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d`en compromettre le fonctionnement.
Contrinex information
Operators of the products we supply are responsible for compliance with measures for the protection of persons. The use of our equipment in applications where the safety of persons might be at risk is only authorized if the operator observes and implements separate, appropriate and necessary
measures for the protection of persons and machines. Terms of delivery and rights to change design reserved.
CONTRINEX AG Industrial Electronics
route du Pâqui 5 - P.O. Box - CH 1720 Corminboeuf - Switzerland - Tel: +41 26 460 46 46 Fax: +41 26 460 46 40 - Internet: www.contrinex.com - E-mail: info@contrinex.com
RLS-1301-220-120_171124_YAG

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42
Create Date                     : 2017:12:05 16:54:49+01:00
Metadata Date                   : 2017:12:05 16:54:52+01:00
Modify Date                     : 2017:12:05 16:54:52+01:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Instance ID                     : uuid:7554856f-0ba2-49f7-8d78-26be2f5697a4
Original Document ID            : xmp.did:7455C9DD35D0E311B768B6FD92D29AA0
Document ID                     : xmp.id:362ef61c-e923-1943-a34a-a2e9cd5ea147
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:c6fc7ad8-5896-494a-9c6a-179c548d7174
Derived From Document ID        : xmp.did:c6fc7ad8-5896-494a-9c6a-179c548d7174
Derived From Original Document ID: xmp.did:7455C9DD35D0E311B768B6FD92D29AA0
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Windows)
History Changed                 : /
History When                    : 2017:12:05 16:54:49+01:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 4
Creator                         : Adobe InDesign CC 2017 (Windows)

EXIF Metadata provided by EXIF.tools