Control4 C4SR150Z System Remote Control User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1500813
Application ID	qHqvMosgNzG5SwmSEj8AvQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	58.22kB (727793 bits)
Date Submitted	2011-07-14 00:00:00
Date Available	2011-07-14 00:00:00
Creation Date	2017-11-04 22:35:09
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-04 22:35:09
Document Title	Microsoft Word - Regulatory Compliance Statement for SR150B
Document Creator	PScript5.dll Version 5.2.2
Document Author:	rmidgley

Regulatory Compliance & Safety Information for Contol4 Model C4-SR150B-Z-B.
Electrical Safety Advisory
Important Safety Information
Read all safety information before using this product.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time. This
equipment uses AC power which can be subjected to electrical surges, typically lightning
transients which are very destructive to customer terminal equipment connected to AC power
sources. The warranty for this equipment does not cover damage caused by electrical surge or
lightning transients. To reduce the risk of this equipment becoming damaged it is suggested that
the customer consider installing a surge arrestor.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15. Use the mains plug to disconnect the apparatus from the AC mains. The mains plug shall remain
readily operable.
16. To completely disconnect unit power from the AC mains, disconnect the unit’s power cord from
the mains socket. To reconnect power, plug the unit’s power cord into the mains socket following
all safety instructions and guidelines.
17. Caution: Danger of explosion if lithium battery is incorrectly displaced. Replace only with the
same or equivalent type. Battery should only be replaced by qualified personnel and is not
intended as a user serviceable part. Do not expose batteries or battery pack to excessive heat such
as prolonged sunlight, fire or other heat sources.
18. Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in fire or electric shock.
19. This product can interfere with electrical equipment such as tape recorders, TV sets, radios,
computers and microwave ovens if placed in close proximity.
The lightning flash and arrow head within the triangle is a
warning sign alerting you of dangerous voltage inside the
product
Caution: To reduce the risk of electric shock, do not remove
cover (or back). No user serviceable parts inside. Refer
servicing to qualified service personnel.
The exclamation point within the triangle is a warning sign
alerting you of important instructions accompanying the
product.
See marking on bottom / back of product
Warning!: To reduce the risk of electrical shock, do not expose this apparatus
to rain or moisture
AVERTISSEMENT! Pour réduire le risque de choc électrique,
n'exposez pas cet appareil à la pluie ou à l'humidité.
WARNUNG! Um das Risiko des elektrischen Schlages zu verringern,
setzen Sie diesen Apparat nicht Regen oder Feuchtigkeit aus.
Save these instructions
USA & Canada Compliance
FCC Part 15, Subpart B / ICES-003Unintentional Emissions Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules and Industry Canada ICES-003. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules and Industry Canada ICES-003. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
IMPORTANT! Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
IMPORTANT! Tous les changements ou modifications pas expressément approuvés par la partie
responsable de la conformité ont pu vider l’autorité de l’utilisateur pour actionner cet équipement.
Compliance of this equipment is confirmed by the following label that is placed on the equipment:
FCC Part 15, Subpart C / RSS-210 Intentional Emissions Interference Statement
Compliance of this equipment is confirmed by the following certification numbers that are placed on the
equipment:
Notice: The term “FCC ID:” and “IC” before the certification number signifies that FCC and Industry
Canada technical specifications were met.
FCC ID: R33C4SR150Z
IC: 7848A-C4SR150B
This equipment must be installed by qualified professionals or contractors in accordance with FCC Part
15.203 & IC RSS-210, Antenna Requirements. Do not use any antenna other than the one provided with
the unit.
RF Radiation Exposure Statement
This equipment complies with the FCC/IC radiation exposure limits set fourth for portable transmitting
devices operation in an uncontrolled environment. End users must follow the specific operating
instructions to satisfy RF exposure compliance.



The equipment should only be used or installed at locations where there is normally at least a
20cm separation between the antenna and all persons.
This transmitter must not be co-located or operation in conjunction with any other antenna or
transmitter.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
European Compliance
Conformity of the equipment with the guidelines below is attested by the application of the CE mark.
CE Declaration of Conformity
Manufacturer’s Name:
Manufacturer’s Address:
CONTROL4 CORPORATION
11734 S. ELECTION ROAD SUITE 200
SALT LAKE CITY
UT 84020 USA
EU Representative Name:
EU Representative Address:
CONTROL4 EMEA LIMITED
UNIT3, GREEN PARK BUSINESS CENTRE
SULTON-ON-THE FOREST
YORK YO61 IET, UNITED KINGDOM
Product Name(s):
Brand:
Model(s):
System Remote
Contol4
C4-SR150B-Z-B
Product Standard(s) to which Conformity of the Council Directive(s) is declared:
EMC - 2004/108/EC “Electromagnetic Compatibility (EMC) Directive”:
(Emissions) EN 55022:2006, (Immunity) EN 55024:1998, EN 301 489-1:2008 & EN 301 48917:2009
Telecom & Radio - 1999/5/EC Radio equipment and Telecommunications Terminal
Equipment (R&TTE) Directive:
EN 300 328 V1.7.1 (2006-10)
RoHS - 2002/95/EC Restriction of the Use of certain Hazardous Substances in Electrical
and Electronic Equipment (EEE) & WEEE - 2002/96/EC Waste of Electrical and Electronic
Equipment (EEE).
We, the undersigned, hereby declare that the equipment specified above conforms to the above
directives and standards. Date of Issue: June 23, 2011
Legal Representative
Signature
Roger Midgley
Sr. Regulatory Compliance Engineer
National Restrictions
This product may be used in all EU countries (and other countries following the EU directive 1999/5/EC)
without any limitation except for the countries mentioned below:
Ce produit peut être utilisé dans tous les pays de l'UE (et dans tous les pays ayant transposés la directive
1999/5/CE) sans aucune limitation, excepté pour les pays mentionnés ci-dessous:
Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le direttive EU
1999/5/EC) senza nessuna limitazione, eccetto per i paesii menzionati di seguito:
Das Produkt kann in allen EU Staaten ohne Einschränkungen eingesetzt werden (sowie in anderen Staaten
die der EU Direktive 1999/5/CE folgen) mit Außnahme der folgenden aufgeführten Staaten:
France
In case the product is used outdoors, the output power is restricted in some parts of the band. See Table 1
below or check http://www.arcep.fr/ for more details.
Dans la cas d'une utilisation en extérieur, la puissance de sortie est limitée pour certaines parties de la
bande. Voir la table ci-dessous ou visitez http://www.arcep.fr/ pour de plus amples details
Table 1 Applicable Power Levels in France
Location
Frequency Range (MHz)
Power (EIRP)
Indoor (No restrictions)
2400-2483.5
100 mW (20 dBm)
Outdoor
2400-2454
2454-2483.5
100 mW (20 dBm)
10 mW (10 dBm)
Recycling
Control4 understands that a commitment to the environment is essential for a health life and sustainable
growth for future generations. We are committed to supporting the environmental standards, laws, and
directives that have been put in place by various communities and countries that deal with concerns for the
environment. This commitment is represented by combining technological innovation with sound
environmental business decisions.
WEEE Compliance
Control4 is committed to meeting all requirements of the Waste Electrical and Electronic Equipment
(WEEE) directive (2002/96/EC). The WEEE directive requires the manufacturers of electrical and
electronic equipment who sell in EU countries: (1) label their equipment to notify customers that it needs to
be recycled, and (2) provide a way for their products to be appropriately disposed of or recycled at the end
of their product lifespan. For collection or recycling of Control4 products, please contact your local
Control4 representative or dealer.
Australia / New Zealand Compliance
Compliance of this equipment is confirmed by the following label that is placed on the equipment:
South Korea Compliance
해당무선설비기기는 운용
중 전파혼신가능성이 있음
English Translation: This radio device has the possibility of radio interference during operation.
2.4GHz RF Warning Message:
해당무선설비기기는 운용 중 전파혼신가능성이 있으므로 인명안전과 관련된 서비스는 할 수
없습니다
English Translation: This radio device is not allowed to be used for human safety since it has the possibility
of radio interference during operation.
EMC (Class B) Warning Message:
이 기기는 가정용(B급) 전자파 적합기기 로서 주로 가정에서 사용하는 것을
지역에서 사용할 수 있습니다.
적으로 하며,
English Translation: The equipment is for home use (Class B), and has acquired electromagnetic
conformity registration. So it can be used not only in residential area but also other areas.
든

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : rmidgley
Create Date                     : 2011:06:24 16:00:53-06:00
Modify Date                     : 2011:06:30 09:14:40-06:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2011:06:30 09:14:40-06:00
Format                          : application/pdf
Title                           : Microsoft Word - Regulatory Compliance Statement for SR150B
Creator                         : rmidgley
Document ID                     : uuid:f09abc03-a00d-454c-8cdc-bca4003d5380
Instance ID                     : uuid:ed831bbc-28f9-46bf-912f-7bff73c8ea40
Page Count                      : 6

EXIF Metadata provided by EXIF.tools