Control4 C4TSMC7 7"PORTABLE User Manual rev 2

Control4 7"PORTABLE rev 2

user manual rev 2

™Accessories• Control4Power-Over-EthernetInjector(AC-POE1-B),soldseparatelySpecificationsScreen 7”16:9WXGAColorLCDModuleResolution:800x480Brightness:400nits(withoutTouchScreen)Wireless BuiltInIEEE802.11b/g/nWirelessLANIntegralAntenna(b/g/nsupported)Authentication:WEP,WPA,WPA2Dimensions 4.921in.(12.5cm)x7.44in.(18.9cm)x.669in.(1.7cm)Weight 1.75lbs.(.793kg)Network WiFi(802.11b,g,orn)wirelessaccesspoint(WAP)alreadyconguredtocommunicatewithaControl4Controller(e.g.,HC-300).Front and Rear Panel DescriptionsFigure1.FrontView1 Camera.UsedtoviewactivityonanothercompatibleControl4deviceinanotherroom.2 Programmable Buttons (4).UsedtoprogramvarioushomeautomationactivitiesinComposerprogramming.3 Power Button.UsedtopowertheTouchScreenonoro.Alsosee“TouchScreenModes.”4 Touch Screen.ThefrontfaceoftheTouchScreen.5 Reset/Restore Pinhole.Usedtoresetorrestorethefactorydefaults.6 Speaker.UsedforIntercompurposes.7 Headphone Jack (3.5mm).UsedtoconnectheadphonesforIntercompurposes.Supported Models• C4-TSMC7-EN-BL7”PortableTouchScreen,BlackBox ContentsCarefullyunpacktheControl4®7”PortableTouchScreenandensurethefollowingitemsareincludedinthebox.CAUTION! DonotapplyexcessivepressuretotheTouchScreendisplayduringhandling.DoingsocancrackthescreenanddamagetheTouchScreen.• Control47”PortableTouchScreen• Control47”PortableTouchScreenDock• DCPowerAdapter(onlyusethepowersupplyprovided)• (Optional)Two(2)screwsforsecuringthedocktotheTouchScreen• WarrantyCardRequirements• Phillipsheadscrewdriver• Two(2)screws(included)tosecuretheTouchScreentothedock7”PortableTouchScreenSetupGuide412710356289101
™8 Camera LED Indicator.Indicatesifthecameraison.Greenindicatesthecameraison.9 Power LED Indicator.Indicatesifthepowerison.10 Microphones.UsedtospeakintotheTouchScreen.Power and Network ConnectionsBeforeyoubegintoinstallyourTouchScreen,you’llneedtomakeafewdecisions:1 WillyoubeusingtheTouchScreenasaportabledevice(docknotattached)orwiththedockattached?See“PortableorTabletopInstallationOptions”fordetails.2 WillyoubeusingtheDCPowerAdapter(included)orPower-Over-Ethernet(soldseparately)?See“PortableorTabletopInstallationOptions”fordetails.LED IndicatorsTheLEDsontheTouchScreenindicatethestatusofthepowersupply,batterycharge,booting,etc.,asdescribedinthenexttable.LED Color Touch Screen StatusO -Notcharging-Screensavermode,blank-Screensavermode,chargingRed -O,chargingGreen -On,notcharging-Suspend/asleep,notchargingGreen(blinking) -Booting,notchargingGreen(fastblinks) -Restoring,notchargingOrange -On,charging-Suspend/asleep,chargingOrange(blinking) -Bootingwhilecharging7”PortableTouchScreenSetupGuideLED Color Touch Screen StatusOrange(fastblinks)-RestoringwhilechargingNOTES:(1)IfthedeviceisOFF,pressPower.Ifthedeviceisasleep,pressanybuttonortapthescreen.(2)TheTouchScreenmustbeconnectedtoapowersupplyforatleastfour(4)hourssothebatterycanfullycharge.(3)Ifthebatterypoweriscriticallylow,youcanstillturnonthedeviceaslongasthedockispluggedintothepoweradapterorPoE.Figure2.TopViewFigure3.BottomViewFigure4.RightViewHeadphone JackProgrammable Buttons (on right and left sides)SpeakerPower/Charging LEDReset/Restore PinholeMicrophonesCamera LEDPower Button2
NOTE:IfyouuseEthernetandundocktheTouchScreen,youwillloseconnectivityFigure6.BackViewwithPowerConnectionsNOTE:Thepowercordanglestotherightandisheldbytheretainingclip.Whenyouinsertthepowercord,italsosnapsintotheretainingclip.3 InserttheTouchScreenintothedock’sslot.4 WakeuptheTouchScreenbyeithertouchingthescreenorbypressinganybutton.Using the Touch Screen as a Tabletop Device1 Placethe7”PortableTouchScreendockonaatsurface.2 Power.Insertthepowercableintothepowerjackslotonthebackofthedevice(seeFigure6),andthenplugthepowercordintoawalloutlet.ThedevicecanbepoweredusingeitheranEthernetconnectororaPoEconnector.TouseEthernet,plugtheRJ-45connectorintothePoEconnectorandthenintotheEthernetjackonthebackoftheTouchScreendock(seeFigure6).NowyoucanattachtheTouchScreentothedockusingthescrewsprovidedtopreventtheTouchScreenfrombecomingdisconnectedandnonfunctionaleverytimeitisremoved.NOTE:PowerotheTouchScreenbeforescrewinginthescrews.ToattachtheTouchScreentothedockingstation:1 Removethetwo(2)rubberprotectorsfromthescrewholesonthebottomoftheTouchScreen’sFigure5.BackViewwithDockandConnectionsPortable or Tabletop Installation OptionsYoucanusethe7”PortableTouchScreenasaportabledevicethatyoucarrywithyouasyoumovearoundthehouse,oryoucanscrewtheTouchScreenintothedock.• IfyouintendtousethedeviceONLYasatabletop,youcanuseeitheranEthernetoraWiFiconnection.• IfyouintendtousetheTouchScreenasaportabledeviceandremovetheTouchScreenfromitsdock,youmustuseaWiFiconnection.TousetheTouchScreenasaportabledevice,followtheinstructionsnext.TousetheTouchScreenasatabletopdevice,usingthetwo(2)screwsindicatedin“Requirements,”followtheinstructionsin“UsingtheTouchScreenasaTabletopDevice.”Using the Touch Screen as a Portabie DeviceUsethe7”PortableTouchScreendockasthedockingstationfortheTouchScreen(seeFigure6).NOTE:YoumustuseWiFiiftheTouchScreenwillbeusedasaportabledevice.1 Placethe7”PortableTouchScreendockonaatsurface.2 Power.Insertthepowercableintothepowerjackslotonthebackofthedevice(seeFigure7),andthenplugthepowercordintoawalloutlet.ThedevicecanbepoweredusingeitheranEthernetconnectororaPoEconnector.TouseEthernet,plugtheRJ-45connectorintothePoEconnectorandthenintotheEthernetjackonthebackoftheTouchScreendock(seeFigure6).Ethernet, PoE Power Jack Retaining ClipRubber GasketTouch Screen Touch Screen Dock3
screensaver.ToforcethedeviceintoSleepmode,pressandreleasethePowerbutton.Configure the Network SettingsYoumustcongurethenetworksettingsonthisTouchScreensoitcancommunicatewiththeotherdevicesintheControl4system.Tocongurethenetworksettingsforthisdevice:1 Ifusingawirelessnetwork,ensurethattheWiFiWAPisonthesamenetworkastheControl4Controller.2 GatherthefollowingwirelessnetworkinformationfromyourWAP:• SSID(ServiceSetIdentier).• WEP/WPA/WPA2securitykey,ifenabled.• IPAddressingRequirements:ThedefaultisDHCP(withdynamicaddresses).IfyouneedtouseastaticIPaddressinstead,youmustprovideanetworkIPaddressforthisdevice.3 OntheTouchScreen,tapMore>Settings>Network.Ifyouwanttousewireless,underWireless,selectEnable;otherwise,skiptoStep4.Followthesestepstocongureawirelesssetup:a Ifyoudon’tseethenetworkyouwant,selectOther.b AtNetworkName,selecttoaddtheSSIDornameofthewirelessnetworkwhenthekeyboardappears.c AtSecurity,selectNone,WEP,orWPA.d AtPassword,typethepasswordgiventoyoubythepersonwhosetupthecustomer’swirelessnetwork(Control4Dealer).e SelectConnect.NoticethattheIPsettingschange.4 TheIPaddressissettoDHCPbydefault.IfyouneedtosetastaticIPaddressinstead,completethefollowingsteps;otherwise,youarenishedwiththesesteps.a OntheNetworkpage,tapStatic (see Figure 8).dock.2 InserttheTouchScreenintoitsdock.3 TurntheTouchScreenanddockupsidedownandinsertthetwo(2)screws(included).4 ScrewthedocktotheTouchScreen(Figure7).Figure7.BottomViewwithDock5 WakeuptheTouchScreenbyeithertouchingthescreenorbypressinganybutton.6 (Optional)YoucanpermanentlymounttheTouchScreenanddocktoatabletopbyscrewingthebaseontoaatsurface(screwsnotincluded).SeeFigure7.Touch Screen ModesTheTouchScreenusesthefollowingmodes:• O:Thescreen,theACPowerindicator,andthebatteryindicatorarealldark(theTouchScreenhasnopower).Topowerupthedevice,ensurethatthebatteryischarged,orthedock’spowercordisconnectedtothedockandtheTouchScreenisproperlyseatedinthedock.• Suspend:Thescreenisdark.butthePowerindicatorislit.Towakeupthedevice,pressanybuttonortaptheTouchScreen.• Screensaver:Thescreensaverisrunning.Towakeupthedevice,tapthescreen.• Wake:ThescreendisplaysanythingotherthanaScrew Holes to attach Touch Screen to DockTouch ScreenDock Screw Holes for Permanent Mount4
Figure8.StaticIPAddressb Selecteachboxoneatatime,andtypetheaddress:IPAddress,SubnetMask,DefaultGateway,PreferredDNS,andAlternateDNS.c Whenthekeyboardappears,typetheaddress,andthentapDone.d TapOKtoreturntotheNetworkpage.YoucannowconnecttoaControl4DirectorrunningonaControl4deviceonthenetwork.Connect to Director from the Touch ScreenNOTES:(1)TheTouchScreen’scontrolsareauto-populatedbyaprojectontheControllertowhichitconnects.Ifthesubsystembuttonsarenotlit,andnodefaultroomdisplaysontheTouchScreen,youarenotconnectedtoaController.(2)EnsurethatthedevicesareaddedtoComposerandidentiedintheproject.See“CongureinComposer”fordetails.1 OntheHomepage,tapMore>Settings.2 TapDirector.3 IftheDirectorpagedoesnotdisplay,theDirectorviewhasprobablybeendisabled;youmustprovideapasswordtoenableit.• Ifyouneedthepassword,contactyourControl4Dealer.• Ifyouhavethepassword,tapConfig>Disable View,enterthepassword,andthentapDirectortodeselectit.TaptheDirectorbuttonagain,andyoushouldbeabletoviewtheDirectorpage.4 IntheDirectorlistofIPaddresses,taponyourController’sIPaddress.Thescreendisplaysyourcurrentconnections(Figure9).Figure9.ControllerAddress5 VerifythattheName,IPAddress,anddefaultlocation(room)displayontheTouchScreentoensurethatyouhaveallofthecorrectconnections.Configure in ComposerUsingComposerPro,addthedriverforthe7”PortableTouchScreentoyourproject.Ifthecorrectdriverdoesn’tappearforyoutoaddit,rightclickadriverintheMyDriverstab,andthenselectRestore Default Listtorefreshthelist.SeeComposer Pro Getting Started fordetails.1 StartComposerandconnecttoaDirector.2 AddtheTouchScreenobjecttotheproject:a IntheSystemDesignView(defaultview)projecttree(leftpane),highlighttheroomwheretheTouchScreenresides.b UnderMyDrivers,double-click <7” Portable Touch Screen>.3 Identifythedevice:a ClickConnections>Networktab.b IntheIPNetworkConnectionslist(centerpane),highlightTouch Screen - 7” Portable,andthenclickIdentify.c Whenprompted,gototheTouchScreenandpressthebottombuttonontherightside,asindicatedontheIdentifyscreeninComposer,toidentifythedevicetothenetwork.d WhentheaddressdisplaysinComposer,clickClose.Power OTopowerotheTouchScreen,pressandholdthePowerbuttonforatleastve(5)seconds,andthen5
waitafewmoresecondsforthedevicetoturno.Battery InstructionsShouldthebatteryeverneedtobereplaced,contactyourControl4representative.Battery ChargingForsafetyreasons,thebatteryisshippedonlypartiallycharged.Whenyouarereadyforuse,fullychargethebatteryinitsthedockforatleastfour(4)hours.IfyouremovetheTouchScreenfromthedockforlongperiodsoftime,theTouchScreenturnso.Inthiscase,inserttheTouchScreenintothedockagaintorechargetheTouchScreen.AredororangeLEDindicatesthatit’scharging.See“LEDIndicators”formoredetailsabouttheLEDs.Cleaning the Touch Screen and Dock1 Unplugthepowerjackfromthedock.2 Useasoft,dampclothtowipeothesurface.TroubleshootingIfyouexperienceoperationalproblemswiththeTouchScreen,readthefollowingsectionsforsystemtroubleshooting.Ifproblemspersist,pleasecontactyourControl4DealeroryourControl4representative.Battery Operation ProblemsIfbatteryislow...• Rechargethebatteryassoonaspossible.• DocktheTouchScreen(ifusingasaportable),andcontinuetousetheTouchScreeninitsdockuntilfullycharged.IftheTouchScreenturnsoautomatically...• Checkwhetherthebatterypowerisloworcompletelydrained.• CheckwhetherthesystemisinSuspendmode(see“TouchScreenModes”).• Tapthescreentocheckwhetherthedisplaywillactivate.• PlugintheDCpoweradapterorPoEcabletochargethebattery.IftheTouchScreendoesn’tturnonwhenit’snotconnectedtothedock...• ThebatterypowermaybetoolowtoruntheTouchScreen.Tryconnectingittothedocktorechargeit.Display ProblemsIfthescreenappearsblank...• Presstheany buttonortaptheTouchScreentowakeitup.System Operation ProblemsIftheTouchScreenisnotresponding...• AlwaystrytopowertheTouchScreenobeforeresettingtheTouchScreen.ResetthedevicebypressingtheReset/Restorepinholeonthetopofthescreen.Youmayneedtouseanunbentpapercliptopressthebutton.CAUTION!ThemicrophoneholeslooksimilartotheReset/Restorepinhole.Insertingapaperclipintothesepinholeswillpermanentlydamagethemicrophones.SeeFigure2.• Unplugthedockandplugitbackin.• IfpressingtheReset/Restorepinholebuttondoesnotsolvetheproblem,asalastresort,performafactoryrestore.PressandholdtheReset/Restorepinholebutton(seeFigure2-TopViewforthelocation)untilthePowerLEDbeginstoblinkrapidly.Thiswillresetallcongurations.Thefactoryrestoreprocessmaytake3-5minutestocomplete.IftheTouchScreenisdamaged...• ContacttheControl4DealerorResellerfromwhichyoupurchasedtheTouchScreen.Ifyouhavenetworkconnectionproblems...• Viewthesystem’swirelessstatusbycheckingtheWiFiindicatorontheTouchScreen’snavigator.• Makesureyou’veprovidedtherequirednetworkcongurationinformationdescribedin“ConguretheNetworkSettings.”• EnsurethatthesamekeyisbeingusedontheTouchScreenandattheWAP.• MakesuretheWAPisconnectedtothepropernetworkjackwhileitisfunctioninginthenetworkinfrastructuremode.6
WarningsWARNING!Toavoidbodilyharm,understandandfollowthesesafetyprecautionsbeforeoperatingthisTouchScreen:-Usingworn-outordamagedpowercordsmayresultinelectricshockorre.-AlwayscontactanauthorizedControl4serviceproviderforassistanceifanyrepairoradjustmentisrequired.Avertissement!Pouréviterdesdommagesphysiques,comprenezetsuivezcesmesuresdesécuritéavantd’actionnerl’écrantactileControl4®sansl:-Utilisantuséouendommagélescordonsdesecteurpeuventavoircommeconséquenceladéchargeélectriqueoulefeu.-EntrezencontactavectoujoursunfournisseurdesservicesControl4®autorisépourl’aidesin’importequelleréparationouajustementestexigée.Warnung!UmKörperverletzungzuvermeiden,verstehenSieundfolgenSiedieseSicherheitsanweisungenbevorSiedendrahtlosenControl4®TouchScreenbetreiben:-UnterVerwendungabgedroschenenoderbeschädigtkannNetzanschlusskabelElektroschockoderFeuerergeben.-TretenSieimmermiteinemautorisiertenControl4®DiensterbringerfürUnterstützunginVerbindung,wennirgendeineReparaturoderJustageangefordertwird.CAUTION!Toavoiddatalossorequipmentdamage,understandandfollowthesesafetyprecautionsbeforeoperatingthisTouchScreen:-DonotuseorplacetheTouchScreennearsourcesofheatorexposeittodirectsunlightforanextendedperiodoftime.Storeitinacoolanddryplace.-Donotusepensorsharpobjectstowriteonthescreen.Attention!Pouréviterlapertededonnéesoulesdommagesauxéquipments,comprenezetsuivezcesmesuresdesécuritéavantd’actionnerleControl4®7”;Écrantactiletenudanslamain:-Nelaissezpaslepaquetdebatterieentrerencontactavecd’autresobjetsenmétal.-N’utilisezpasouneplacezpasl’écrantactileprèsdessourcesdechaleurounel’exposezpasàlalumièredusoleildirectependantunepériodeprolongée.-Stockez-ledansunendroitfraisetsec.N’employezpaslesstylosoulesobjetspointuspourécriresurl’écran.Vorsicht!UmDatenverlustoderAusrüstungsschadenzuvermeiden,verstehenSieundvordemBetriebdesControl4®7”folgenSiedieseSicherheitsanweisungen;TouchScreen:-LassenSiedenBatteriesatzmitanderenMetallgegenständennichtinVerbindungtreten.-BenutzenSieodersetzenSiedenTouchScreennichtnaheQuellenderHitzeodersetzenSieihndirektemTageslichtwährendeinesausgedehntenZeitabschnittsaus.SpeichernSieesineinemkühlenundtrockenenPlatz.-BenutzenSienichtFedernoderscharfeGegenstände,umaufdenSchirmzuschreiben.IMPORTANT!DonotusepensorsharpobjectstonavigateormakeselectionsontheTouchScreen.Toselectanitemorscrollthroughalist,useyourngertip.Important!N’employezpaslesstylosoulesobjetspointuspourdirigeroupourfairedeschoixsurl’écran.Pourchoisirunarticleouunrouleauparuneliste,employezvotreboutdudoigt.Wichtig!BenutzenSienichtFedernoderscharfeGegenstände,umoderVorwählerenaufdemSchirmzubildenzusteuern.UmeinEinzelteilodereineRolledurcheineListe7
©2011 Control4. All rights reserved. Control4, the Control4 logo, the Control4 iQ logo and the Control4 certified logo are registered trademarks or trademarks of Control4 Corporation in the United States and/or other countries. All other names and brands may be claimed as the property of their respective owners.control4.com| ™vorzuwählen,benutzenSieIhreFingerspitze.IMPORTANT!ImproperuseorinstallationcancauseLOSS/DAMAGEOFPROPERTY.Important!L’utilisationoul’installationinexactepeutcauserLOSS/DAMAGEDEPROPRIÉTÉ.Wichtig!UnsachgemäßerGebrauchoderInstallationkönnenLOSS/DAMAGEDEREIGENSCHAFTverursachen.IMPORTANT!Usingthisproductinamannerotherthanoutlinedinthisdocumentvoidsyourwarranty.Further,Control4isNOTliableforanydamageincurredwiththemisuseofthisproduct.See“Warranty.”Important!Utilisantceproduitenquelquesorteautrequedécritdanscedocumentvidevotregarantie.Deplus,Control4n’estpasresponsabled’aucundommageencouruavecl’abusdeceproduit.Voyezque«Warranty.»Wichtig!DasVerwendendiesesProduktesingewissemSinneandersalsumrissenindiesemDokumenthebtIhreGarantieauf.WeiteristControl4NICHTfürirgendeineBeschädigungverantwortlich,diemitderFehlanwendungdiesesProduktesgenommenwird.SehenSie,daß“Warranty.”WARNING!Toreducetheriskofreorelectricalshock,donotexposethisapparatustorainormoisture.Avertissement!Pourréduirelerisquedufeuoudechocélectrique,n’exposezpascetappareilàlapluieouàl’humidité.Warnung!UmdieGefahrdesFeuersoderdeselektrischenSchlageszuverringern,setzenSiediesenApparatnichtRegenoderFeuchtigkeitaus.Regulatory/Safety InformationToreviewregulatoryinformationforyourparticularControl4products,seetheinformationlocatedontheControl4websiteat:http://www.control4.com/regulatory/.Patent InformationProtectedunderU.S.Patents7,335,845,7,106,261andlicensedunderU.S.Patents5,905,442and5,982,103WarrantyLimited2-yearWarranty.Refertohttp://www.control4.com/warranty.About this DocumentPartNumber:200-00238,RevA,11/01/2011,Draft78
Regulatory Compliance and Safety Information for Contol4 Model C4-TSMC7-EN-BL & C4-TSTTC7-EN-BL. Electrical Safety Advisory Important Safety Information Read all safety information before using this product. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. This equipment uses AC power which can be subjected to electrical surges, typically lightning transients which are very destructive to customer terminal equipment connected to AC power sources. The warranty for this equipment does not cover damage caused by electrical surge or lightning transients. To reduce the risk of this equipment becoming damaged it is suggested that the customer consider installing a surge arrestor. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Use the mains plug to disconnect the apparatus from the AC mains. The mains plug shall remain readily operable. 16. To completely disconnect unit power from the AC mains, disconnect the unit’s power cord from the mains socket. To reconnect power, plug the unit’s power cord into the mains socket following all safety instructions and guidelines. 17. Caution: Danger of explosion if lithium battery is incorrectly displaced. Replace only with the same or equivalent type. Battery should only be replaced by qualified personnel and is not intended as a user serviceable part. Do not expose batteries or battery pack to excessive heat such as prolonged sunlight, fire or other heat sources.
18. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. 19. This product can interfere with electrical equipment such as tape recorders, TV sets, radios, computers and microwave ovens if placed in close proximity. The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. See marking on bottom / back of product Warning!: To reduce the risk of electrical shock, do not expose this apparatus to rain or moisture AVERTISSEMENT! Pour réduire le risque de choc électrique, n'exposez pas cet appareil à la pluie ou à l'humidité. WARNUNG! Um das Risiko des elektrischen Schlages zu verringern, setzen Sie diesen Apparat nicht Regen oder Feuchtigkeit aus. Save these instructions Compliance of this equipment is confirmed by the following label that is placed on the equipment: USA & Canada Compliance FCC Part 15, Subpart B / ICES-003Unintentional Emissions Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules and Industry Canada ICES-003. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules and Industry Canada ICES-003. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. IMPORTANT! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IMPORTANT! Tous les changements ou modifications pas expressément approuvés par la partie responsable de la conformité ont pu vider l’autorité de l’utilisateur pour actionner cet équipement. Compliance of this equipment is confirmed by the following label that is placed on the equipment: FCC Part 15, Subpart C / RSS-210 Intentional Emissions Interference Statement Compliance of this equipment is confirmed by the following certification numbers that are placed on the equipment: Notice: The term “FCC ID:” and “IC” before the certification number signifies that FCC and Industry Canada technical specifications were met. FCC ID: R33C4TSMC7 IC: 7874A-C4TSMC7 This equipment must be installed by qualified professionals or contractors in accordance with FCC Part 15.203 & IC RSS-210, Antenna Requirements. Do not use any antenna other than the one provided with the unit. RF Radiation Exposure Statement This equipment complies with the FCC/IC radiation exposure limits set fourth for portable transmitting devices operation in an uncontrolled environment. End users must follow the specific operating instructions to satisfy RF exposure compliance.  The equipment should only be used or installed at locations where there is normally at least a 20cm separation between the antenna and all persons.  This transmitter must not be co-located or operation in conjunction with any other antenna or transmitter.  Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be providing with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (“SAR”) limits in portable exposure conditions. Canada’s REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng Additional Canadian information on RF exposure also can be found at the following web address: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html Informations concernant l'exposition aux fréquences radio (RF) La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l’appareil de sans fil de façon à minimiser les contacts humains lors du fonctionnement normal. Ce dispositif a été évalué et démontré conforme à la Specific Absorption Rate IC ("SAR") des limites dans des conditions d'exposition portatifs. Ce périphérique est homologué pour l'utilisation au Canada. Pour consulter l'entrée correspondant à l’appareil dans la liste d'équipement radio (REL - Radio Equipment List) d'Industry Canada rendez-vous sur: http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng Pour des informations supplémentaires concernant l'exposition aux RF au Canada rendez-vous sur : http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
European Compliance Conformity of the equipment with the guidelines below is attested by the application of the CE mark. CE Declaration of Conformity Manufacturer’s Name: CONTROL4 CORPORATION Manufacturer’s Address: 11734 S. ELECTION ROAD SUITE 200 SALT LAKE CITY UT 84020 USA EU Representative Name: CONTROL4 EMEA LIMITED EU Representative Address: UNIT3, GREEN PARK BUSINESS CENTRE SULTON-ON-THE FOREST YORK YO61 IET, UNITED KINGDOM Product Name(s): Touch Screen Interface Brand: Contol4 Model(s): C4-TSMC7-EN-BL & C4-TSTTC7-EN-BL Product Standard(s) to which Conformity of the Council Directive(s) is declared: EMC - 2004/108/EC “Electromagnetic Compatibility (EMC) Directive”: (Emissions) EN 55022:2006, (Immunity) EN 55024:1998, EN 301 489-1:2008, EN 301 489-17:2009, EN 61000-3-2:2004 & EN 61000-3-3:2002 Safety – 206/95/EC “Low Voltage Directive (LVD)”: EN 60950-1:2006 (2nd Edition) . Telecom & Radio - 1999/5/EC Radio equipment and Telecommunications Terminal Equipment (R&TTE) Directive: EN 300 328 V1.7.1 (2006-10) RoHS - 2002/95/EC Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment (EEE) & WEEE - 2002/96/EC Waste of Electrical and Electronic Equipment (EEE). We, the undersigned, hereby declare that the equipment specified above conforms to the above directives and standards. Date of Issue: December 31, 2011 Legal Representative Signature Roger Midgley Sr. Regulatory Compliance Engineer
National Restrictions This product may be used in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Ce produit peut être utilisé dans tous les pays de l'UE (et dans tous les pays ayant transposés la directive 1999/5/CE) sans aucune limitation, excepté pour les pays mentionnés ci-dessous: Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le direttive EU 1999/5/EC) senza nessuna limitazione, eccetto per i paesii menzionati di seguito: Das Produkt kann in allen EU Staaten ohne Einschränkungen eingesetzt werden (sowie in anderen Staaten die der EU Direktive 1999/5/CE folgen) mit Außnahme der folgenden aufgeführten Staaten: France In case the product is used outdoors, the output power is restricted in some parts of the band. See Table 1 below or check http://www.arcep.fr/ for more details. Dans la cas d'une utilisation en extérieur, la puissance de sortie est limitée pour certaines parties de la bande. Voir la table ci-dessous ou visitez http://www.arcep.fr/ pour de plus amples details Table 1 Applicable Power Levels in France Location Frequency Range (MHz) Power (EIRP) Indoor (No restrictions) 2400-2483.5 100 mW (20 dBm) Outdoor 2400-2454 2454-2483.5 100 mW (20 dBm) 10 mW (10 dBm) Recycling Control4 understands that a commitment to the environment is essential for a health life and sustainable growth for future generations. We are committed to supporting the environmental standards, laws, and directives that have been put in place by various communities and countries that deal with concerns for the environment. This commitment is represented by combining technological innovation with sound environmental business decisions. WEEE Compliance Control4 is committed to meeting all requirements of the Waste Electrical and Electronic Equipment (WEEE) directive (2002/96/EC). The WEEE directive requires the manufacturers of electrical and electronic equipment who sell in EU countries: (1) label their equipment to notify customers that it needs to be recycled, and (2) provide a way for their products to be appropriately disposed of or recycled at the end of their product lifespan. For collection or recycling of Control4 products, please contact your local Control4 representative or dealer.
Australia / New Zealand Compliance Compliance of this equipment is confirmed by the following label that is placed on the equipment: South Korea Compliance 해당무선설비기기는 운용 중 전파혼신가능성이 있음 English Translation: This radio device has the possibility of radio interference during operation. 2.4GHz RF Warning Message: 해당무선설비기기는 운용 중 전파혼신가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 English Translation: This radio device is not allowed to be used for human safety since it has the possibility of radio interference during operation. EMC (Class B) Warning Message: 이 기기는 가정용(B급) 전자파 적합기기 로서 주로 가정에서 사용하는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다. English Translation: The equipment is for home use (Class B), and has acquired electromagnetic conformity registration. So it can be used not only in residential area but also other areas. About this Document Part Number 200-00293 Rev A, 12/9/2011
Warranty/Regulatory CardControl4® Corporation (“Control4”) warrants that at the time of first-consumer sale, this product will be free from defects in material and manufacture. Control4 further warrants that for a period of 2 years (24 months) after initial consumer sale, the product will function in accordance with its specification, provided that it is installed and maintained under normal and proper use. This warranty extends only to products purchased directly from Control4 or an Authorized Control4 Reseller. If the product proves to be defective in material or workmanship during the warranty period, it may be returned to the place of purchase and Control4 will, at its sole option, repair or replace the product with a like product. This warranty provides the consumer purchaser with specific legal rights, which may vary per state or country. For complete warranty information, including details on consumer legal rights as well as warranty exclusions, visit www.control4.com/warranty.Except as specifically provided above and to the maximum extent allowed by law, Control4 disclaims all warranties and conditions whether express, implied, or statutory as to any matter whatsoever including, without limitation, title, non infringement, condition, merchantability or fitness for any particular or intended purpose.Except as expressly provided above and to the maximum extent allowed by law, Control4 shall not be liable for any special, indirect or consequential damages (including without limitaton, loss of profit, loss of business, loss of information, financial loss, personal injury, loss of privacy or negligence) which may be caused by or related to , directly or indirectly, the use of a product or service, the inability to use a product or service, inadequacy of a product or service for any purpose or use thereof or by any defect or deficiency therein even if Control4 or an authorized Control4 dealer has been advised of the possibility of such damages or losses.Warranty Information
GPL Source CodeCopyright © 2011 Control4. All rights reserved. Control4, the Control4 logo, the Control4 iQ logo and the Control4 certified logo are registered trademarks or trademarks of Control4 Corporation in the United States and/or other countries. All other names and brands may be claimed as the property of their respective owners. Pricing and specifications are subject to change without notice. Part Number: 200-00230, Rev. A 5/25/2011To review regulatory information for your particular Control4 products, see the information located on the Control4 website at: http://www.control4.com/regulatory.Regulatory InformationThe GPL source code in this product is available as a free download from http://www.control4/gpl/.Product DocumentationTo view or print product Installation, Setup, or User guides in PDF format, see the Documentation page on the Control4 Dealer website at: http://www.control4.com/dealer/products/documentation/ (login required).

Navigation menu