Control4 C4TSX7EG 7" TABLE TOP TOUCH SCREEN, 7" IN-WALL TOUCH SCREEN User Manual C4 TST7 EG B U
Control4 7" TABLE TOP TOUCH SCREEN, 7" IN-WALL TOUCH SCREEN C4 TST7 EG B U
Control4 >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1050699 |
| Application ID | saFx06oyc/kQuAQ/WZowUA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 33.84kB (422990 bits) |
| Date Submitted | 2008-12-30 00:00:00 |
| Date Available | 2008-12-30 00:00:00 |
| Creation Date | 2008-12-29 09:54:13 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2008-12-30 17:40:18 |
| Document Title | C4-TST7-EG-B .......U.pdf |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | rachel.tsai |
Warning! To reduce the risk of fire or electrical shock, do not expose
this apparatus to rain or moisture.
Avertissement! Pour réduire le risque du feu ou de choc électrique,
n'exposez pas cet appareil à la pluie ou à l'humidité.
Warnung! Um die Gefahr des Feuers oder des elektrischen Schlages
zu verringern, setzen Sie diesen Apparat nicht Regen oder
Feuchtigkeit aus.
7” TABLE TOP
TOUCH SCREEN
Installation
Guide
Model
• C4-TST7-EG-B (7” Tabletop Touch Screen, WiFi and Ethernet)
What’s in the Box
Carefully unpack the contents from the box and make sure the following
items are included in the box. If any item is missing or damaged, please
contact your Control4-authorized reseller immediately.
• 7” Tabletop Touch Screen (C4-TST7-EG-B)
• AC power cord and power adapter
• 7” Tabletop Touch Screen Installation Guide (this document)
Accessories
• Control4 Power Over Ethernet Injector (AC-POE1-B)
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Install in accordance with the manufacturer’s instructions.
Install in accordance with all national and local electrical codes.
This product is also designed for IT power systems with phase-to-phase
voltage 120V or 240V.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Only use attachments/accessories specified by the manufacturer.
If applicable, unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
Warning! The touch screen must be protected by an external circuit
breaker or a fuse rated at 6A maximum when used in Europe.
Avertissement! To reduce the risk of fire or electrical shock, do not
expose this apparatus to rain or moisture.
Warnung! Die Berührungseingabe muß durch einen externen Circuit
breaker oder eine Sicherung geschützt werden, die am Maximum 6A
veranschlagen wird, wenn sie in Europa verwendet wird.
Warning! To avoid bodily harm, always contact a Control4authorized reseller for assistance if any repair or adjustment is
required.
Avertissement! Pour éviter des dommages physiques, contactez
toujours un revendeur de Control4-authorized pour l'aide si n'importe
quelle réparation ou ajustement est exigée.
Warnung! Um körperlichen Schaden zu vermeiden, treten Sie immer
mit einem Control4-authorized Reseller für Unterstützung in
Verbindung wenn irgendeine Reparatur oder Justage angefordert
wird.
Warning! Do not place unit near sources of heat or expose to direct
sunlight for an extended period of time.
Avertissement! Ne placez pas l'unité près des sources de chaleur
ou exposition pour diriger la lumière du soleil pendant une période
prolongée.
Warnung! Setzen Sie Maßeinheit nicht nahe Quellen der Hitze oder
des Exposés, um Tageslicht während eines ausgedehnten
Zeitabschnitts zu verweisen.
Warning! Do not stare at the light or proximity sensor. Looking at
these sensors for extended periods of time may cause damage to the
eyes.
Avertissement! Ne regardez pas fixement la lumière ou le capteur
de proximité. Regarder ces sondes pendant des périodes prolongées
peut endommager les yeux.
Warnung! Starren Sie nicht entlang des Lichtes oder des
Annäherungssensors an. Das Betrachten dieser Sensoren nach
ausgedehnten Zeitabschnitten kann Beschädigung der Augen
verursachen.
Important! Do not use pens or sharp objects to navigate or make
selections on the screen. To select an item or scroll through a list, use
your fingertip.
Important! N'employez pas les stylos ou les objets pointus pour
diriger ou pour faire des choix sur l'écran. Pour choisir un article ou un
rouleau par une liste, employez votre bout du doigt.
Wichtig! Benutzen Sie nicht Federn oder scharfe Gegenstände, um
oder Vorwähleren auf dem Schirm zu bilden zu steuern. Um ein
Einzelteil oder eine Rolle durch eine Liste vorzuwählen, benutzen Sie
Ihre Fingerspitze.
Important! Improper use or installation can cause LOSS/DAMAGE
OF PROPERTY.
Important! L'utilisation ou l'installation inexacte peut causer LOSS/
DAMAGE DE PROPRIÉTÉ.
Wichtig! Unsachgemäßer Gebrauch oder Installation können LOSS/
DAMAGE DER EIGENSCHAFT verursachen.
• Access to a power outlet.
• One Ethernet CAT 5 cable to run from the Ethernet gateway/router/switch to
wireless access point (WAP).
Placement, Network Connection, and Power
Options
The 7” TabletopTouch Screen is equipped with the touch screen, four
programmable shortcut buttons, a light sensor, and a proximity sensor.
Place the touch screen on a table or level surface in a convenient location.
This device can use either an Ethernet or WiFi network connection. An
Ethernet installation can be powered by Power over Ethernet (PoE) or an AC
connection. A WiFi installation must use an AC power connection.
NOTE: Do not attempt to use PoE and AC at the same time.
Option 1: Ethernet Connection with PoE
PoE injects electrical current into the Ethernet cable using a PoE injector in
order to provide the touch screen with both power and a network connection.
To set up your PoE and Ethernet connection, see Figure 1. The touch screen
works with the Control4 Power Over Ethernet Injector (model # AC-POE1-B).
FIGURE 1. Ethernet - Requires connection to PoE injector.
router/switch to the PoE injector/switch and (2) one that will run from the PoE
injector/switch to the 7” touch screen.
Place the PoE Injector near your gateway/router/switch. Pull the Ethernet
cable from that location to the location of where you want to place your touch
screen.
Option 2: Ethernet Connection with AC
No PoE injector is needed for Ethernet with AC power; the Ethernet is
connected directly to the switch. This power connection requires both neutral
and hot connections. See Figure 2.
FIGURE 2. Ethernet - Requires connection to Ethernet and AC power
1. Display: 7” viewing area, Touch-Screen with 800 x 480 resolution TFT
2. Shortcut buttons (4): For custom programming to initiate an action or
sequence of actions
3. Proximity sensor: Laser sensor that detects movement within two feet of
the touch screen and turns off screen saver
4. Reset button: Button located under the bezel to reset touch screen.
5. Light sensor: Detects light levels in room for programming purposes
6. Front Dimensions (H x W x D): 6.95” x 8.37” x 4”
Back View
Top of Table
When using WiFi, the touch screen gets its power from an AC power source
nearby. This power connection requires both neutral and hot connections.
See Figure 3.
Place the touch screen above a power source, such as at an outlet. Ensure
you have WiFi in the home.
• For an Ethernet installation that uses AC Power:
• Ethernet network installed and available that includes a gateway/router/switch
Option 3: WiFi Connection with AC
compatible PoE Ethernet switch.
Front View
To install the touch screen, you need the following:
• Control4 controller, fully installed and configured.
• (Optional) An amplifier or amplified speakers.
• (Optional) Any RCA cables required to connect the touch screen and the
• Two Ethernet CAT 5 cables: (1) one that will run from the Ethernet gateway/
Front and Rear Panel Description
Top of Table
Requirements
amplifier or amplified speakers.
Top of Table
• Access to a power outlet.
Important! Using this product in a manner other than outlined in this
document voids your warranty. Further, Control4 is NOT liable for any
damage incurred with the misuse of this product. See “Limited 2 Year
Warranty.”
Important! Utilisant ce produit en quelque sorte autre que décrit
dans ce document vide votre garantie. De plus, Control4 n'est pas
responsable d'aucun dommage encouru avec l'abus de ce produit.
Voyez que « Limited 2 Year Warranty. »
Wichtig! Das Verwenden dieses Produktes in gewissem Sinne
anders als umrissen in diesem Dokument hebt Ihre Garantie auf.
Weiter ist Control4 NICHT für irgendeine Beschädigung
verantwortlich, die mit der Fehlanwendung dieses Produktes
genommen wird. Sehen Sie, daß “Limited 2 Year Warranty”.
• For an Ethernet installation that uses POE Power:
• Ethernet network installed and available that includes a gateway/router/switch
• Access to the Control4 PoE Injector (model #AC-POE1-B) or an 802.3af
FIGURE 3. WiFi - Requires AC power and WAP.
the 7” touch screen.
• For a WiFi installation:
• Wireless network (WiFi 802.11b/g) installed and available that includes a
1. RCA audio line-level output: (Optional) Audio ports available for an amplifier or amplified speakers for audio output using a standard RCA stereo
cable
2. RG-45 port: Ethernet port available for either a standard Ethernet source
that provides network communication only OR a PoE source
(IEEE802.3af PoE) that provides power to the device and network communication
3. AC power port: 9-12 VDC jack
4. AC power cord recess
5. Network Support: Ethernet or WiFi IEEE 802.11 b/g
the SSID. A virtual keypad displays for you to enter the
information.
Installation
d. Select the WEP or WPA button, then press in the text box provided
to display a virtual keypad. Use the virtual keypad to enter the
WEP key in hex format or to enter the WPA text.
Establish power and network connections as needed for this
installation.
e. Choose the WEP key length from the drop-down list.
For Power Over Ethernet (POE):
Install a PoE injector or switch. To do this:
a. Connect the Control4 PoE Injector to a power
source, such as an AC outlet, using the power cord
(provided with the unit). The light comes on when
power is applied.
b. Connect one of the RJ-45 LAN ports on the
gateway/router/switch to the PoE Injector’s LAN port using the
RJ-45 ethernet cable. The STAND BY light on the PoE Injector
lights up.
c. Connect the PoE Injector’s PWR LAN-OUT port to the touch
screen using the RJ-45 ethernet cable in the wall. The Power
mode LED will change from orange to green.
For AC Power:
Connect to a power supply. To do this:
a. Connect the AC power cord to the power adapter provided.
b. Plug the power cord’s L-shaped connector into the back of the
touch screen, then feed the power cord through the recess
provided on the back of the touch screen.
c. Plug the power cord’s plug into a power outlet
For Network Communication:
POE: The Ethernet network connection is provided by the POE injector. No
additional wiring is needed.
Standard Ethernet Connection: Connect the 7” Touch Screen to one of the
RJ-45 LAN ports on the gateway/router using the RJ-45 ethernet cable.
WiFi Connection: The internal WiFi antenna will communicate with the local
area network’s wireless access point (WAP). If the local area network has a
WAP set up, no additional wiring is needed.
(Optional) If you intend to send audio to an amplifier or amplified
speakers, route a stereo RCA cable from your 7" Tabletop Touch
Screen audio out ports (RCA red and white connectors) to your
amplifier or amplified speakers.
Calibrate your 7” Touch Screen the first time you use it or any time the
on-screen instruction prompts you to. To do this, use your fingertip to
touch the screen firmly and accurately at the point indicated by the
crosshairs. Repeat for each of the four subsequent points indicated by
the crosshairs.
f.
Press OK.
To protect the display screen: (1) Use one of the screen-saver options
available from the Info > Config > Screen Saver page; (2) Use a plastic
(cling-on) screen protector (available where hand-held electronic
devices are sold) to help guard against scratches.
Now that your touch screen is physically installed and appearing on the
home network, you can add it to the Control4 System using the
Composer software (available for your PC). See Composer Help for
information on how to add the touch screen and other devices to the
Control4 System.
Limited 2 Year Warranty
Control4 Corporation ("Control4") warrants that at the time of first-consumer
sale, this product will be free from defects in material and manufacture.
Control4 further warrants that for a period of 2 years (24 months) after initial
consumer sale, the product will function in accordance with its specification,
provided that it is installed and maintained under normal and proper use.
This warranty extends only to products purchased directly from Control4 or
an Authorized Control4 Reseller. If the product proves to be defective in
material or workmanship during the warranty period, it may be returned to
the place of purchase and Control4 will, at its sole option, repair or replace
the product with a like product. This warranty provides the consumer
purchaser with specific legal rights, which may vary per state or country. For
complete warranty information, including details on consumer legal rights as
well as warranty exclusions, visit www.control4.com/warranty.
b. Press Add.
c. Press in the
Network
(SSID) text
box to enter
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Statement
7KLV7UDQVPLWWHUPXVWQRWEHFRORFDWHGRURSHUDWLQJLQFRQMXQFWLRQVZLWK
any other antenna or transmitter.
7KLVHTXLSPHQWFRPSOLHVZLWK)&&5)UDGLDWLRQH[SRVXUHOLPLWVVHWIRUWK
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 centimeters between the radiator
and your body.
FCC Caution
Important! Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate the equipment.
Important! Tous les changements ou modifications pas
expressément approuvés par la partie responsable de la conformité
ont pu vider l'user' ; autorité de s pour actionner l'équipement.
Wichtig! Alle mögliche änderungen oder änderungen nicht
ausdrücklich genehmigt von der Partei, die für Befolgung
verantwortlich ist, konnten die Berechtigung des Benutzers aufheben,
um die Ausrüstung laufen zu lassen.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Industry Canada Statement
This Class B digital apparatus complies with Canada ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Edison Testing Laboratory (ETL)
Regulatory Compliance
This product complies with standards described in this section.
This product has been tested to the requirements of, and shown
to be in compliance with, the following requisite standards: US
and Canada 60950. Safety of Information Technology
Equipment.
European Compliance
CE Declaration of Conformity
European Contact Information
United States Contact Information
Control4 UK Limited
Unit 3, Green Park Business Centre
Sutton-on-the-Forest, York
YO61 IET, United Kingdom
+44 (0) 134781 2300
c4@control4-UK.com
Control4 Corporation
11734 S. Election Road, Suite 200
Salt Lake City, UT 84020-6432, USA
Tel (801) 523-3100
Product: 7” Tabletop Touch Screen
Model: C4-TST7-EG-B
The undersigned hereby declares, on behalf of Control4 Corporation, that
the above-referenced product, to which this declaration relates, is in
conformity with the provisions of:
Council Directive 89/336/EEC (May 3, 1989) on Electromagnetic Compatibility
Council Directive 1999/5/EC (Mar 9, 1999) on Radio & Telecommunication
Terminal Equipment (R&TTE)
Council Directive 73/23/EEC (Feb. 19, 1973) on Low Voltage Equipment
Safety
Council Directive 93/68/EEC (Jul. 22, 1993) Amending Directives 89/336/EEC
and 73/23/EEC
and has been tested to the requirements of, and shown to be in compliance
with, the following requisite standards:
EN 301 489-1 V1.4.1 - Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services- Part 1 Common technical requirements.
EN 301 489-17 V1.2.1 - Electromagnetic compatibility and Radio spectrum
Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment.
EN 300 328-V1.4.1 (2003-04) - Wide band transmission systems; data trans-
mission equipment operating in the 2.4GHz ISM band. Harmonised EN covering essential requirements under Article 3(2) of the R & TTE Directive.
EN 60950-1: 2001. Safety of Information Technology Equipment
IEC60950-1: First Edition 2001 Including CB Scheme Group & National Differences as detailed in CB Bulletin 107A May 2004.
The Technical Construction File required by these Directives is maintained at
the corporate headquarters of Control4, Salt Lake City, Utah, U.S.A.
Signed,
Brett Molen—Vice President, Engineering, _________ 2008
Norsk: Apparatet må tilkoples jordet stikkontakt.
Suomi: Laite on liitettävä suojamaadoituskoskettimilla varustettuun
pistorasiaan.
Svensk: Apparaten skall anslutas till jordat uttag.
Dansk: Vigtigt! Lederen med grøn/gul isolation må kun tilsluttes en klemme
mærket
eller
Australian/New Zealand Compliance
This product has been tested to the requirements of, and shown
to be in compliance with, the following requisite standards:
AS/NZS 4368: 2003
(For WiFi only) Connect to a wireless access point:
a. Select Info >
Network >
Wireless.
The Wireless
configuration
screen
appears.
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
Recycling
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
FCC RF Radiation Exposure Statement:
1.This transmitter must not
be co-located or opeating in conjunction with any other antenna or transmitter.
2.This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
For information on recycling, please go to www.control4.com/
recycling
About this Document
United States Patents Pending. Copyright © 2008 Control4 Corporation.
Control4 and the Control4 logo are registered trademarks of Control4
Corporation. All trademarks are properties of their respective owners.
Part Number: 200-00092 Rev A (Draft 2)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2008:12:29 09:54:13Z Modify Date : 2008:12:30 17:40:18+08:00 Page Count : 2 Creation Date : 2008:12:29 09:54:13Z Mod Date : 2008:12:30 17:40:18+08:00 Producer : Acrobat Distiller 5.0 (Windows) Author : rachel.tsai Metadata Date : 2008:12:30 17:40:18+08:00 Creator : rachel.tsai Title : C4-TST7-EG-B .......U.pdf Has XFA : NoEXIF Metadata provided by EXIF.tools