Control4 TSX38C21 WiFi Mini/Touch Screen User Manual MiniTouchScreen IG 200 00010 Rev D

Control4 WiFi Mini/Touch Screen MiniTouchScreen IG 200 00010 Rev D

UserManual.wiki >

TSX38C21 User Manual

Exhibit 8

Mini Touch Screen Installation GuideSupported ModelsWhat’s in the BoxCarefully unpack the contents from the box and make sure the following items are included in the box. If any item is missing or damaged, please contact your Control4-authorized reseller immediately.•Control4 Mini Touch Screen •Mini Touch Screen Installation Guide (this document)•Two sheet metal screws (1/2 inch) for attachment to a plastic wall box. (Metal wall boxes require machine screws. They are included with the the metal wall box kit.)Graphical Symbols in this GuideThe following symbols and their descriptions draw your attention to important safe practices and additional information that can help you avoid injury, death, or loss of material or time.WARNING! This indicates a potentially hazardous situation that, if not avoided, may result in death or injury. DO NOT IGNORE A WARNING!IMPORTANT! This indicates information that will help you avoid damage to your equipment, loss of materials, or loss of time. PAY ATTENTION TO THESE IMPORTANT STATEMENTS!NOTE: This indicates a note on related information about the current topic. TIP: This indicates a tip that might save you time or effort.Important Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth. 7. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9. Protect the power cords, if applicable, from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.10. Only use attachments/accessories specified by the manufacturer.11. If applicable, unplug this apparatus during lightning storms or when unused for long periods of time.12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the appara-tus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.WARNING! To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.WARNING! To avoid bodily harm, always contact a Control4-authorized reseller for assistance if any repair or adjustment is required.WARNING! Do not place unit near sources of heat or expose to direct sunlight for an extended period of time. IMPORTANT! Do not use pens or sharp objects to navigate or make selections on the screen. To select an item or scroll through a list, use either your fingertip or the Select Dial.IMPORTANT! Improper use or installation can cause LOSS/DAMAGE OF PROPERTY.Placement and Model OptionsThe Control4 Mini Touch Screen offers complete system control in an elegant and compact design. The Mini Touch Screen is equipped with the touch screen, an intuitive Select Dial, and a unique programmable shortcut button. PlacementPlace the Mini Touch Screen in a convenient location at eye level, typically near the entrace of the room, approximately 57 to 61 inches from the floor. The model used also influences placement. The Mini Touch Screen comes in two models: Ethernet and WiFi. These options are described in the next two sections.Option 1: Ethernet ModelThe Ethernet Mini Touch Screen requires a Power over Ethernet (PoE) device that injects electrical current into the Ethernet cable in order to provide the Ethernet Mini Touch Screen with both power and a network connection. See Figure 1. The Ethernet Mini Touch Screen works with the Control4 Power Over Ethernet Injector (model # AC-POE1-B) or a third-party PoE injector or switch. If you plan to use a third-party PoE solution or a non-standard connection cable, refer to “Power Interface Requirements” (back page) for the specifications. Ethernet Placement: Place the PoE Injector near your gateway/router/switch. Pull the Ethernet cable from that location to the location of where you want to place your Mini Touch Screen.FIGURE 1. Ethernet Model - Requires Ethernet Wiring to Mini Touch Screen.Option 2: WiFi Model The WiFi Mini Touch Screen differs from the Ethernet model in two ways:•It uses a WiFi antenna that communicates via WiFi to a Wireless Access Point.•It gets its power from an AC power source close to the Mini Touch Screen. This power connection requires both neutral and hot connec-tions. See Figure 2.WiFi Placement: Place the WiFi Model above a power source, such as at an outlet. Ensure you have WiFi in the home.FIGURE 2. WiFi Model - Requires AC power to Mini Touch Screen.Wall Box Kit OptionsThere are four wall box options to install the Mini Touch Screen. Metal and plastic wall boxes are available for new or retrofit versions. The following diagrams show the available wall mounting kits.FIGURE 3. Mini Touch Screen/LCD Keypad Wall Box Kits - New Construction FIGURE 4. Mini Touch Screen/LCD Keypad Wall Box Kit - Retrofit (includes wall box template) RequirementsTo install the Mini Touch Screen, you need the following:•Home Theater Controller or Media Controller fully installed and config-ured with a Control4 system.•(Optional) An amplifier or amplified speakers.•(Optional) Any RCA cables required to connect the Mini Touch Screen and the amplifier or amplified speakers.•Ethernet model:• Ethernet network installed and available that includes a gateway/router/switch.• Control4 PoE Injector (model #AC-POE1-B) or another third-party PoE injector or switch.• Two Ethernet Category 5 cables to support your PoE injector: (1) one that will run from the Ethernet gateway/router/switch to the PoE injector/switch and (2) one that will run from the PoE injector/switch to the Ethernet Mini Touch Screen wall box.•WiFi model: • Wireless network (WiFi 802.11b/g) installed and available that includes a wireless access point (WAP).• Access to in-wall AC power. (A neutral connection is required).• 14 AWG electrical wire long enough to pull between Mini Touch Screen and power source.•Control4 Mini Touch Screen/LCD Keypad custom wall box kit. See “Wall Box Kit Options.”Front and Rear Panel DescriptionFront View 1. Microphone: (Future) Microphone for communication features. 2. Speaker: (Future) Speaker for inter-com.3. Select Dial: Use during setup to iden-tify the device to the Control4 system. Once setup is complete, for scrolling through displays.4. Shortcut Button: For custom pro-gramming to initiate an action or sequence of actions.5. Display: 3.8" TFT (3.5” viewing area), Touch-Screen with 320x240 Resolution, QVGA.Back View: Ethernet Models1. RCA audio line-level output: (Optional) Connect these ports to an amplifier or amplified speakers for audio output using a standard RCA stereo cable.2. RJ-45 port: For connection to the Ether-net PoE source to power the device and provide network communication.3. Dimension: Front - 6 1/2” (W) x 4 3/8” (H) x 1/5-2/5” (D) In-Wall - 5 7/8” (W) x 3 5/8” (H) x 1 1/2” (D) 4. Power Supply: PoE (Power Over Ether-net).Back View: Wireless Models1. RCA line-level audio output: (Optional) Connect these ports to an amplifier or amplified speakers for audio output using a standard RCA stereo cable.2. AC Wires: Connect the black (hot) and white (neutral) wires from the back of the Mini Touch Screen to the hot and neutral wires from the wall.3. Dimension: Front - 6 1/2” (W) x 4 3/8” (H) x 1/5-2/5” (D) In-Wall: 5 7/8” (W) x 3 5/8” (H) x 1 1/2” (D) 4. Power Supply: AC Power5. Network Support: WiFi IEEE 802.11b/gEthernet Models:TSE-3.8C2-W (White)TSE-3.8C2-B (Black)TSE-3.8C2-A (Almond)WiFi Models:TSG-3.8C2-W (White)TSG-3.8C2-B (Black)TSG-3.8C2-A (Almond)Plastic model # AC-NWB3.8-G Metal model # AC-NWB3.8-MPlastic model # AC-RWB3.8-G Metal model # AC-RWB3.8-M