Controlled Entry Distributors CRW26EM RFID READER User Manual

Controlled Entry Distributors, Inc. RFID READER

USERS MANUAL

SEBURY
2 Specifications 1. Characteristics Frequency：125 kHz Modulation：Bi-phase DC Supply Voltage: Low voltage input 12 ±10% Vdc unregulated Current Consumption: 100mA @ quiescent maximum Door Relay: 5Amp 12Vdc Alarm output load: 150mA pull current 2. Wiring Connections Electric lock External bell External Push Switch Magnetic Contacts Alarm 3. Programming memory: Non volatile Eeprom memory Operating Temperature: 0°C to 60°C (32°F to 140°F) Keypad Housing: Metal Dimensions: 121mm x 46mm x 24mm Weight: 500g NOTE PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL Intramural Interface Circuit 1. Alarm output interface (See Figure 1) 2. Electric lock interface (See Figure 2)
3 Mounting 1. Attach the rear plate to a single or double gang electrical box or secure to the wall firmly with at least three flat head screws. 2. When wiring has been completed, attach the front cover to the rear plate. Figure 1 Figure 2
4 Size Model & characteristics FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The antenna provided is a unique antenna. By installation of unauthorized antenna to this equipment. Such unauthorized installation could void the user's authority to opearte the equipment. NOTE: The manufacturer is not responsible for and radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Navigation menu