Convergence Systems CS3151AAA RTLS Asset & Personnel RFID Tags User Manual CSL RTLS 1 3

Convergence Systems Limited RTLS Asset & Personnel RFID Tags CSL RTLS 1 3

User Manual

1 User Manual of CSL RTLS System CS3151 Tag CS5111LP Reader CS5113LP Reader with Ethernet Bridge
2Table of Content User Manual of CSL RTLS System...............................................................................1 Introduction..................................................................................................................3 1 System Component Description..........................................................................4 1.1 CS3151.......................................................................................................4 1.1.1 Product Description .......................................................................4 1.1.2 Installation Procedure ....................................................................4 1.1.3 Product Specification.....................................................................5 1.1.4 Antenna Properties.........................................................................5 1.2 CS5111LP ..................................................................................................7 1.2.1 Product Description .......................................................................7 1.2.2 Installation Procedure ....................................................................7 1.2.3 Product Specifications ...................................................................7 1.3 CS5113LP..................................................................................................8 1.3.1 Product Description .......................................................................8 1.3.2 Installation procedure.....................................................................8 1.3.3 Product Specifications ...................................................................9
3Introduction The CSL RTLS solution is based on the application of time of arrival technology. In the RTLS, an anchor is the device installed in a known position inside a zone, normally, at the corners of the zone. The moving tag inside the zone can measure the range to each anchor so as to obtain its absolute position inside the zone. A ZoneAnchor AnchorAnchorAnchorTag In a minimum system, 4 anchors – 3 normal anchors CS5111LP and 1 master anchor CS5113LP- are installed in a zone. However, the more the anchors are installed, the higher the accuracy of the tag position to be obtained. The accuracy of positioning is +/-1 meter.
4 1 System Component Description 1.1 CS3151 1.1.1 Product Description CS3151 is a battery-operated active RFID tag. Three AAA size primary batteries ( either alkaline or lithium/Iron Disulfide )or Ni-MH rechargeable batteries can be installed for normal function. CS3151 are designed so that they can be attached to the tracking assets or simply hanging on the moving objects, depending on the applications. There are four holes on the corners of the tag housing that can allow the tag to be bolted firmly on the asset. Both of the facets have light indicators so either face can be attached to the asset. 1.1.2 Installation Procedure When batteries are initially installed, CS3151 tags will be in listening mode. In this mode, the CS3151 tags will listen to the commands from CS5113LP master anchor for configuration. Once configuration is completed, CS3151 is in the operating mode and ready for RTLS tracking.
5 1.1.3 Product Specification 1.1.4 Antenna Properties CS3151 employs embedded miniaturized Omni-directional chip antenna for effective RF transmission and reception. The antenna property is as below : Electrical Items Specifications Model 3030A5887-01 Type of antenna SMD chip type Frequency range 2400MHz – 2500MHz Nominal impedance 50 ohm Polarization Linear V.S.W.R 1.5 typically, mounting on CS3151
6Gain 2dBi typically, mounting on CS3151 Mechanical Items Specifications Dimension in millimeter 12.8(L) x 3.9(W) x 1.1(H) Weight 0.1gram
7 1.2 CS5111LP 1.2.1 Product Description CS5111LP is the RTLS anchor( or reader). It integrates the high gain 2.4GHz ISM band antenna and the electronics PCB into one housing for robustness and easy installation. CS5111LP is designed to be mounted at the back panel. 1.2.2 Installation Procedure CS5111LP can be fed with DC voltage ranges from 12V to 38Vdc. The dc plug is 2.5mm locked type. CS5111LP is fully programmed and ready for normal operation once power is on. No extra configuration procedure is required. 1.2.3 Product Specifications
8 1.3 CS5113LP 1.3.1 Product Description CS5113LP is the RTLS master anchor( or reader). It integrates the high gain 2.4GHz ISM band antenna and the electronics PCB into one housing for robustness and easy installation. CS5113LP has Ethernet connectivity function to communicate with the server application. CS5113LP is also a POE PD that can allow it to be powered through IEEE 802.3 certified PSE. 1.3.2 Installation procedure CS5113LP can be fed with DC voltage ranges from 12V to 36Vdc. The dc plug is 2.5mm locked type. Once powered on, CS5113LP is ready to communicate with server through Ethernet port for configuration and RTLS functions.
9 1.3.3 Product Specifications
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu