Convergence Systems CS463C1GEN2 RFID Reader User Manual CSL CS101 2 EPC Class 1 Gen 2 RFID Handheld Reader

Download:
Mirror Download [FCC.gov]
Document ID	3870319
Application ID	GlzXmj3RL+sdVKChEgfiDw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	143.31kB (1791385 bits)
Date Submitted	2018-05-31 00:00:00
Date Available	2018-06-01 00:00:00
Creation Date	2018-05-30 16:25:22
Producing Software	Microsoft® Word 2013
Document Lastmod	2018-05-30 16:25:22
Document Title	CSL CS101-2 EPC Class 1 Gen 2 RFID Handheld Reader
Document Creator	Microsoft® Word 2013
Document Author:	CNE

CS463-2 EPC Class 1 Gen 2 RFID
4-Port Reader User’s Manual
Version 4.0
CSL: The One-Stop-Shop for RFID
Solutions
USER'S MANUAL, VERSION 4.0
Content
CONTENT................................................................................................................................................... 2
FCC AND IC STATEMENT ............................................................................................................................. 3
INTRODUCTION
3.1
3.2
3.3
………………………………………………………………………………………………………………………………….6
CS463-2 RFID 4-PORT FIXED READER ............................................................................................................6
Basic Package Content ............................................................................................................................7
PRODUCT SPECIFICATION ...............................................................................................................................8
INTRODUCTION ....................................................................................................................................... 10
4.1
BASIC HARDWARE ......................................................................................................................................10
4.2
POWER SUPPLY ..........................................................................................................................................12
4.3 DEMO SOFTWARE ON PC...................................................................................................................................13
4.4
GPIO Port Signals……………………………………………………………………………………………………………………………...
15
APPENDIX A. FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE ......................................................... 17
APPENDIX B. LINK PROFILES OF CS463-2 RFID READING ................................................................................... 18
APPENDIX C. ANTENNA PORTS OPERATION DESCRIPTION ……………………………………………………………………………. 19
Copyright © Convergence Systems Limited, All Rights Reserved
USER'S MANUAL, VERSION 4.0
FCC and IC Statement
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Copyright © Convergence Systems Limited, All Rights Reserved
USER'S MANUAL, VERSION 4.0
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with minimum distance of 20cm between the
radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
IC STATEMENT
IC Notice to Canadian Users
This device complies with industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause undesired
operation of the device.
This device complies with RSS-247 of industry Canada. Operation is subject to the condition that this
device does not cause harmful interference.
This Class B digital apparatus complies with Canadian ICES-003(Cet appareil numérique de classe B est
conforme à la norme NMB-003 du Canada).
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance of 30cm between the radiator and
your body. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Copyright © Convergence Systems Limited, All Rights Reserved
USER'S MANUAL, VERSION 4.0
Cet équipement est conforme aux limites d’exposition aux rayonnements de la IC établies pour
unenvironnement non contrôé. Cet équipement doit être installé et fonctionne r à au moins 30cm de
distance d’un radiateur ou de votre corps.
Copyright © Convergence Systems Limited, All Rights Reserved
USER'S MANUAL, VERSION 4.0
Introduction
3.1
CS463-2 RFID 4-port Fixed Reader
The CS463-2 RFID 4-port fixed reader is a reader designed to work with an any personal
computer via the ethernet connection, where the application on the PCs would control the
CS463-2 reader to perform RFID tag reading and GPIO port ON/OFF operation.
Below photo shows the typical connection during operation of CS463-2 4-port fixed reader
Note: DO NOT use any antenna not including in the shipment package or specify within the
product manual. Use only the Power Adaptor Unit included in the package.
Copyright © Convergence Systems Limited, All Rights Reserved
USER'S MANUAL, VERSION 4.0
3.2
Product Package
3.2.1
Basic Package Content
The reader package contains:
•
•
•
A 4-port fixed reader
Power Adaptor Unit
Dipole antenna – 2 piece
•
GPIO cable
-- 1 piece
Copyright © Convergence Systems Limited, All Rights Reserved
USER'S MANUAL, VERSION 4.0
3.3
Product Specification
Figure 3-1 CS463-2 4-port Reader
Features:








ISO 18000-6C and EPCglobal Class 1 Gen 2 UHF RFID protocol compliant including
dense reader mode
Ultra long read range – peak at more than 18 meters for Monza R6 Dogbone tag
Sophisticated data handling for efficient management of large streams of tag data.
Highly configurable buffering and tag filtering modes to eliminate the redundant tag data
so as to reduce LAN traffic and server loading
Robust performance in dense-reader environments
Excellent in transmit and receive mode – generates a different combination of unique
reader-to-tag command rate, tag-to-reader backscatter rate, modulation format, and
backscatter type
Configurable parameters offer maximum throughput and optimal performance
Supports all Gen 2 commands, including write, lock and kill
Copyright © Convergence Systems Limited, All Rights Reserved
USER'S MANUAL, VERSION 4.0
Specifications:
Physical Characteristics:
Length: 272 cm; Width: 152 cm; Height: 24 cm;
Weight: 720 grams
Environment:
Operating Temp: -200C to 500C
Storage Temp:
-400C to 850C
Humidity: 5% to 95% non-condensing
Antenna:
External antenna has a RP-SMA male connector
RF Power:
Internal conducted power 30 dBm
EIRP Power:
35 dBm (With CS771S-2)
RFID Frequency Ranges:
902-928 MHz band
Connectivity
Ethernet , Serial(RS232) , USB (Host) , USB Client ,
WiFi 802.11b/g/n , Bluetooth 4.0
Accessories:
GPIO cable
Order Code:
CS463-2
Restrictions on Use:
Approvals, features and parameters may vary
depending on country legislation and may change
without notice
Copyright © Convergence Systems Limited, All Rights Reserved
USER'S MANUAL, VERSION 4.0
Introduction
4.1
Basic Hardware
The CSL CS463-2 handheld RFID Reader is an EPCglobal Class 1 Gen 2 handheld reader
product.
Below is the top view of the CS468-2 4-port reader. There are LEDs to indicate the operating
status
1) Power On
2)
3)
RFID Read
Active antenna port being selected (default port 0)
Figure 4-1 CS463-2 4-port Reader Top View
Copyright © Convergence Systems Limited, All Rights Reserved
10
USER'S MANUAL, VERSION 4.0
Below is the left side and rear side view of the CS463-2 reader. There are 5 LEDs on this side,
from left to right, representing respectively:
USB Host
USB Client
GPIO Port
WiFi1/BT Port
Four RFID Output Ports
Figure 4-2a : CS463-2 Reader Front-side View
DC+12V
Ethernet Port
Serial RS232 Port
Figure 4-3b : CS463-2 Reader Left-side View
WiFi2 Port
Figure 4-4c: CS463-2 Reader Rear-side View
Copyright © Convergence Systems Limited, All Rights Reserved
11
USER'S MANUAL, VERSION 4.0
4.2
Power Supply
1) Power Adaptor Unit
CS463-2 4-port reader can be power up with the power adaptor unit included in the
package. This will guarantee that CS463-2 4-port reader can operating in the optimal
condition. Below show the typical connection to use the power adaptor.
2) PoE
CS463-2 also supports the use of power over Ethernet (PoE). Below shows the typical
connection of using PoE as the power supply to the CS463-2 4-port reader.
Copyright © Convergence Systems Limited, All Rights Reserved
12
USER'S MANUAL, VERSION 4.0
4.3 Demo Software on PC
The CS463-2 can be controlled via the Ethernet. In this case user need to connect the PC with
CS463-2 with a Ethernet cable directly or via a router.
Below is the screen capture of a Demo application, which is also available for download from
Convergence website (www.convergence.com.hk), on PC controlling CS463-2. Everything is
self-explanatory in the application:
Figure 4-5 PC Application Screen – controlling CS463-2 via ethernet
Copyright © Convergence Systems Limited, All Rights Reserved
13
USER'S MANUAL, VERSION 4.0
Below shows the main menu of the PC Demo application. User can perform typical basic tag
operations via this PC Demo application as mentioned below.





Inventory
Tag memory bank read and write
GPIO On/Off control
Antenna port settings
Output power settings
Fig 4-6 Main menu of PC Demo application
For example, if user need to carry out inventory operation, it is necessary to click the
“Inventory” icon in Fig 4-6. The corresponding sub-menu has been shown in Fig 4-7 below.
Copyright © Convergence Systems Limited, All Rights Reserved
14
USER'S MANUAL, VERSION 4.0
Fig 4-7 Inventory operation using PC Demo application
Copyright © Convergence Systems Limited, All Rights Reserved
15
USER'S MANUAL, VERSION 4.0
4.4
GPIO Port Signals
Below figure shows the output and input signal for the GPIO signals.
GPI : Input ports
GPO : Output ports
GPI4(+)
GPI3(+)
GPO4(-)
GPO4(+)
GPO3(+)
GPI2(+)
GPI1/GPI3 (-)
GPI2/GPI4(-)
GPO2(-)
GPO1(-)
GND
GPI1(+)
GPO2(+)
GPO1(+)
+5V
Fig 4-8 GPIO Input and Output signals
Copyright © Convergence Systems Limited, All Rights Reserved
16
USER'S MANUAL, VERSION 4.0
Appendix A. Federal Communications
Commission Compliance
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna


Increase the separation between the equipment and receiver
Consult the dealer or an qualified radio/TV technician for assistance
FCC NOTICE:
To comply with FCC part 15 rules in the United States, the system must be professionally
installed to ensure compliance with the Part 15 certification. It is the responsibility of the
operator and professional installer to ensure that only certified systems are deployed in the
United States. The use of the system in any other combination (such as co-located antennas
transmitting the same information) is expressly forbidden.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Note:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Copyright © Convergence Systems Limited, All Rights Reserved
17
USER'S MANUAL, VERSION 4.0
Appendix B. Link Profiles of CS463-2 RFID
Reading
Link Profile
R-T Modulation
DSB-ASK
PR-ASK
PR-ASK
DSB-ASK
Tari (μs)
25.00
25.00
25.00
6.25
1.00
0.50
0.50
0.50
PW (Pulse Width in usec)
12.50
12.50
12.50
3.13
RTcal (usec)
75.00
62.50
62.50
15.63
TRcal (usec)
200.00
85.33
71.11
20.00
DR (Divide Ratio)
64/3
64/3
T-R Modulation
FM0
Miller-4
Miller-4
FM0
TRExt
LF (kbps)
40
250
300
400
Data Rate (kbps)
40
62.5
75
400
Copyright © Convergence Systems Limited, All Rights Reserved
18
USER'S MANUAL, VERSION 4.0
Appendix C. Antenna ports operation description
CS463-2 is a 4 port reader where the ports are switched on in time one by
one. At any time only 1 port is switched on and the RF power comes out
only at that port. The rest of the ports are turned off so that no energy
comes out from the other ports.
The control logic of the antenna is shown as below table
Time
Slot
Antenna Port
Status
P0 P1 P2 P3
On Off Off Off
Off On Off Off
Off Off On Off
Off Off Off On
The Antenna should be set up 0.5 meter apart is shown as below:
0.5 meter
Antenna 1
Antenna 2
………
Antenna 4
Energy coming out of 1 antenna (note that CS463-2 is switched on in time
one by one so that at any 1 moment in time ONLY 1 antenna is turned on)
Copyright © Convergence Systems Limited, All Rights Reserved
19

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 19
Language                        : zh-HK
Tagged PDF                      : Yes
Title                           : CSL CS101-2 EPC Class 1 Gen 2 RFID Handheld Reader
Author                          : CNE
Subject                         : User's Manual
Creator                         : Microsoft® Word 2013
Create Date                     : 2018:05:30 16:25:22+08:00
Modify Date                     : 2018:05:30 16:25:22+08:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools