Convergence Systems CS468INTC1GEN2 RFID Reader User Manual User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2477584
Application ID	io/j4R5OSBsdjFa8BY4sSw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.03kB (350336 bits)
Date Submitted	2014-12-18 00:00:00
Date Available	2014-12-18 00:00:00
Creation Date	2014-12-17 10:35:33
Producing Software	GPL Ghostscript 8.71
Document Lastmod	2014-12-17 10:35:33
Document Title	Microsoft Word - CSL CS468-2INT User's Manual Version 1. 0.3.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	waikin.chan

CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
USER'S MANUAL, VERSION 1.0.3
CSL CS468-2INT EPC Class 1 Gen 2 RFID
Fixed Reader
User’s Manual
Version 1.0.3
CSL: The One-Stop-Shop for RFID Solutions
Copyright © Convergence Systems Limited, All Rights Reserved
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
USER'S MANUAL, VERSION 1.0.3
Content
CONTENT .......................................................................................................................................................2
FCC STATEMENT .........................................................................................................................................3
INTRODUCTION ............................................................................................................................................4
3.1
3.1.1
Basic Package Content .......................................................................................................................4
3.1.2
Product Specifications ........................................................................................................................5
INSTALLATION ............................................................................................................................................7
4.1
4.1.1
4.2
PRODUCT PACKAGE .................................................................................................................................4
DEVICES ..................................................................................................................................................7
Reader ................................................................................................................................................7
OPERATING SETUP ...................................................................................................................................9
REGULATORY INFORMATION .............................................................................................................. 11
5.1
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT ................................................ 11
APPENDIX A. RFID BASICS .............................................................................................................................. 15
APPENDIX B. OPERATION PROFILES ........................................................................................................... 16
APPENDIX C. RF CHANNELS ........................................................................................................................... 17
Copyright © Convergence Systems Limited, All Rights Reserved
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
USER'S MANUAL, VERSION 1.0.3
FCC Statement
FCC NOTICE: To comply with FCC part 15 rules in the United States, the system
must be
professionally installed to ensure compliance with the Part 15 certification. It is the
responsibility
of the operator and professional installer to ensure that only certified systems are
deployed in the
United States. The use of the system in any other combination is expressly
forbidden.
Copyright © Convergence Systems Limited, All Rights Reserved
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
Introduction
3.1
Product Package
3.1.1
Basic Package Content
USER'S MANUAL, VERSION 1.0.3
The reader package contains:
•
•
•
Fixed reader with 16 RF ports
USB cable
GPIO cable
•
•
•
12V switching power supply
Extended mounting stud and nuts
Plastic caps for connectors and cables
Copyright © Convergence Systems Limited, All Rights Reserved
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
USER'S MANUAL, VERSION 1.0.3
3.1.2 Product Specifications
Fig 3-1
CS468-2INT Reader
Features:
•
•
•
•
•
•
•
•
•
•
ISO 18000-6C and EPCglobal Class 1 Gen 2 UHF RFID protocol compliant including
dense reader mode
Ultra long read range – peak at 9 meters for UPM Dogbone RFID tag
Ultra high read rate – peak at 300 tags per second
Sophisticated data handling for efficient management of large streams of tag data.
Highly configurable buffering and tag filtering modes to eliminate the redundant tag data
so as to reduce LAN traffic and server loading
400 kbps tag-to-reader data rate profile
Robust performance in dense-reader environments
Excellent in transmit and receive mode – generates a different combination of unique
reader-to-tag command rate, tag-to-reader backscatter rate, modulation format, and
backscatter type
Configurable parameters offer maximum throughput and optimal performance
Supports all Gen 2 commands, including write, lock and kill
Copyright © Convergence Systems Limited, All Rights Reserved
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
USER'S MANUAL, VERSION 1.0.3
Specifications:
Physical Characteristics:
Reader:
Length: 27 cm; Width: 16 cm; Height: 2.4 cm; Weight: 700g
Switch:
Length: 16cm; Width: 13.5; Height: 2cm; Weight:415g
Operating Temp:
Storage Temp:
Environment:
Humidity:
Power:
RFID Frequency Ranges:
Interfaces
Maximum Tag Read Rate:
Maximum Speed of Tag:
Accessories:
Order Code:
Restrictions on Use:
-200C to 500C
-400C to 850C
5% to 95% non-condensing
12 Volt supplied via an AC/DC adaptor or IEEE 802.3af
compliant Power Over Ethernet enabled power source
902~928MHz ISM band
LAN TCP/IP
( Configurable to use fixed IP address or DHCP )
300 tag/sec.
660 ft/min
•
USB cable
•
GPIO cable
•
12V switching power supply
•
Extended mounting stud and nuts
•
Plastic caps for connectors and cables
CS468-2INT
Approvals, features and parameters may vary depending on
country legislation and may change without notice
Copyright © Convergence Systems Limited, All Rights Reserved
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
Installation
4.1
Devices
4.1.1
Reader
USER'S MANUAL, VERSION 1.0.3
The CSL CS468-2INT fixed RFID Reader is an EPCglobal Class 1 Gen 2 reader product.
Figure 4-1 CS468-2INT Reader Top View
GPIO
USB
Figure 4-2 CS468-2INT Reader Side View
Copyright © Convergence Systems Limited, All Rights Reserved
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
12VDC
USER'S MANUAL, VERSION 1.0.3
Ethernet
Figure 4-3 CS468-2INT Reader Side View
Copyright © Convergence Systems Limited, All Rights Reserved
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
4.2
USER'S MANUAL, VERSION 1.0.3
Operating Setup
CS468-2INT has two power up modes: POE mode and 12V adaptor mode.
PoE Adaptor or Ethernet Switch with
PoE output port
PC
CS771S-2
Ethernet Cable 1
AC100~240V
PoE Output
Antenna or
Test
Equipment
with 50R
Input port
Ethernet Cable 2
RF Cable
CS468-2INT
RF Output: SMA RP Jack
Figure 4-4 POE mode Setup
The reader is connected to POE enabled power source’s output port via the cable provided in
the package.
Copyright © Convergence Systems Limited, All Rights Reserved
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
USER'S MANUAL, VERSION 1.0.3
AC/DC Adaptor
CS771S-2
PC
DC12V
AC100~240V
Antenna or
Test
Equipment
with 50R
Input port
Ethernet Cable
RF Cable
CS468-2INT
RF Output: SMA RP Jack
Figure 4-5
12V power adaptor mode Setup
The reader is directly connected to a host computer via the cable provided in the package.
Copyright © Convergence Systems Limited, All Rights Reserved
10
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
USER'S MANUAL, VERSION 1.0.3
Regulatory Information
5.1
Federal Communications Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter. This product must be installed by a professional
technician/installer.
Copyright © Convergence Systems Limited, All Rights Reserved
11
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
USER'S MANUAL, VERSION 1.0.3
Antenna Setup
CS468-2INT is a 16 port reader where the ports are switched on in time
one by one. At any time only 1 port is switched on and the RF power comes
out only at that port. The rest of the ports are turned off so that no energy
comes out from the other ports.
The control logic of the antenna is shown as below table
Time
Antenna Port Status
Slot
P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15
On Off Off Off Off Off Off Off Off Off Off Off Off Off Off Off
Off On Off Off Off Off Off Off Off Off Off Off Off Off Off Off
Off Off On Off Off Off Off Off Off Off Off Off Off Off Off Off
Off Off Off On Off Off Off Off Off Off Off Off Off Off Off Off
Off Off Off Off On Off Off Off Off Off Off Off Off Off Off Off
Off Off Off Off Off On Off Off Off Off Off Off Off Off Off Off
Off Off Off Off Off Off On Off Off Off Off Off Off Off Off Off
Off Off Off Off Off Off Off On Off Off Off Off Off Off Off Off
Off Off Off Off Off Off Off Off On Off Off Off Off Off Off Off
10
Off Off Off Off Off Off Off Off Off On Off Off Off Off Off Off
11
Off Off Off Off Off Off Off Off Off Off On Off Off Off Off Off
12
Off Off Off Off Off Off Off Off Off Off Off On Off Off Off Off
13
Off Off Off Off Off Off Off Off Off Off Off Off On Off Off Off
14
Off Off Off Off Off Off Off Off Off Off Off Off Off On Off Off
15
Off Off Off Off Off Off Off Off Off Off Off Off Off Off On Off
16
Off Off Off Off Off Off Off Off Off Off Off Off Off Off Off On
Copyright © Convergence Systems Limited, All Rights Reserved
12
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
USER'S MANUAL, VERSION 1.0.3
The Antenna should be set up 0.5 meter apart is shown as below:
0.5 meter
Antenna 1
Antenna 2
………
Antenna 16
Energy coming out of 1 antenna (note that
CS468-2INT is switched on in time one by
one so that at any 1 moment in time ONLY
1 antenna is turned on)
Copyright © Convergence Systems Limited, All Rights Reserved
13
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
USER'S MANUAL, VERSION 1.0.3
CS771S Ant-1
CS468-2INT
Reader
CS771S
Ant-2
CS771S
Ant-3
CS771S Ant-4
P0
P1
CS771S
Ant-5
P2
P3
CS771S Ant-6
P4
P5
CS771S Ant-7
P6
P7
CS771S Ant-8
P8
P9
P10
CS771S Ant-9
CS771S Ant-10
P11
P12
CS771S Ant-11
P13
P14
CS771S Ant-12
P15
CS771S Ant-13
The CS468-2INT Reader is at
time slot-5 at this moment. The
port-4 is turned on. So only
Ant-5 is active for transmitting
the power at this moment.
CS711S Ant-14
CS771S Ant-15
CS771S Ant-16
The distance between each antenna should be 50cm or more
Copyright © Convergence Systems Limited, All Rights Reserved
14
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
USER'S MANUAL, VERSION 1.0.3
Appendix A. RFID Basics
Passive tag RFID technology involves the reader, the antenna and the tag.
The reader sends out energy in the relevant frequency band to the antenna via RF cables, and
the antenna radiates the energy out.
This energy impinges on an RFID tag.
The RFID tag consists of an antenna coupled to an RFID IC. This IC converts the AC voltage
it receives at the antenna port to DC voltage that in turn is used to empower the digital circuit
inside.
The digital circuit then turns on and off some components connected to the antenna port,
thereby changing its scattering behavior, in a pre-designed clock rate.
This changing of antenna port parameters then causes a “modulation” of the back-scattered RF
energy.
This modulated back-scattered energy is detected by the reader and the modulation is captured
and analyzed.
Copyright © Convergence Systems Limited, All Rights Reserved
15
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
USER'S MANUAL, VERSION 1.0.3
Appendix B. Operation Profiles
Region 2: FCC
Profile
R-T Modulation DSB-ASK DSB-ASK PR-ASK PR-ASK DSB-ASK PR-ASK
Tari (µs)
12.50
25.00
25.00
6.25
25.00
R-T speed (kbps) 40
80
40
40
160
40
PIE
2:1
1.5:1
1.5:1
1.5:1
1.5:1
Pulse Width (uS) 12.50
6.25
12.50
12.50
3.13
12.50
T-R LF (kbps)
40
160
250
300
400
250
T-R Modulation
FM0
Miller-2
Miller-4
Miller-4
FM0
Miller-2
Divide Ratio
64/3
64/3
64/3
80
62.5
75
400
125
T-R Data
(kbps)
25.00
2:1
Rate 40
Copyright © Convergence Systems Limited, All Rights Reserved
16
CSL CS468-2INT EPC CLASS 1 GEN 2 RFID FIXED READER
USER'S MANUAL, VERSION 1.0.3
Appendix C. RF channels
Region 2: FCC
Channel
Frequency
Channel
Frequency
Channel
Frequency
number
(MHz)
number
(MHz)
number
(MHz)
902.75
18
911.25
35
919.75
903.25
19
911.75
36
920.25
903.75
20
912.25
37
920.75
904.25
21
912.75
38
921.25
904.75
22
913.25
39
921.75
905.25
23
913.75
40
922.25
905.75
24
914.25
41
922.75
906.25
25
914.75
42
923.25
906.75
26
915.25
43
923.75
10
907.25
27
915.75
44
924.25
11
907.75
28
916.25
45
924.75
12
908.25
29
916.75
46
925.25
13
908.75
30
917.25
47
925.75
14
909.25
31
917.75
48
926.25
15
909.75
32
918.25
49
926.75
16
910.25
33
918.75
50
927.25
17
910.75
34
919.25
Copyright © Convergence Systems Limited, All Rights Reserved
17

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 17
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : df96603d-87f0-11e4-0000-3fa06451bc25
Producer                        : GPL Ghostscript 8.71
Modify Date                     : 2014:12:17 10:35:33+08:00
Create Date                     : 2014:12:17 10:35:33+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Document ID                     : df96603d-87f0-11e4-0000-3fa06451bc25
Format                          : application/pdf
Title                           : Microsoft Word - CSL CS468-2INT User's Manual Version 1. 0.3.doc
Creator                         : waikin.chan
Author                          : waikin.chan

EXIF Metadata provided by EXIF.tools