Convoy Technologies C7000 CT-C7000 Wireless Video Camera User Manual x

CONVOY TECHNOLOGIES L.L.C. CT-C7000 Wireless Video Camera x

Users Manual

Download: Convoy Technologies C7000 CT-C7000 Wireless Video Camera User Manual x
Mirror Download [FCC.gov]Convoy Technologies C7000 CT-C7000 Wireless Video Camera User Manual x
Document ID2384309
Application IDC7zyLsm71UTKDNgVbuDAtA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize32.09kB (401065 bits)
Date Submitted2014-09-11 00:00:00
Date Available2014-09-11 00:00:00
Creation Date2014-09-05 16:40:54
Producing SoftwareAcrobat Distiller 6.0.1 (Windows)
Document Lastmod2014-09-05 16:46:08
Document TitleMicrosoft Word - User Manual.docx
Document CreatorPScript5.dll Version 5.2
Document Author: user

USER MANUAL
For MAGCAM -- REMOVABLE WIRELESS BATTERY
OPERATED CAMERA
Please read this manual thoroughly before operating the unit,
and keep it for further reference.
Page 1 of 5
Table of Contents
1.
PRODUCT/SERVICE DESCRIPTION ................................................................................................... 3
1.1 PRODUCT CONTEXT ................................................................................................................. 3
1.2 USER CHARACTERISTICS........................................................................................................ 3
2.3 OPERATION................................................................................................................................. 3
2. PRECAUTIONS ............................................................................................................................. 3,4
3. SYSTEM AND COMPONENTS ................................................................................................................... 4
3.1 WIRELESS RF TRANSMITTER ................................................................................................. 5
Page 2 of 5
Product/Service Description
1.1 Product Context
A battery powered wireless camera product that is specifically designed for tractor trailer
vehicles and/or unmarried vehicles on the road. This camera system will provide a
removable (magnetic) camera and monitoring solution to better assist drivers overcome
the blind spots around their tractors and trailers.
1.2.
User Characteristics
Tractor Trailers are among the largest vehicles on the road. Because of their size and the amount of
deliveries they make, they are often times found required to maneuver in very tight spaces at the delivery
destinations, along our highways or parking structures. Currently, because the tractor and trailer are not
permanently connected to each other, there is no way to run cables to and from the cab of the tractor back
to the trailer, especially since the tractor usually operates different trailers. This solution is using wireless
RF technology and a combination of specially designed magnetics, cameras, and rechargeable batteries.
Most trailers (93%+) do not have power being sent from the tractor to the trailer. A battery powered
wireless solution addresses this need in the automotive industry.Solution: This wireless camera system can
be attached to any trailer, in a nonpermanent manner, using magnets and batteries enclosed in a single
housing where the camera is located. Today, while the driver is backing into a loading dock or driving in a
“populated” parking lot/structure, he is often required to have a spotter and turn on his flashers and use his
mirrors. This magnetic, rechargeable, wireless camera can now be attached to any part of the trailer and
provide immediate infrared, night vision, video to the cab through an existing or one of our proprietary
monitors. The camera will NOT “crosstalk” with any other cameras as it is individually paired with a
monitor/receiver at any given time. Following product generations will add a solar panel and permanently
mounted camera, recharged using photovoltaic cells.
1.3. Operation
This wireless backup camera system is designed to be used temporarily for difficult
tractor/trailer maneuvers; it is NOT A PERMANENT SYSTEM FOR DRIVING ON
THE ROAD.
WARNING: The driver must insure that the unit is removed from the back of the
trailer before continuing driving.
The monitor unit has a secondary Red LED indication that pairing was interrupted.
2. Precautions
● Storage and keeping
1. Do not expose the monitor to excessive heat or cold. The storage temperature of
this device is -20 ~+65Ԩ, and the operating temperature is -10 ~+65Ԩ. The
Humidity is Rh90%.
2. Never use this device near a bathtub, wash basin, kitchen, damp basement,
swimming pool or similar place.
3. Never use this device in environments with excessive moisture, dust or smoke.
4. Avoid dropping or striking this device.
Page 3 of 5
5. Avoid using this device in enclosed spaces, areas with excessive vibration or
subject to severe impacts.
6. Never puncture, scratch or use abrasive cleaning materials on this device.
7. Do not place cables where they may be pinched or stepped on.
8. Leave at least a 2”space between the unit and walls, or other objects to allow
adequate air circulation around the unit.
9. The wireless camera must be removed and stored back in the driver cabin before
continuing driving.
● Operating Precautions
1. The device has a Lithium Ion battery. Charging can be powered by a 12 volt
automotive battery or vehicle electrical system.
2. For monitor/Receiver and Charger, make sure all cables are connected properly
observe polarity. Improper cable connections may damage the system. Remove
the power cable connections when you do not intend to use the unit.
3. System and components. Diagram and Technical Specifications.
3.1. Wireless RF Transmitter
Page 4 of 5
RF 2.4GHz technology(POWER SUPPLY)
12V
TX (Current Consumption)
TYPE:330mA, Max.400mA
Environmental Specification
Operating Temperature
-10~+60 ºC
Storing Temperature
-30~+85 ºC
Operating humidity
85%RH
BASEBANGD SPEC.
POWER ON
Latency
Resolution
Frame Rate
2SEC Max. RE
TBD Max. SE/AV
100ms Max. RE
TBD Max. SE/AV
VGA/640X480 RE
PAL:720X576/NTSC:720X480 SE/AV
30f/s
NTSC:30f/s/PAL: 25f/s SE/AV
Video Codec
MPEG4
TX(Video in System)
PAL/NTSC Auto detection
(Voice Sample Rate)
(Voice Frequecny Band)
8KHz M RE/SE
48KHz AV
340Hz~3.4KHz RE/SE
20Hz~20KHz AV
(ID)/(BIT)
Pairing)/22(4KK)
(SYSTEM Architecture)
ARM9(32Bit) SOC
(RF SPEC.)
(Operation Frequency)
2403 ~ 2478MHz*
(RF Impedance)
50Ω, Typ.
Page 5 of 5
FCC Certification Requirements
Caution: Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 6
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:a3330a2c-8889-4867-9d6f-f7026a86dbe1
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2014:09:05 16:46:08+08:00
Create Date                     : 2014:09:05 16:40:54+08:00
Metadata Date                   : 2014:09:05 16:46:08+08:00
Document ID                     : uuid:926db79f-ef2b-44c6-9f2d-8e50ce55f887
Format                          : application/pdf
Title                           : Microsoft Word - User Manual.docx
Creator                         : user
Author                          : user
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AA4QC7000

Navigation menu