CooSpo Tech BK8 bike speed/cadence sensor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2996063
Application ID	ZVZwvl3IIWzmh7CPS0zCtA==
Document Description	usermanual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	66.22kB (827750 bits)
Date Submitted	2016-05-19 00:00:00
Date Available	2016-05-19 00:00:00
Creation Date	2015-05-15 11:05:02
Producing Software	Adobe PDF library 9.90
Document Lastmod	2015-05-15 17:22:39
Document Title	Users Manual
Document Creator	Adobe Illustrator CS5

9. Refer to the APP instructions to pair and calibrate it with Bike Speed&Cadence Sensor
and to display its data on the APP.
Bike Speed&Cadence
sensor
10. Periodically check the cable ties and spoke screw to make sure that they are secure.
BATTERIES
The transmitter use 1pc CR2032 3V battery. The battery already installed. The battery typically
last one year. We highly recommend that you contact the retailer or our customer service
department if you need to replace them.
1. Using a coin, twist the battery door counter clockwise until it clicks out of place.
RPM sensor
2. Remove the old battery and insert the new battery with the +side upwards.
speed
transmitter
This Bike Speed&Cadence Sensor consists of a separate Cadence Sensor wired to a
Speed+Distance Sensor that has a battery hatch and a buletooth4.0 transmitter. The sensor includes
two magnets to activate the sensors and cable ties for installation.
Bike Cadence Sensor
IMPORTANT
Bike Speed+
Distance
Sensor
Cadence Magnet
1. Non-rechargeable and rechargeable batteries must be disposed of properly. For this
purpose, special containers are provided for non-rechargeable and rechargeable battery
disposal at communal collection centers.
2. Batteries are extremely dangerous when swallowed! Therefore, keep batteries and small
articles away from children. If a battery has been swallowed seek immediate medical
advice.
3. The batteries supplied must not be recharged, reactivated by any other means,
dismantled, put into fire or short-circuited.
SUPPORTED DEVICE
Spoke Magnet
Rubber Pad
A. This device is a Bluetooth Smart and ANT+ device compatible with many smart
Phones including:
a) iPhone 4S and newer
INSTRUCTIONS
b) New iPad and newer
This Bike Speed&Cadence Sensor is mounted to the non-drive chainstay – the side of the
bicycle opposite from the chain.
c) iPad mini
1. Using two Cable Ties, loosely hang the Cadence Sensor (A) from the underside of
the chainstay.
e) GALAXY A3,A5,S4,S5,Note3,etc
2. With the bare side of the Cadence Magnet (D) placed against the backside of the crank
arm, loosely attach the Cadence Magnet to the crank arm using a Cable Tie (F).
-See picture.
3. Align the magnet so the molded ridge between
"CADENCE MAGNET" passes by the symbol "RPM"
printed. Make sure the Cadence Magnet passed
within 3/8" (10 mm) of the Cadence Sensor.
a) Wahoofitness
b) Strava
* All brand names and trademarks are properties of their respective owners.
TROUBLESHOOTING
4. Tighten the Cable Tie for the Cadence Magnet, remove
the adhesive covers on the Cadence Sensor, and tighten
its Cable Ties.
NOTE: Bicycles with triple chainring cranksets and/
or S-bend chainstays may require either the Cadence
Magnet or the Cadence Sensor to be shimmed in order
to get both pieces within correct proximity.
CAUTION: Be careful not to damage the covered wire between the connected sensors.
5. Place the rubber pad (C) on the bottom of the Speed+Distance Sensor (B), and loosely attach it
Make sure the battery hatch faces away from the
wheel for easy access.
6. Remove the screw from the Spoke Magnet (E), place
the part onto a rear wheel spoke so the bare magnet
side passes within 3/8” (10 mm) of the center of the
Speed+Distance Sensor.
7. Install the screw, align the Spoke Magnet, and
tighten the screw on the spoke. Make sure that it is
still aligned with the Speed+Distance Sensor.
NOTE: Location of the Speed+Distance Sensor on the
chainstay may depend on Spoke Magnet placement,
the bicycle type, and/or the drive chain type, or the
position of the attached Cadence Sensor.
NOTE: Bicycles with triple chainring cranksets and/
or S-bend chainstays may require the canting of the
Speed+Distance Sensor toward the Spoke Magnet in
order to get both pieces within correct proximity.
CAUTION: Be careful not to damage
the covered wire between the
connected sensors.
NOTE: Bicycles with triple chainring
cranksets and/or S-bend chainstays may
require the canting of the Speed+Distance
Sensor toward the Spoke Magnet in order
to get both pieces within correct proximity.
f) Xperia E3,Z3,C3,T3,X8,5L.etc
B. In addition, this device is also recommended to work with the following APPs:
c) MapMyRide
NOTE: Magnet placement on the crank arm may
depend upon the Cadence Sensor placement,
the bicycle type and/or the drive chain type.
8. Tighten the Cable Ties for the
Speed+Distance Sensor, and trim the
ends of all the cable ties with a scissor
or diagonal cutter.
d) iPod Touch5 and newer
Why my App cannot connect to the Speed&Cadence sensor?
1. Please confirm the Bluetooth/ANT+ and the Speed & Cadence function in your App is open.
2. If you are not using an APP, please confirm the App you using can support Bluetooth
Smart/ANT+.
3. The Bike Speed & Cadence Sensor Bluetooth/ANT+ sync function will be automatically shut
down when there is no Bluetooth/ANT+ connection , please rotate the crank to turn on the
sensor and launch the connection, the sensor will be on for 1min after benign waked up, if
there is no connection from the App during the time, the sensor will go into sleep mode.
4. Please confirm the distances from the sensor and your mobile phone is within 2 meters.
5. Please check the battery installed in the sensor, exchange the battery if it is dead.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Create Date                     : 2015:05:15 11:05:02+09:00
Metadata Date                   : 2015:05:15 17:22:39+08:00
Modify Date                     : 2015:05:15 17:22:39+08:00
Creator Tool                    : Adobe Illustrator CS5
Thumbnail Width                 : 196
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 18501 bytes, use -b option to extract)
Instance ID                     : uuid:aa5a0d3c-d236-4edc-b039-400d630bf165
Original Document ID            : xmp.did:2BDBABB22749E311A3F5D910886A2201
Document ID                     : xmp.did:50BF4B2BAFFAE41196EDA318C4B19CE9
Rendition Class                 : proof:pdf
History Action                  : converted, saved, saved
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows), Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /
History When                    : 2013:11:24 01:06:14+08:00, 2015:03:16 18:33:13+08:00, 2015:05:15 11:04:58+08:00
History Instance ID             : xmp.iid:5DCF77D9C7CBE411BBA3FBBBABF499B6, xmp.iid:50BF4B2BAFFAE41196EDA318C4B19CE9
Derived From Instance ID        : uuid:93bd948f-83e8-4939-9640-cc4af355008a
Derived From Document ID        : xmp.did:5DCF77D9C7CBE411BBA3FBBBABF499B6
Derived From Original Document ID: xmp.did:2BDBABB22749E311A3F5D910886A2201
Derived From Rendition Class    : proof:pdf
Format                          : application/pdf
Title                           : 改版K804说明书第三版
Producer                        : Adobe PDF library 9.90
Trapped                         : False
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 210.000274
Max Page Size H                 : 297.000132
Max Page Size Unit              : Millimeters
Font Name                       : Arial-Black, Arial-BoldMT, ArialMT, MyriadPro-Bold, AdobeSongStd-Light, MyriadPro-Black
Font Family                     : Arial, Arial, Arial, Myriad Pro, Adobe 宋体 Std, MyriadPro Black-GBpc-EUC-H
Font Face                       : Black, Bold, Regular, Bold, L, Black-GBpc-EUC-H
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Unknown
Font Version                    : Version 5.06, Version 6.70, Version 6.70, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.016;PS 5.006;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False, False, False
Font File Name                  : ariblk.ttf, arialbd.ttf, arial.ttf, MyriadPro-Bold.otf, AdobeSongStd-Light.otf, AdobeHeitiStd-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: Artios_Crease
Swatch Groups Colorants Type    : SPOT
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 0.000000
Swatch Groups Colorants Magenta : 100.000000
Swatch Groups Colorants Yellow  : 100.000000
Swatch Groups Colorants Black   : 0.000000
Page Count                      : 1
Creator                         : Adobe Illustrator(R) 15.0
For                             : Administrator,
Bounding Box                    : -55 -18 608 859
Container Version               : 11
Creator Version                 : 15

EXIF Metadata provided by EXIF.tools