Corbin Russwin ML20900 ECL Electromechanical Mortise Lock Environmental Product Declaration (EPD) 141.1 ASSA ABLOY Mr EPD
User Manual: Corbin Russwin ML20900 ECL Electromechanical Mortise Lock - Environmental Product Declaration (EPD) Literature
Open the PDF directly: View PDF 
.
Page Count: 11
| Download | |
| Open PDF In Browser | View PDF |
ENVIRONMENTAL PRODUCT DECLARATION CORBIN RUSSWIN ML20900 ECL ELECTROMECHANICAL MORTISE LOCK The Corbin Russwin ML20900 ECL Electromechanical Lock, is an ANSI/BHMA A156.13 Series 1000 Grade 1 mechanical mortise lock. It has a reversible latch with stainless steel insert and an independent non-handed stainless steel deadlatch. ASSA ABLOY is committed to providing products and services that are environmentally sound throughout the entire production process and the product lifecycle. Our unconditional aim is to make sustainability a central part of our business philosophy and culture, but even more important is the job of integrating sustainability into our business strategy. The employment of EPDs will help architects, designers and LEED-APs select environmentally preferable door openings. The Corbin Russwin ML20900 ECL Electromechanical Mortise Lock EPD provides detailed requirements with which to evaluate the environmental and human health impacts related to producing our door openings. ASSA ABLOY will continue our efforts to protect the environment and health of our customers/end users and will utilize the EPD as one means to document those efforts. Corbin Russwin ML20900 Mortise Lock According to EN 15804 and ISO 14025 Dual Recognition by UL Environment and Institut Bauen und Umwelt e.V. This declaration is an environmental product declaration (EPD) in accordance w ith ISO 14025. EPDs rely on Life Cycle Assessment (LCA) to provide information on a number of environmental impacts of products over their life cycle. Exclusions: EPDs do not indicate that any environmental or social performance benchmarks are met, and there may be impacts that they do not encompass. LCAs do not typically address the site-specific environmental impacts of raw material extraction, nor are they meant to assess human health toxicity. EPDs can complement but cannot replace tools and certifications that are designed to address these impacts and/or set performance thresholds – e.g. Type 1 certifications, health assessments and declarations, environmental impact assessments, etc. Accuracy of Results: EPDs regularly rely on estimations of impacts, and the level of accuracy in estimation of effect differs for any particular product line and reported impact. Comparability: EPDs are not comparative assertions and are either not comparable or have limited comparability w hen they cover different life cycle stages, are based on different product category rules or are missing relevant environmental impacts. EPDs from different programs may not be comparable. PROGRAM OPERATOR DECLARATION HOLDER ULE DECLARATION NUMBER IBU DECLRATION NUMBER UL Environment Corbin Russwin, an ASSA ABLOY Group company 4786545067.141.1 EPD-ASA-20150144-IBA1-E N DECLARED PRODUCT ML20900 ECL Electromechanical EcoFlex Mortise Lock REFERENCE PCR IBU: PCR Locks and fittings (mechanical & electromechanical locks & fittings), 072014 DATE OF ISSUE PERIOD OF VALIDITY April 18, 2015 5 years General information Product / Product description CONTENTS OF THE LCA calculation rules DECLARATION LCA scenarios and further technical information LCA results References The PCR review was conducted by: IBU – Institut Bauen und Umwelt e.V. PCR was approved by the Independent Expert Committee (SVA) The CEN Norm EN 15804 serves as the core PCR. This declaration was independently verified in accordance with ISO 14025 by Underwriters Laboratories ☐ INTERNAL ☒ EXTERNAL Wade Stout This life cycle assessment was independently verified in accordance with EN 15804 and the reference PCR by: IBU – Institut Bauen und Umwelt e.V. 1. General Information Corbin Russwin ML20900 ECL Electromechanical Lock Programme holder IBU - Institut Bauen und Umwelt e.V. Panoramastr. 1 D-10178 Berlin Owner of the Declaration Corbin Russwin 225 Episcopal Rd Berlin, CT 06037 USA Declaration number EPD-ASA-20150144-IBA1-EN Declared product / Declared unit The declaration represents 1 mortise lock of the following types: - ML20900 ECL Electromechanical lock inclusive of lock body, latches, levers, roses, strikes and all mounting hardware. This Declaration is based on the Product Category Rules: Locks and fittings , 07-2014 (PCR tested and approved by the independent expert committee (SVA)) Scope: Issue date 18.05.2015 This EPD is based on the full lifecycle of 1 Corbin Russwin ML20900 ECL Electromechanical Lock. Data was collected from the lock case manufacturer in Berlin, Connecticut (US). The owner of the declaration shall be liable for the underlying information and evidence; the IBU shall not be liable with respect to manufacturer information, life cycle assessment data and evidences. Valid to 17.05.2020 Verification The CEN Norm EN 15804 serves as the core PCR Independent verification of the declaration and data according to ISO 14025 Prof. Dr.-Ing. Horst J. Bossenmayer (President of Institut Bauen und Umwelt e.V.) internally x externally Dr. Wolfram Trinius (Independent verifier appointed by SVA) Dr.-Ing. Burkhart Lehmann (Managing Director IBU) 2. Product 2.1 Product description The Corbin Russwin ML20900 ECL Electromechanical Lock, is an ANSI/BHMA A156.13 Series 1000 Grade 1 mechanical mortise lock. It has a reversible latch with stainless steel insert and an independent non-handed stainless steel deadlatch. The ML20900 ECL is available with 10 different electromechanical locking functions, optional deadbolt and multiple lever options • ANSI/BHMA A156.13 Series 1000 Grade 1 Certified • Meets A117.1 Accessibility Code Corbin Russwin’s products meet building codes that require hurricane, windstorm and FEMA certifications, including some of the most stringent building codes as specified in the Florida Building Code, Miami Dade Code and the International Building Code. Refer to the Corbin Russwin Website (www.corbinrusswin.com) for 2 specific code compliance listings for both the lock hardware and other door components. 2.2 Application The locks are designed for single or double leaf doors with mullions. The locks are typically installed in commercial buildings, such as • Commercial campuses • Colleges • Detention centers • Dormitories • Hospitals • Warehouses • Psychiatric wards • Any high abuse applications 2.3 Technical Data The table presents the technical properties of Corbin Russwin ML20900 ECL: Environmental Product Declaration Corbin Russwin - ML20900 ECL Electromechanical Mortise Lock Item Backset Door Thickness Bevel Door prep Handing Keying Power Consupmtion (Stand-by) PowerConsumption (idle) Power Consumption (peak) Value 2-3⁄4" (70mm) 1-3⁄4" (44mm) thick standard Front adjustable at any angle from flat to bevelled 1⁄8" (3mm) in 2" (51mm) ANSI/BHMA A156.115 or A156.115W modified per template field reversible Can be masterkeyed or grand masterkeyed. 0.0 Watts 0.0 Watts 0.204 Watts 2.4 Placing on the market / Application rules The products are subject to UL marking. Relevant norms are: ANSI/BHMA A156.13 American Standard for Mortise locks 2.5 Delivery status Delivered as a complete unit, inclusive of lockbody, trim, strike and fasteners or as separate lock case. Delivered in a box size 9" x 5.5" x 4.375" (229 x 140 x 111 mm). 2.6 Base materials / Ancillary materials The average composition of the Corbin Russwin Mortise lock is as following: Component Aluminum Brass Copper Plastic parts Stainless Steel Steel Zinc Electro mechanics Others Total Percentage in mass (%) 0.15 46.58 0.82 0.47 10.64 38.28 1.44 0.96 0.66 100.0 2.7 Manufacture Products are manufactured and assembled in the United States and are supported by tier-1 supplier in Mexico. The components come from processes such as stamped steel, zinc and steel casting. 2.8 Environment and health during manufacturing ASSA ABLOY is committed to integrating our sustainability efforts across the organization. Our priorities are to: reduce resource and energy consumption; reduce carbon emissions; improve water and waste management; improve health and safety performance in operations; improve sustainability performance within our supply chain and enhance the sustainability performance in ASSA ABLOY's supply of door opening solutions. Inspections, audits, and reviews are conducted periodically to ensure that applicable standards are met and environment management systems are evaluated. 3 Our Code of Conduct covers business ethics, workers' rights, human rights, environment and health & safety, consumer interests and community outreach. It provides the framework for ASSA ABLOY's daily operations. • The Berlin facility complies the requirements of the Code of Federal Requirements (CFR) 29 part 1910 General Industry and are under the oversight of the United States Department of Labor and the Occupational Safety and Health Administration. • The Berlin facility is currently certified to ISO 90012008. Upgrading to 9001-2014 in 2015. Lab Certification audit to ISO 17025 in Dec 2014. Working towards ISO 14000 with current goal of 1st qtr 2015. • Any waste metals (chips) during machining are separated and recycled. • Waste cleaners and rinses are processed internally in our Waste Water Treatment facility. • Waste solids are packaged and shipped offsite for treatment by a CT DEEP approved waste handler. 2.9 Product processing / Installation Corbin Russwin locks are distributed through, and installed by trained technicians, such as locksmiths or security technicians. Preparation of doors and frames are conducted at the door manufacturer’s production site. 2.10 Packaging All packaging is fully recyclable. The packaging material is composed by cardboard (app. 70%) and plastic foil (app. 30%). Material Cardboard/paper Plastics Total Value (%) 93.22 6.78 100.0 2.11 Condition of use Locks require no maintenance. 2.12 Environment and health during use There is no harmful emissive potential. No damage to health or impairment is expected under normal use corresponding to the intended use of the product. 2.13 Reference service life The reference service life of 30 years is based on a typical installation of a Corbin Russwin lock as a security lock operated when the facilities are to be closed or opened. If operations per day exceeds that typical wear the locks are exposed to the life time is limited to 1,000,000 cycles in accordance with ANSI/BHMA A156.13 Influences on ageing when applied in accordance with the rules of technology. 2.14 Extraordinary effects Fire Suitable for use in fire and smoke doors (listed by Underwriters Laboratories). Water Contain no substances that have any impact on water in case of flood. Environmental Product Declaration Corbin Russwin - ML20900 ECL Electromechanical Mortise Lock Mechanical destruction No danger to the environment can be anticipated during mechanical destruction. 2.15 Re-use phase The product is possible to re-use during the reference service life and be moved from one door to another. The lock can either be sent back to Corbin Russwin for recycling or to a professional recycling service provider. The majority, by weight, of components are aluminum, brass, steel, stainless steel and zinc, which can be recycled. The plastic components can be used for energy recovery in an incineration process. 2.16 Disposal The product can be mechanically dissembled to separate the different materials. 99.42% of the materials used are recyclable. The rest is disposed as a construction waste for landfill. 2.17 Further information Corbin Russwin 225 Episcopal Rd Berlin, CT 06037 USA Tel 800-543-3568 www.corbinrusswin.com 3. LCA: Calculation rules 3.1 Declared Unit The declaration refers to the functional unit of 1 piece of Corbin Russwin ML20900 ECL Electromechanical Lock as specified in Part B requirements on the EPD for Doors, windows, shutters, and related products/IBU PCR Part B/. Declared unit Name Declared unit Conversion factor to 1 kg Mass of product (without packaging) Value Unit 0.371 piece of motor lock - 2.693 kg 1 3.2 System boundary Type of the EPD: cradle to gate - with options. The following life cycle phases were considered for Motor Lock: A1-A3 Production stage: A1 – Raw material extraction and processing A2 – Transport to the manufacturer and A3 – Manufacturing A4-A5 Construction stage: A4 - Transport from the gate to the site A5 – Packaging waste processing The use stage: B2 - Maintenance (cleaning of the locks) Use stage related to the operation of the building includes: B6 – Operational energy use (energy consumption for lock operation) End-of-life stage: C2 – Transport to waste processing, C3 – Waste processing for recycling and C4 – Disposal (landfill). These information modules include provision and transport of all materials, products, as well as energy and water provisions, waste processing up to the endof-waste state or disposal of final residues. 4 Module D: Declaration of all benefits or recycling potential from EoL and A5 3.3 Estimates and assumptions Use phase: For the use phase, it is assumed that the lock is used in the America, thus an US electricity grid mix is considered within this stage. EoL: In the End-of-Life phase, for all the materials, which can be recycled, a recycling scenario with 100% collection rate was assumed. 3.4 Cut-off criteria In the assessment, all available data from the production process are considered, i.e. all raw materials used, auxiliary materials (e.g. lubricants), thermal energy consumption and electric power consumption - including material and energy flows contributing less than 1% of mass or energy (if available). In case a specific flow contributing less than 1% in mass or energy is not available, worst case assumption proxies are selected to represent the respective environmental impacts. Impacts relating to the production of machines and facilities required during production are out of the scope of this assessment. 3.5 Background data For life cycle modeling of the considered products, the GaBi 6 Software System for Life Cycle Engineering, developed by PE INTERNATIONAL AG, is used /GaBi 6 2013/. The GaBi-database contains consistent and documented datasets which are documented in the online GaBi-documentation /GaBi 6 2013D/. To ensure comparability of results in the LCA, the basic data of GaBi database were used for energy, transportation and auxiliary materials. 3.6 Data quality The requirements for data quality and background data correspond to the specifications of the /IBU PCR PART A/. PE INTERNATIONAL performed a variety of tests and checks during the entire project to ensure high quality of the completed project. This obviously includes an Environmental Product Declaration Corbin Russwin - ML20900 ECL Electromechanical Mortise Lock extensive review of project-specific LCA models as well as the background data used. The technological background of the collected data reflects the physical reality of the declared products. The datasets are complete and conform to the system boundaries and the criteria for the exclusion of inputs and outputs. All relevant background datasets are taken from the GaBi 6 software database. The last revision of the used background data has taken place not longer than 10 years ago. 3.7 Period under review The period under review is 2013/14 (12 month average). 3.8 Allocation Regarding incineration, the software model for the WIP is adapted according to the material composition and heating value of the combusted material. Following specific life cycle inventories for the WIP are considered: Waste incineration of plastic Waste incineration of paper Waste incineration of electronic scrap Regarding the recycling material of metals, the metal parts in the EoL are declared as end-of-waste status. Thus, these materials are considered in module D. Specific information on allocation within the background data is given in the GaBi dataset documentation. 3.9 Comparability Basically, a comparison or an evaluation of EPD data is only possible if all the data sets to be compared were created according to EN 15804 and the building context, respectively the product-specific characteristics of performance, are taken into account. 4. LCA: Scenarios and additional technical information Installation into the building (A5) Name Output substances following waste treatment on site (Paper packaging) Output substances following waste treatment on site (Paper packaging) Value Unit 0.31 kg Name 0.023 kg Maintenance (B2) Name Water for cleaning Other resources detergents Value Unit 1.0 0.1 kg/a kg/a Value Unit 30 a Reference service life Name Reference service life Reuse, recovery and/or recycling potentials (D), relevant scenario information Operational energy use (B6) and Operational water use (B7) Name Value Unit Electricity consumption (during lifetime) 0.093 kWh Value Unit 2.676 kg 0.018 kg 2.663 kg 0.013 kg 0.018 kg Collected separately waste ASSA Motor lock 810 (including packaging) Recycling Aluminium Recycling Brass Recycling Copper Reuse Plastic parts Recycling StainlessSteel Recycling Steel Recycling Zinc Recycling/Reuse Electronic (PWB) Reuse Paper packaging (from A5) Reuse Plastic packaging (from A5) Loss Construction waste for landfilling (no recycling potential) Value Unit 3.026 kg 0.13 41.46 0.73 0.42 9.47 34.07 1.28 % % % % % % % 0.86 % 10.25 % 0.75 % 0.58 % End of life (C1-C4) Name Collected separately Aluminum, Brass, Copper, Plastic parts, Stainless Steel, Steel, Zinc, Electro mechanics Collected as mixed construction waste Construction waste for landfilling Recycling Aluminum, Brass, Copper, Stainless Steel, Steel, Zinc, Electro mechanics Reuse Plastic parts Landfilling Construction waste for landfilling 5 Environmental Product Declaration Corbin Russwin - ML20900 ECL Electromechanical Mortise Lock 5. LCA: Results Results shown below were calculated using CML 2001 – Apr. 2013 Methodology. DESCRIPTION OF THE SYSTEM BOUNDARY (X = INCLUDED IN LCA; MND = MODULE NOT DECLARED) B6 X ReuseRecoveryRecyclingpotential B5 Disposal B4 Waste processing B3 MND MND MND Transport X De-construction demolition B2 MND Operational water use B1 X Operational energy use Maintenance A5 X 1) Use A4 X Refurbishment Assembly A3 X 1) Transport from the gate to the site A2 X Replacement Manufacturing A1 BENEFITS AND LOADS BEYOND THE SYSTEM BOUNDARYS END OF LIFE STAGE Repair Transport USE STAGE Raw material supply PRODUCT STAGE CONSTRUCTI ON PROCESS STAGE B7 C1 C2 C3 C4 D MND MND X X X X RESULTS OF THE LCA - ENVIRONMENTAL IMPACT: One piece of Corbin Russwin ML20900 ECL Electromechanical Lock Param eter Parameter GWP Global warming potential Unit A1 - A3 A4 A5 [kg CO2-Eq.] 1.94E+01 8.61E-02 5.15E-01 Depletion potential of the [kg CFC113.95E-09 4.12E-13 stratospheric ozone layer Eq.] Acidification potential of land and AP [kg SO2-Eq.] 8.63E-02 3.94E-04 water [kg (PO4)3-EP Eutrophication potential 6.28E-03 9.00E-05 Eq.] Formation potential of tropospheric [kg Ethen POCP 5.87E-03 -1.27E-04 ozone photochemical oxidants Eq.] Abiotic depletion potential for non ADPE [kg Sb Eq.] 3.05E-03 3.25E-09 fossil resources Abiotic depletion potential for fossil ADPF [MJ] 2.48E+02 1.19E+00 resources ODP B2 B6 C2 C3 C4 D 6.25E-02 7.18E-02 4.18E-03 3.77E-02 1.03E+00 2.06E+00 2.24E-12 6.81E-11 2.16E-11 3.44E-13 2.86E-12 1.15E-13 1.17E-10 1.20E-04 4.83E-02 2.11E-04 3.28E-04 1.97E-05 1.18E-05 1.07E-03 1.89E-05 2.88E-02 1.13E-05 7.50E-05 1.11E-06 1.24E-06 2.81E-04 8.05E-06 9.53E-04 1.29E-05 -1.06E-04 1.17E-06 6.81E-07 2.29E-04 1.30E-08 1.00E-06 8.26E-09 2.70E-09 5.78E-10 3.38E-09 2.93E-03 1.55E-01 5.91E+01 7.21E-01 9.90E-01 4.75E-02 2.01E-02 1.41E+01 RESULTS OF THE LCA - RESOURCE USE: One piece of Corbin Russwin ML20900 ECL Electromechanical Lock Parame ter Parameter Unit Renewable primary energy as PERE energy carrier Renewable primary energy PERM resources as material utilization Total use of renewable primary PERT energy resources Non renewable primary energy PENRE as energy carrier Non renewable primary energy PENRM as material utilization Total use of non renewable PENRT primary energy resources SM Use of secondary material Use of renewable secondary RSF fuels Use of non renewable NRSF secondary fuels Use of net fresh water FW A1 - A3 A4 A5 B2 B6 C2 C3 C4 D [MJ] 3.36E+01 - - - - - - - - [MJ] 0.00E+00 - - - - - - - - [MJ] 3.36E+01 4.68E-02 1.38E-02 1.18E+02 7.06E-02 3.90E-02 1.36E-02 1.68E-03 3.12E+00 [MJ] 2.85E+02 - - - - - - - - [MJ] 0.00E+00 - - - - - - - - [MJ] 2.85E+02 1.19E+00 1.80E-01 6.26E+01 9.13E-01 9.93E-01 7.44E-02 2.24E-02 1.66E+01 [kg] 4.32E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 [MJ] 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 [MJ] 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 [m³] 1.31E-01 3.30E-05 1.46E-03 6.30E-02 3.21E-04 2.75E-05 3.36E-05 9.13E-05 1.97E-02 RESULTS OF THE LCA – OUTPUT FLOWS AND WASTE CATEGORIES: One piece of Corbin Russwin ML20900 ECL Electromechanical Lock Paramet Parameter er HWD Hazardous waste disposed NHWD Non hazardous waste disposed RWD Radioactive waste disposed CRU Components for re-use MFR Materials for recycling MER Materials for energy recovery EEE Exported electrical energy EET Exported thermal energy 6 Unit A1 - A3 A4 A5 B2 B6 C2 C3 [kg] [kg] [kg] [kg] [kg] [kg] [MJ] [MJ] 1.20E-02 1.49E+00 1.44E-02 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 2.72E-06 1.50E-04 1.56E-06 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 1.24E-05 1.81E-02 9.86E-06 0.00E+00 3.10E-01 0.00E+00 7.01E-01 1.97E+00 3.67E-03 4.37E-01 1.40E-03 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 7.11E-07 2.91E-04 7.52E-05 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 2.26E-06 1.25E-04 1.30E-06 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 1.03E-05 2.40E-05 1.07E-05 0.00E+00 2.63E+00 0.00E+00 0.00E+00 0.00E+00 C4 D 1.82E-06 2.66E-03 2.09E-02 -7.15E-01 9.05E-07 9.95E-04 0.00E+00 0.00E+00 0.00E+00 6.54E-02 1.80E-01 - Environmental Product Declaration Corbin Russwin - ML20900 ECL Electromechanical Mortise Lock 6. LCA: Interpretation This chapter contains an interpretation of the Life Cycle Impact Assessment categories. Stated percentages in the whole interpretation are related to the overall life cycle, excluding credits (module D). The production phase (modules A1-A3) contributes between 63% and 99% to the overall results for all the environmental impact assessment categories hereby considered, except for the eutrophication potential (EP), for which the contribution from the production phase accounts for app. 18%. Within the production phase, the main contribution for all the impact categories is the production of steel, with app. 61%, mainly due to the energy consumption on this process. Steel and brass account in total with app. 84% to the overall mass of the product, therefore, the impacts are in line with the mass composition of the product. The environmental impacts for the transport (A2) have a negligible impact within this stage. Relatively high impact on EP (81%) during the maintenance phase (module B2) is a result of generated waste water during maintenance of the product. Eutrophication is the enrichment of nutrients in a certain place and it can be aquatic or terrestrial. Waste water contributes to eutrophication therefore, as expected, it is mainly related with the maintenance of the product (B2). In the end-of-life phase, there are loads and benefits (module D, negative values) considered. For the components containing brass, the value of scrap input in the production process is higher than the value of scrap output from the recycling process. Therefore, there is an environmental burden instead of credit in the End-of-Life. The benefits and loads are considered beyond the system boundaries and are declared for the recycling potential of the metals and for the credits from the incineration process (energy substitution). 7. Requisite evidence Not applicable in this EPD. 8. References Institut Bauen und Umwelt Institut Bauen und Umwelt e.V., Berlin (pub.): Generation of Environmental Product Declarations (EPDs); ISO 14001 ISO 14001: Environmental management systems Requirements with guidance for use (ISO 14001:2004 + Cor. 1:2009) General principles for the EPD range of Institut Bauen und Umwelt e.V. (IBU), 2013-04 www.bau-umwelt.de ISO 14025 ISO 14025:2011-10: Environmental labels and declarations — Type III environmental declarations — Principles and procedures IBU PCR Part A IBU PCR Part A: Institut Bauen und Umwelt e.V., Berlin (pub.): Product Category Rules for Construction Products from the range of Environmental Product Declarations of Institut Bauen und Umwelt (IBU), Part A: Calculation Rules for the Life Cycle Assessment and Requirements on the Background Report. April 2013 www.bau-umwelt.de EMC directive (2004/108/EC) EMC directive (2004/108/EC): Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC. IBU PCR Part B IBU PCR Part B: PCR Guidance-Texts for BuildingRelated Products and Services. From the range of Environmental Product Declarations of Institute Construction and Environment e.V. (IBU). Part B: Requirements on the EPD for Locks and fittings. www.bau-umwelt.com ANSI/A117.1 ANSI/A117.1: Accessible and Usable Buildings and Facilities ANSI/BHMA A156.13 ANSI/BHMA A156.13: Mortise Locks EN 15804 EN 15804: 2012+A1:2014: Sustainability of construction works — Environmental Product Declarations — Core rules for the product category of construction products Florida Building Code Approved (FL#14307) Florida Building Code: 2010 Florida Building Code, Building contains substantial copyrighted material from the 2009 International Building Code which is a copyrighted work owned by the International Code Council, Inc http://www2.iccsafe.org/states/florida_codes/ GaBi 6 2013 GaBi 6 2013: Software-System and Database for Life Cycle Engineering. Copyright, TM. Stuttgart, Echterdingen, 1992-2013. ASTM F1577-95b ASTM F1577-95b: Detention Locks for Swinging Doors 7 Environmental Product Declaration Corbin Russwin - ML20900 ECL Electromechanical Mortise Lock GaBi 6 2013D GaBi 6 2013D: Documentation of GaBi 6: SoftwareSystem and Database for Life Cycle Engineering. Copyright, TM. Stuttgart, Echterdingen, 1992-2013. http://documentation.gabi-software.com/ ICC IBC(2009) ICC IBC (2009): International Building Code. A member of the international code family®. www.iccsafe.org UL and ULc Standards ULC Standards develops and publishes standards and specifications for products having a bearing on fire, life safety and security, crime prevention, energy efficiency, environmental safety, security of assets and facilities, live working and workplace safety and other areas. ULC Standards is accredited by the Standards Council of Canada as a consensus based Standards Development Organization under the National Standards System of Canada. Miami Dade Code © 2014 Miami-Dade County government. http://www.miamidade.gov 8 Environmental Product Declaration Corbin Russwin - ML20900 ECL Electromechanical Mortise Lock 9. Annex Results shown below were calculated using TRACI Methodology. DESCRIPTION OF THE SYSTEM BOUNDARY (X = INCLUDED IN LCA; MND = MODULE NOT DECLARED) PRODUCT STAGE CONSTRUCTI ON PROCESS USE STAGE BENEFITS AND LOADS BEYOND THE SYSTEM BOUNDARYS END OF LIFE STAGE Repair Replacement Refurbishment B2 B3 B4 B5 X X X X X MND X B6 1) MND MND MND X ReuseRecoveryRecyclingpotential Maintenance B1 Disposal Use A5 Waste processing Assembly A4 Transport Transport from the gate to the site A3 De-construction demolition Manufacturing A2 Operational energy use Operational water use Transport A1 1) Raw material supply STAGE C1 C2 C3 C4 D X X X X B7 MND MND RESULTS OF THE LCA - ENVIRONMENTAL IMPACT: One piece of Corbin Russwin ML20900 ECL Electromechanical Lock Parameter Parameter Unit GWP Global warming potential A1-3 A4 A5 [kg CO2-Eq.] 1.94E+01 8.61E-02 5.15E-01 Depletion potential of the [kg CFC114.22E-09 stratospheric ozone layer Eq.] Acidification potential of land AP [kg SO2-Eq.] 8.44E-02 and water EP Eutrophication potential [kg N-eq.] 5.03E-03 Ground-level smog formation Smog [kg O3-eq.] 9.92E-01 potential Resources [MJ] 2.32E+01 ODP B2 B6 C2 C3 C4 D 6.25E-02 7.18E-02 4.18E-03 3.77E-02 1.03E+00 2.06E+00 4.38E-13 2.38E-12 7.23E-11 2.30E-11 3.65E-13 3.04E-12 1.23E-13 1.05E-10 5.15E-04 1.44E-04 5.67E-02 1.97E-04 4.29E-04 1.87E-05 1.39E-05 9.74E-04 3.64E-05 7.68E-06 4.48E-02 9.70E-06 3.03E-05 7.94E-07 6.20E-07 1.71E-04 1.06E-02 3.01E-03 2.40E-01 1.68E-03 8.83E-03 1.69E-04 1.78E-04 -1.46E-03 1.71E-01 1.78E-02 7.67E+00 4.25E-02 1.42E-01 3.38E-03 2.13E-03 1.99E+00 RESULTS OF THE LCA - RESOURCE USE: One piece of Corbin Russwin ML20900 ECL Electromechanical Lock Parameter PERE PERM PERT PENRE PENRM PENRT SM RSF NRSF FW Parameter Renewable primary energy as energy carrier Renewable primary energy resources as material utilization Total use of renewable primary energy resources Non renewable primary energy as energy carrier Non renewable primary energy as material utilization Total use of non renewable primary energy resources Use of secondary material Use of renewable secondary fuels Use of non renewable secondary fuels Use of net fresh water Unit A1-3 A4 A5 B2 B6 C2 C3 C4 D [MJ] 3.36E+01 - - - - - - - - [MJ] 0.00E+00 - - - - - - - - [MJ] 3.36E+01 4.68E-02 1.38E-02 1.18E+02 7.06E-02 3.90E-02 1.36E-02 1.68E-03 3.12E+00 [MJ] 2.85E+02 - - - - - - - - [MJ] 0.00E+00 - - - - - - - - [MJ] 2.85E+02 1.19E+00 1.80E-01 6.26E+01 9.13E-01 9.93E-01 7.44E-02 2.24E-02 1.66E+01 [kg] 4.32E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 [MJ] 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 [MJ] 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 [m³] 1.31E-01 3.30E-05 1.46E-03 6.30E-02 3.21E-04 2.75E-05 3.36E-05 9.13E-05 1.97E-02 RESULTS OF THE LCA – OUTPUT FLOWS AND WASTE CATEGORIES: One piece of Corbin Russwin ML20900 ECL Electromechanical Lock Parameter 9 Parameter Unit A1-3 A4 A5 B2 B6 C2 C3 C4 D HWD Hazardous waste disposed [kg] 1.20E-02 2.72E-06 1.24E-05 3.67E-03 7.11E-07 2.26E-06 1.03E-05 1.82E-06 2.66E-03 NHWD Non hazardous waste disposed [kg] 1.49E+00 1.50E-04 1.81E-02 4.37E-01 2.91E-04 1.25E-04 2.40E-05 2.09E-02 -7.15E-01 RWD Radioactive waste disposed [kg] 1.44E-02 1.56E-06 9.86E-06 1.40E-03 7.52E-05 1.30E-06 1.07E-05 9.05E-07 9.95E-04 CRU Components for re-use [kg] 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 - MFR Materials for recycling [kg] 0.00E+00 0.00E+00 3.10E-01 0.00E+00 0.00E+00 0.00E+00 2.63E+00 0.00E+00 - MER Materials for energy recovery [kg] 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 - EEE Exported electrical energy [MJ] 0.00E+00 0.00E+00 7.01E-01 0.00E+00 0.00E+00 0.00E+00 0.00E+00 6.54E-02 - EET Exported thermal energy [MJ] 0.00E+00 0.00E+00 1.97E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 1.80E-01 - Environmental Product Declaration Corbin Russwin - ML20900 ECL Electromechanical Mortise Lock Publisher Institut Bauen und Umwelt e.V. Panoramastr. 1 10178 Berlin Germany Tel Fax Mail Web +49 (0)30 3087748- 0 +49 (0)30 3087748- 29 info@bau-umwelt.com www.bau-umwelt.com Programme holder Institut Bauen und Umwelt e.V. Panoramastr 1 10178 Berlin Germany Tel Fax Mail Web +49 (0)30 - 3087748- 0 +49 (0)30 – 3087748 - 29 info@bau-umwelt.com www.bau-umwelt.com Author of the Life Cycle Assessment PE INTERNATIONAL AG Hauptstraße 111 70771 Leinfelden-Echterdingen Germany Tel Fax Mail Web +49 711 34 18 17 22 +49 711 34 18 17 25 consulting@pe-international.com www.pe-international.com Owner of the Declaration Corbin Russwin 225 Episcopal Rd Berlin, CT 06037 USA Tel 800-543-3568 Web www.corbinrusswin.com www.assaabloydss.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res Author : AMusanti Create Date : 2015:06:10 14:20:27-04:00 Modify Date : 2015:06:10 14:20:44-04:00 Title : Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2015:06:10 14:20:44-04:00 Creator Tool : Adobe Acrobat Pro 10.1.2 Format : application/pdf Creator : AMusanti Document ID : uuid:04a04c60-1ca3-40cd-a29f-ed74a1cf0f8c Instance ID : uuid:015a9010-2d79-4a9e-8179-e7a3e7066293 Producer : Adobe Acrobat Pro 10.1.2 Page Count : 11EXIF Metadata provided by EXIF.tools