Corsran Technology S800 Water-proof Bluetooth Sports Earphones User Manual

Shenzhen Corsran Technology Co., Ltd. Water-proof Bluetooth Sports Earphones

user manual

User Manual 1. Wearing 1.1 Position to wear: Please refer to the below picture. 1.2 Right and Left Earphone Right Left 2. Specifications Bluetooth version: Bluetooth 4.2 Supporting profiles: A2DP, AVRCP, HFP, HSP Music playback time: 7 hours Talking time: 8 hours Standby time: 8 days Charging time: 1.5 hours Charge port: Micro USB Type B Wireless range: 10-15m (Free space) Battery status display on IOS device: yes Weight: 13.8gx2 Dimension (L*W*H): 60*50*26mm 3. Operations Function Operation Power on Long press the MFB for 2 seconds till the Indicator Light become red Power off Long press the MFB for 3 seconds till the Indicator Light go out In paring mode Long press the MFB for about 5 seconds till the Indicator Light entering into red and blue flashing status Answering call Short press the MFB 1 time to connect End call Short press the MFB 1 time to disconnect Reject call Short press the MFB 2 times to reject call Pause, Play Short press the MFB 1 time Next song Short press the MFB 2 times 3.1 How to connect S800 with cell phones Step 1: Long press the MFB of the either Right or Left Earphone for about 5 seconds till the Indicator LED Light entering into red & blue flashing status. Step 2: Turn on the Bluetooth mold of your mobile phones and search Bluetooth devices. Step 3: Select S800 to connect. The earphone paired to your mobile phone first is the main device. Step 4: Press the MFB of the other earphone (auxiliary earphone) for about 3 seconds till the light turn on. Release it. The auxiliary earphone connect to the main earphone automatically if the Indicator LED Light of the auxiliary earphone entering into blue flashing status. 3.2 How to reconnect S800 with cell phones 3.2.1 The devices will reconnect with your mobile phones automatically after “power on” (not in pairing mode). 3.2.2 If the devices cannot reconnect, please press the MFB for about 5 minutes to do re-pairing.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu