Cosonic Acoustic Technology HXHP610 Jam Fusion User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2069826
Application ID	OIYoQrig6w0GwU9ozWP8qg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.39kB (267359 bits)
Date Submitted	2013-09-12 00:00:00
Date Available	2013-09-12 00:00:00
Creation Date	2013-08-27 11:15:07
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2013-08-27 11:15:09
Document Title	User Manual
Document Creator	Adobe InDesign CS6 (Macintosh)

For detailed Warranty Instructions and Information visit: http://www.hmdxaudio.com/
products/jam-wireless-portable-speaker.html. To obtain warranty service on your HMDX
product, contact a Consumer Relations Representative by telephone at 1-800-753-3000 or
email cservice@hmdxaudio.com for assistance. Please make sure to have the model number
of the product available. Representatives are available 8:30am–7:00pm EST Monday–Friday.
Por manual de instrucciones e Información de garantía en español visítenos en
www.hmdxaudio.com
HMDX Jam and HMDX are trademarks of HMDX.
©2013 HMDX. All Rights Reserved.
IB-HXHP610
PLEASE TAKE A MOMENT NOW
AND REGISTER YOUR PRODUCT AT:
www.hmdxaudio.com
Your valuable input will help us create
even better products in the future.
WIRELESS STEREO HEADPHONES
USER GUIDE AND WARRANTY INFORMATION
Thank you for spreading the Jam and purchasing the HMDX Jam
Fusion Wireless Headphones. Be sure to check out the entire JAM
product line on our website: www.hmdxaudio.com — Where there’s
a Jam there’s a party!
Package Contents
Charging the Unit
Allow approximately 3 hours for a full charge. Can be charged by using the
USB to Micro USB cord (included) through computer or AC adapter with USB
jack (not included).
NOTE:
• Battery will last up to 6 hours when connected wirelessly.
• If battery is depleted you can still listen to music through the AUX line-in jack.
• 3 tones will sound every 40 seconds when less than 10% battery life remains.
Indicators
USB Cord
Battery
Indicator
Jam Fusion
Pouch
3.5MM AUX
Cable
User Manual
Status
Bluetooth®
Indicator
Status
Solid RED
Charging
Quickly
Flashes BLUE
Pairing Mode
Solid BLUE
Fully Charged
Slowly Flashes
BLUE
Paired
Pairing a Single Jam Fusion Headphone
Controls
1. Line-In Audio Jack
2. Jam2 Pairing Switch
3. Forward
4. Volume Up
5. Power Button
6. Play/Pause
7. Volume Down
8. Reverse
9. Battery Status &
Bluetooth® Indicator
10. USB Charging Port
FIG. 1
10
FIG. 2
1. Make sure your device has Bluetooth® capability.
2. Make sure Jam2 pairing switch is in single position (see Fig. 2).
3. Press and hold power button for 5 seconds; indicator will
begin to flash.
4. Pair your device with the unit by selecting Jam Fusion from
your Bluetooth® listings.
5. Press play and use controls on the unit to adjust desired
volume, forward to next track or repeat track.
NOTE:
• Once you have successfully paired your device, you may not
need to repeat the above steps. Please ensure the AUX cable is
unplugged and your device has been Bluetooth® enabled.
• When pairing with a computer, please consult your computer manufacturer
for Bluetooth® pairing instructions and/or the latest Bluetooth® Drivers.
• A pairing code is not required.
Pairing 2 Jam Fusion Headphones
1. Pair one headphone to your device by following the single
pairing instructions.
2. Move the Jam2 pairing switch to the Jam2 position on first
headphone (see Fig. 3).
3. On the second headphone, move Jam2 switch to the Jam2
position and power on.
4. The Bluetooth® indicator light will flash quickly until the units are
paired. Once paired you will hear a hint tone and the Bluetooth®
indicator will slowly flash blue.
NOTE: Jam2 indicator will flash white when successfully paired.
FIG. 3
Listening to your device through Auxiliary Line-In Audio Jack
1. Connect AUX cable to the headphone or line-out jack of an audio device
and plug the other end of the cable into the line-in audio jack on the unit.
2. Press PLAY on device and use device controls to adjust volume or
FWD/RVS tracks.
NOTE:
• Auxiliary line-in is a passive feature and does not require the power to be on.
• When listening through auxiliary line-in, the controls on the Fusion are disabled,
always use the controls on your device.
Built-In Speakerphone
The Jam Fusion is equipped with a built-in speakerphone, for easy hands free talking:
1. Make sure the Jam Fusion has been successfully paired with y our device.
2. To answer a call, simply press any button when you hear a ringtone.
3. To end call, press any button except +/- Volume buttons.
NOTE:
• When an incoming or outgoing call is detected, the Fusion will pause the music
and a ringtone will sound. After the call is terminated, the music will resume to
play automatically where it left off.
• When making a call, use your phone to dial.
• To refuse an incoming call press and hold any button for 3 seconds.
• If the Jam Fusion is connected to the AUX cable when an incoming call is
detected, use your phone to answer or refuse the call
Maintenance
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
FCC Warning
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Only use a soft dry cloth to clean the enclosure of the unit. NEVER use liquids or
abrasive cleaner to clean.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
Changes or modifications not expressly approved by HMDX could void the user's
authority to operate the equipment.
IMPORTANT SAFEGUARDS:
When using an electrical product, basic precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING
WARNING:
• Do not place speakers too close to ears. May cause damage to ear drums,
especially in young children.
• Use this product only for its intended use as described in this manual. Do not use
attachments not recommended by HMDX.
• HMDX is not liable for any damage caused to Smartphones, iPod/MP3 player or any
other device.
• Do not place or store this product where it can fall or be dropped into a
tub or sink.
• Do not submerge into water or any other liquid.
• Not for use by children. THIS IS NOT A TOY.
• Never operate this product if it has a damaged cord, plug, cable or housing.
• Keep away from heated surfaces.
• Only set on dry surfaces. Do not place on surface wet from water or cleaning
solvents.
• This product has an internal, non-replaceable lithium battery. Please dispose in
accordance with your local sate, providence and country guidelines.
IC warning:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2013:08:27 11:15:07-04:00
Metadata Date                   : 2013:08:27 11:15:09-04:00
Modify Date                     : 2013:08:27 11:15:09-04:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:7df89308-8d20-3a43-a4d7-e95e1fbda9f2
Original Document ID            : xmp.did:74117FE3200711688838E2B0976BD8D8
Document ID                     : xmp.id:DCF37A79072068118083F6743A839DCC
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:00801174072068118083F6743A839DCC
Derived From Document ID        : xmp.did:68B2FA31092068118083BAB2EEB6DE47
Derived From Original Document ID: xmp.did:74117FE3200711688838E2B0976BD8D8
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2013:08:27 11:15:07-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 6
Creator                         : Adobe InDesign CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools