Cotton On USA 140299-00 Karaoke Microphone User Manual MA 2849 IM
Cotton On USA Inc Karaoke Microphone MA 2849 IM
User Manual
Bluetooth Karaoke Microphone Instruction Manual 1. Button Functions Microphone Voice volume control Mixing strength Device body Audio input (to connect earphone) ON/OFF Indicator Charging/ Record/ Audio port, Input 5V 0.5A Output 5V-2A (Charging for mobile-phone) Speaker 2. Accessories USB cable audio cable 3. Functions 3.1 How to listen to music/record music/sing songs 1.Turn the device on, the blue LED on. 2.Bluetooth connection: turn on the Bluetooth on the mobile phone’ setting, then searching “Typo Microphone”, and click it to connect Bluetooth. 3. After successful connected, you will hear a short tone.(The password is “0000” if needed.) 4. Play music: Turn on the music player APP in your mobile phone. Download and play the music or accompaniment, you can adjust the volume via mobile phone. Remark: After connected successfully with mobile phone, the Bluetooth will automatically connect with the mobile phone next time. 3.2 How to Sing a song/record a song/listen to a song 1. Connect the Bluetooth Karaoke Microphone Speaker and mobile phone with micro-audio cable, now the Bluetooth will be automatically disconnected. 2. Open the singing APP on your mobile, choose your favorate song, singing/recorde as per the APP instruction. 3.3 You can connect the 3.5mm plug on Bluetooth Karaoke Microphone Speaker with a 3.5mm earphone, to listen music by earphone also. 4. How to charge the speaker 1.When the battery capacity is low, the speaker will power off automatically. 2.Charge the Bluetooth Karaoke Microphone Speaker with provided USB cable. Red LED on when it is in charging. 3.The Bluetooth Karaoke Microphone Speaker need about 2 hours to full charged. 4.It is very important that you need to turn off the Bluetooth Karaoke Microphone Speaker before charging with a power bank.. 5.using the provided charging cable to connect the Bluetooth Karaoke Microphone Speaker with power bank is also OK to charging for Bluetooth Karaoke Microphone Speaker. 5. How to use Bluetooth microphone charging for your other electronic devices You can use this Bluetooth Karaoke Microphone Speaker charging for your other electronic devices such as mobile-phone, MP3, and so on. Just connect the USB port of the Bluetooth Karaoke Microphone Speaker with your other device’ input port. This is power bank function of this product. 6. Specification Charging port Input: DC5V 0.5A (Charging for Bluetooth Microphone) USB port Output: 5V 2A (Charging for mobile-phone) Product Length: 22cm Product Dimension: 65mm Product Weight: 250g Speaker Horn: 3W, 4Ω,52mm, Speaker Frequency: 20Hz-20KHz Speaker Maximum sound pressure level: >115dB 1KHz THD<1% Microphone Dimension: 3.5*4cm Microphone Direction: Omnidirectional Microphone SPL: -42 ±2dB Microphone Resistance: ≤2.2kΩ Microphone Frequency: 100Hz-10000Hz Battery: Li-ion battery 1200mAh 7. FCC statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Administrator Create Date : 2017:04:01 10:29:18+08:00 Modify Date : 2017:04:01 10:29:18+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Administrator Title : Microsoft Word - MA-2849?IM Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:6ac270a1-6588-4fb3-9345-8fbadeca489d Instance ID : uuid:8ffd11ce-8c06-4ef9-8b30-187de1828fbb Page Count : 4EXIF Metadata provided by EXIF.tools