Coulisse ABC01 Remote for controlling indoor blinds User Manual FCCManualZY4ABC01 indd

Coulisse B.V. Remote for controlling indoor blinds FCCManualZY4ABC01 indd

Contents

manual part 2

12.9.2011FCC Manual Regulatory informationThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC ID: ZY4ABC011 FCC Information to UserThis product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifi cations will invalidate all applicable regulatory certi-fi cations and approvals.2 FCC Guidelines for Human ExposureWarning:In order to comply with RF exposure limits, the user is advised to maintain a distance of at least 20 cm from the antenna structure of this device while it is in use.3 FCC Electronic Emission NoticesThis device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:1. This device may not cause harmful interference2. This device must accept any interference received, including interference that may cause unde-sired operation.4 FCC Radio Frequency Interference statementThis equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference when the equipment is operated in a commercial environment. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.Operation of this equipment in a residential area may cause harmful interference, in which case the userwill be required to correct the interference at his own expense.If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected• Consult the dealer or an experienced radio/TV technician for help

Navigation menu